TnB CLOCKCH5W Wireless Charger LED Clock Instructions
- June 16, 2024
- TnB
Table of Contents
TnB CLOCKCH5W Wireless Charger LED Clock Instructions
OUR THANKS
Congratulations on your purchase and thank you for the trust you have placed in T’nB. Our products comply with the all relevant regulations and standards. Before using this equipment, we recommend that you read the instructions and safety instructions carefully and keep this manual for future reference.
IMPORTANT SAFETY INSTRUCTIONS
- No guarantee will apply in case of misuse.
- T’nB accepts no liability if the safety instructions are not respected.
- Handle the device with care.
- The power supply of your device must match the initially specified characteristics
- The socket of the electrical equipment must be located near the said equipment and easy to get to. -Keep the device away from flammable objects, explosive substances or dangerous objects.
- Use and store your device in an environment where the temperature is between 0°C and 40°C. -Store your device out of the reach of children.
- This device is not designed to be used by persons (including children) whose physical, sensory or mental capacities are reduced, or persons without experience or knowledge, except if they are supervised or receive prior instruction on using the device by a person in charge of their safety.
- Do not disassemble your device and do not attempt to repair or modify it yourself.
- Stop using your device if it has been hit or damaged.
- To avoid the risk of electric shock, disconnect your device from the mains and from any other device before cleaning it or when not in use.
- Only use the supplied accessories and connectors. The use of any other type of accessory not intended for this purpose may irremediably damage your device.
- Make sure the appliance is switched off and cold before cleaning. Do not use any product or lubricant which may damage the appliance. T’nB accepts no liability for damage caused by misuse of the product or by use with an incompatible electrical device.
- Unless otherwise stated, never use your device in rain, in damp places or near a water source. Unless otherwise stated, this product is for indoor use only.
DESCRIPTION
- SET button
- UP button
- DOWN button
- Reset
- Power socket
POWER SUPPLY
This alarm clock can be powered with the power supply cable provided by plugging the jack connector into the port (5) and the USB connector into the device with a USB output (USB charger, television, computer, etc.) or with 4 AAA batteries (unapplied). To use the product with batteries, please first remove the plastic present in the battery compartment.
FUNCTIONS
Wireless charging
To recharge your smartphone, simply place it on the alarm clock. For the
wireless charging to work, the alarm clock must be powered with the USB cable;
this function will not work if the alarm clock is powered with batteries.
Setting the date, time and alarm
Hold down the “SET” button for 3 seconds to go to setting mode. The display
will start to flash. To switch between settings, press the SET button once.
The order of the settings options is as follows:
-
YEAR: Use the “UP” and “DOWN” buttons to change the year
-
MONTH: Use the “UP” and “DOWN” buttons to change the month
-
DATE: Use the “UP” and “DOWN” buttons to change the date
-
TIME FORMAT: Use the “UP” and “DOWN” buttons to switch between the 12 hour and 24 hour clock (in 12 hour clock mode, a light will come on at the top left to indicate afternoon)
-
TIME: Use the “UP” and “DOWN” buttons to change the hour
-
MINUTES: Use the “UP” and “DOWN” buttons to change the minutes
-
ALARM 1: Press the “UP” or DOWN” button again to activate the alarm. When the alarm is activated, the screen displays “on: A1″, otherwise it will display”-: A1″
-
SETTING ALARM 1: Use the “UP” and “DOWN” buttons to change the hour then the minutes of the alarm
-
ALARM 2: Press the “UP” or DOWN” button again to activate the alarm. When the alarm is activated, the screen displays “on: A2″, otherwise it will display”-: A2″
-
SETTING ALARM 2: Use the “UP” and “DOWN” buttons to change the hour then the minutes of the alarm
-
ALARM 3: Press the “UP” or DOWN” button again to activate the alarm. When the alarm is activated, the screen displays “on: A3″, otherwise it will display”-: A3″
-
SETTING ALARM 3: Use the “UP” and “DOWN” buttons to change the hour then the minutes of the alarm
-
WEEKEND MODE: Press the “UP” or DOWN” button once to activate the mode. When it is activated, the screen displays “on: E”, otherwise, it will display”-: E”. Activating this mode automatically deactivates the alarm for Saturday and Sunday: it will be activated from Monday to Friday.
Turning off the alarm
The alarm will sound for one minute. You can switch it off by pressing one of
the buttons on the back of the alarm clock.
Selecting the display mode
There are two modes available:
- DP1: Display the time, date and temperature in turn
- DP2: Display the time and temperature only
By default, the DP1 mode is activated. To switch between modes, press the “SET” button once.
Brightness
Press the “UP” button for 3 seconds to set the display brightness. Press the
“UP” and “DOWN” buttons to choose from the 3 levels of brightness, from L1
(brightest) to L3 (dimmest). The brightness will dim automatically between 6
pm and 7 am.
Voice recognition
When the “voice recognition” mode is activated, the LED display will go into
the sleep mode after 15 seconds. In this mode, the alarm clock will switch to
energy saving mode if it is operated by batteries. When the screen is off,
activate it by tapping the top of the alarm clock or using voice recognition
by speaking near it.
To activate this mode, press the “DOWN” button once. Display “on: Sd” means
that this mode is activated. To deactivate it, press the “DOWN” button once.
When the display shows”–: Sd”, this means. that the voice command is not
active.
Temperature display
To change the temperature display between degrees Celsius and degrees
Fahrenheit, press the “UP” button once.
Resetting the settings
You can reset all settings by pressing one of the buttons on the “RESET”
button on the back of the alarm clock.
FEATURES
Power supply : USB 5V 1,5A (cable supplied) or 4 AAA 1.5 V batteries (not
supplied) CR2032 button battery has backup function
Output : 5V1A
Power : 5 W
Dimensions : 150 x 71 x 74 mm
Composition : PVC and MDF
NEED HELP?
Concerned about the satisfaction of our customers, you can contact us at
info@t-nb.com. Maintenance, troubleshooting, miscellaneous information about
this product, please visit our website: www.t-nb.com
- This product contains a button battery. Swallowing the battery may cause serious internal burns in
- Keep new and used batteries out of the reach of children. just 2 hours and may cause death.
- If the battery compartment does not close properly, do not use the product and keep it out of the reach of children.
- If you think that any batteries have been swallowed or placed in any part of the body, consult a doctor immediately.