nVent CADDY CAT32HPDFM2 Cat HP J-Hook Tree Flange Mount Owner’s Manual
- June 16, 2024
- nVent Caddy
Table of Contents
nVent CADDY CAT32HPDFM2 Cat HP J-Hook Tree Flange Mount Owner’s Manual
FEATURES
- Easy installation to beam flanges
- Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic
- Ready to use out of the box, saving installation time and labor
- Requires no screws, rivets or special tools for assembly
- Single- or double-sided tree configurations provide multiple J-Hooks with one structural attachment
- Provides superior fill capacity and load rating over most other non-continuous cable support alternatives
- Complies with EN 50174-2
- Meets ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569
PRODUCT ATTRIBUTES
- Material: Steel
- Finish: Pregalvanized
- Type: Double Sided
- Diameter: 2″
- Tiers: 2
- Flange Thickness: 13/16″ Max
- Height: 10 1/4″
- Width: 5 13/16
- A: 1 1/8″
- B: 2″
- Torque: 5 ft lb
- Static Load: 240 lb
ADDITIONAL PRODUCT DETAILS
Static loads represent maximum load limit of J-Hook tree. Static load limit of each J-Hook is 60 lb (270 N).
Setscrew must be tightened and torqued onto the sloped side of the I-beam.
Non-continuous supports may not exceed spacing of 5′ (1.5 m) per TIA 569-C.9.7 and EN 50174-2
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
