PENDEJATO SL-013B02 Bidet Owner’s Manual
- June 16, 2024
- PENDEJATO
Table of Contents
OWNER’S MANUAL
SL-013802 Bidet
ACCESSORIES
Tips:
The included parts meet plumbing standards of the country of sale. However,
some homes may have alternative sized fittings or the hose is too short to
connect. If the included parts do not work for your setup please contact us
right away for assistance with alternative parts.
3 WAYS TO CONNECT THE T-ADAPTER
(Please choose a suitable solutions according the pipe of your toilet)
Water valve
Solution 1.
The provided T-adapter should be installed at the fill valve under the toilet
tank.
Toilet tank water inlet
Solution 2.
Connect the provided T-adapter to the water valve on the wall (As the picture
show).
Washbowl
Solution 3.
Connect the provided T-adapter to the water valve under the washbow.
INSTALLATION STEPS
Step 1 – Turned off the water supply and empty the toilet tank.
Step 2 – Remove the toilet seat.
Attension: The original bolts and screws should be removed together and
set them aside.
Important: Make sure that all bolts and screws are removed from the
toilet bowl.
The toilet bowl should not have any bolts or screws before mounting the bidet!
Step 3 – Insert the rubber non-slip mats to the bottom of the bidet.
Step 4 – Mount Your Bidet on the Toilet
You may need to rotate the adjustment plates accordingly to line up properly
with the holes.Then reattach the toilet seat on top of the bidet attachment
and secure to use the original bolts and screws
Step 5 – Disconnect the Water Ssupply Hose
Step 6 – Check the T-adapter
Make sure that there is a black rubber washer inserted at the top of the
t-adapter. If it is not already there, insert the black rubber washer so it is
securely in place, as shown in the picture.
Step 7 – Install the T-adapter to the Toilet Tank
Connect the top of the t-adapter to the toilet tank and the bottm of the
t-adapter to the water supply hose.
PRO TIP: Do not overtighten connections. Simply turn the connection by
hand then use the wrench to tighten a quarter turn more.
Step 8 – Connect the hose provided to the bidet and T-adapter
If the hose is too short.pleoss contact us.
Congratulations! You are ready to use the Bidet for the firs time. Gently turn the water pessre control knob to reach your desired spray pessure.
Scan this QR code to access detailed installation instructions.
Documents / Resources
|
PENDEJATO SL-013B02
Bidet
[pdf] Owner's Manual
SL-013B02 Bidet, SL-013B02, Bidet
---|---