PENDEJATO Ultra Slim Bidet Attachment for Toilet Instruction Manual
- June 14, 2024
- PENDEJATO
Table of Contents
PENDEJATO Ultra Slim Bidet Attachment for Toilet
NAMES AND FUNCTIONS OF PARTS
Installation Tools Needed (both tools are not included)
-
Wrench
-
Screwdriver
INSTALLATION STEPS
Step 1 – Turned off the water supply and empty the toilet tank.
Step 2 – Remove the toilet seat.The original bolts and screws should be removed together.
Step 3 – Place the bidet attachment an the toilet. You need to rotate the adjustment plates accordingly to line up properly with the holes on the toilet.
Step 4 – Reattach the toilet seat on top of the bidet attachment and secure to use the original bolts and screws.
Step 5- Screw off the water hose underneath the toilet tank. Connect the T-valve to the water supply inlet, and make sure the rubber washer is properly located inside the nut with the narrow side upward. Attach the water supply hose to the bottom of the T-valve.
Step 6- Connect the stainless steel hose (provided) to the T-valve and bidet.
Scan this QR Code to access detailed installation instructions
Documents / Resources
|
PENDEJATO Ultra Slim Bidet Attachment for
Toilet
[pdf] Instruction Manual
Ultra Slim Bidet Attachment for Toilet, Slim Bidet Attachment for Toilet,
Bidet Attachment for Toilet, Attachment for Toilet, Toilet
---|---