Sailstar Vanity Light Fixtures User Manual
- June 16, 2024
- Sailstar
Table of Contents
**Sailstar Vanity Light Fixtures User Manual
**
Product Information
- Type: 4-Light Bathroom Light
- Voltage: AC 120V 60HZ
- Wattage: 60W Maximum
- Base: Standard E26 socket Bulbs are not included
Package Included
-
1xVanity Light Fixture
-
4xGlass Lampshades
-
4xSocket Rings
-
1xMounting Plate
-
2xScrew Nuts
-
3xWire Nuts
-
2xScrews
Tools Recommended **Please consult a qualified electrician if you are not
sure how to install.
Installation Method
Disconnect power before Installation.
-
Separate the mounting plate from the fixture by unscrewing the screw nuts.
-
Tighten the mounting plate to the junction box by screwing the included screws.
-
Connect the wires correctly and secure them with electrical tape and wire nuts. (White to white and black to black, with the copper wire attaching to the mounting plate)
-
Install the light fixture by locking the screw nuts.
-
Install the glass lampshade in the lamp 5 j 5 holder and fix it by rotating the socket KITCHEN B ring. Then screw the light bulb into the E26 socket. (Bulbs are not included)
-
Connect the power and turn on the light when installation finished.
Safety Warnings
- Please disconnect the power before installation.
- Please install in strict accordance with the instructions.
- Please don’t use a power supply that exceeds the rated voltage range.
- Please contact us for replacement if there are any quality issues during warranty.
How to contact us on Amazon?
Find the product pages and clicks sold by “Sister,” and ask a question. See
the below screenshot. Our bathroom lights provide two years replacement
promised.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>