PENDEJATO Bidet-19092506 Bidet raiser User Manual
- June 16, 2024
- PENDEJATO
Table of Contents
PENDEJATO Bidet-19092506 Bidet raiser User Manual
NAMES AND FUNCTIONS OF PARTS
INSTALLATION STEPS
Step 1 – Turned off the water supply and empty ~ the toilet tank.
Step 2 – Remove the toilet seat.The original bolts and screws should be removed together.
Step 3 – Place the bidet attachment on the toilet.You need to rotate the adjustment plates accordingly to line up properly with the holes on the toilet.
Step 4 – Reattach the toilet seat on top of the bidet attachment and secure to use the original bolts and screws.
Step 5- screw off the water hose underneath the toilet tank. Connect the
T-vave to the water supply inlet, and make sure the rubber washer is properly
located inside the nut with the narrow side upward. Attach the water supply
hose to the bottom of the T-valve.
Step 6- Connect the stainless steel hose (provided) to the T-valve and bidet.
Scan this QR Code to access detailed installation instructions