0 3 baby A03-TR0602-WW Torsten Mini Cot User Manual
- June 5, 2024
- 0 3 baby
Table of Contents
0 3 baby A03-TR0602-WW Torsten Mini Cot
IMPORTANT INSTRUCTION
WARNING
- Do not leave anything in the cot or place the cot dose to another product, which could provide a foothold for the child to dumb out or present a danger of suffocation or strangulation.
- Be aware of the risk of open fires and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the cot.
- The cot should not be used if any parts are damaged or lost and use only spare parts approved by the manufacturer.
- Do not use more than one mattress in the cot
- Ascot is ready for use, only when the locking mechanisms are engaged and to check carefully that they are fully engaged.
PARTS LIST
3 mattress base positions
- Highest (0-3 months old) / (£EITA)/ CHE3tA)
- Set at the highest position for easy caring of baby
- Middle(3-6 months old)/ h (31A E6MA/ #(3t AE6TA)
- Change to middle position when baby starts to roll over
- Lowest(6 months old and up) / E (6ACLE) E(6A
- Change to lowest position when baby starts to stand.
- Change to lowest position when baby starts to stand.
Attach legs to head / end board
Fix the two legs to the head / end boards using wrench E and screws B.
Fixing bedsides and head/end board
Do not tighten screws A at this moment.
Fixing cot base and wheels
Drop cot base onto angle brackets and screwC, secure further of the cot base
with the screw C located at the bottom side by using wrench E. Securely
tighten screws C finally.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>