Sailstar B0C3Z47KRM Desk Lamp with Wireless Charger User Manual

Sailstar B0C3Z47KRM Desk Lamp with Wireless Charger User Manual

Please read the user manual carefully to avoid any accidents due to incorrect operations before using this lamp.

1. Product Introduction

This integrated wireless charger is included with this LED desk lamp (support IOW Max). Three different color temperatures and brightness levels can be freely changed. The memory function enables it to automatically switch back the brightness and color mode after being turned off the last time. Its base’s small footprint and flexible gooseneck make it both portable which emits sufficient light without blue light or visual strobes to keep your eyes from any UV rays.

2. Installation Instruction

3. Product Specification

The above data are measured by laboratory, the actual use will be slightly different depending on the specific circumstances.

4. Product Feature

5. Hazardous Substances List

This product complies with the Measures for the Administration of the Restricted Use of the Hazardous Substances Contained in Electrical and Electronic Products.

You can use this product with assurance during the period of usage since it won’t have any difficulties with leakage or exudation of harmful substances that could affect customers’ health.

6. Safety Warning

1. Alerting people to potential dangers, such as breakage, falls, electric shock and fire, etc. Please follow the instructions for proper installation and usage. You must not alter the lamp or swap out the parts and accessories without permission.
2. Never use a power supply that runs above its recommended voltage range. Long-term use above the permitted voltage range could harm the lamp.
3. It is forbidden to set up the lamp in an unstable location, such as with a slope greater than 60.
4. Lamps are not permitted to be used in parallel with a dimmer or to be connected in series with other electrical devices.
5. Whenever inspecting or maintaining lamps, seek advice from electrical experts, non-professional maintenance is dangerous.
6. Turn off the power immediately and get in touch with the retailer if a strange occurrence happens with the lamp. (During maintenance, the product model should be provided; refer to the model on the lamp body.
7. To avoid danger, the manufacturer, service representative or a qualified individual should replace the cable if the external flexible cord of the lamp is damaged.

• Take note: Users are not permitted to change the light source in this lamp. It must be changed by a professional individual.

7. Product Warranty

Warning: To avoid electric shock, the power supply must be turned off prior to performing maintenance and repairs on the lamp.

To use this product safely and effectively, please clean and inspect it on a regular basis (every six months). To clean the lamp, turn off the power first, then use a soft dry cloth dipped in soapy water to wipe it down. Do not use any other cleaning agents as they could damage or discolor the lamp.

The operation of this device is subject to the following two restrictions:
(I) this device may not generate harmful interference; and (2) this device shall accept any interference received, including interference that may result in undesired operation.

NOTE: According to Part 15 of the FCC Rules, this equipment has undergone testing and has been determined to be in compliance with the restrictions for a Class B digital device. These restrictions are made to offer a residential installation reasonable protection against damaging interference.

There is no guarantee that interference will not occur in a specific installation, but if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference.

• Rotate or move the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Plug the equipment into an outlet on a different circuit than the one to which the receiver is connected.
• For assistance, contact the dealer or a professional technician.

8. After-sale service

Under the condition of proper installation, operation, and compliance with the requirements of this manual, our company will provide users With replacement services if the product fails due to a functional fault during the warranty period, such as being completely unable to light up or charge. Please contact us if you have any further questions about the products.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>