MOUNTUP MU0017 TV Wall Mount Installation Guide

MU0017 TV Wall Mount

Product Information

Specifications:

• Product Dimensions: 200mm /7.87
• Maximum TV Size: 800mm/32
• Minimum TV Size: 150mm/6
• Maximum Load Capacity: 120 lbs (54.5 kg)

Product Usage Instructions

Installation:

Safety Caution: Please read this instruction carefully before
installation. If you do not understand these instructions or have
doubts about the safety of the installation, assembly, or use of
this product, please contact us.

This product is designed for use in wood stud or solid concrete
wall. DO NOT install into drywall alone. The wall must be capable
of supporting five times the weight of the TV and mount combined.
Incorrect installation may result in product damage, property
damage, or body injury.

We shall bear no responsibility for any damage or injury
resulting from incorrect installation, incorrect assembly, or
misuse.

Must Check Before Getting Started:

Before starting assembly, verify all parts are included and
undamaged. If any parts are missing or damaged, do not return the
damaged item to your dealer; please contact our customer service
team. Never use damaged parts!

Supplied Parts and Hardware:

• Wall Plate H x2
• Wall Plate Cover K x1
• J x1
• I x1
• TV Brackets
• Allen Key L x1
• Lag Bolt ST8x65mm A x6
• Washer 8mm B x6
• Bolt M6x12mm D x2
• Washer 6mm E x2
• Nut M6 F x2
• Wrench S10mm G x1

Verify Your Wall Construction:

Make sure your wall is capable of supporting the weight of the
TV and mount combined. If you are unsure, consult a professional or
contact our customer service team for assistance.

FAQ

Q: What is the maximum TV size this product can support?

A: The maximum TV size this product can support is 800mm/32.

Q: What is the minimum TV size this product can support?

A: The minimum TV size this product can support is 150mm/6.

Q: What is the maximum load capacity of this product?

A: The maximum load capacity of this product is 120 lbs (54.5
kg).

Q: Can I install this product on a drywall?

A: No, this product is not designed to be installed on drywall
alone. It is designed for use in wood stud or solid concrete
walls.

INSTALLATION INSTRUCTION
YZ2235_US1.2

If you have any questions, please feel free to contact Customer Service via Amazon before returning.
Safety Caution
Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.
This product is designed for use in wood stud or solid concrete wall.
– DO NOT install into drywall alone.
The wall must be capable of supporting five times the weight of the TV and mount combined. Incorrect installation may result in product damage / property damage or body injury.
We shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; please contact our customer service team. Never use damaged parts!
Must Check Before Getting Started

W H

Minimum VESA Pattern (W × H): 150mm × 100mm / 6 in × 4 in
Maximum VESA Pattern (W × H): 800mm × 400mm / 32 in × 16 in

Product Dimensions

200mm /7.87″

MAX: 800mm/32″ MIN:150mm/6″
R4.3mm/0.173″ 0mm/1.18″

8.5mm/0.33″ 30mm/1.18″

147.5mm /5.81″

88mm/3.46″
203mm/8″ 406mm/16″ 610mm/24″ 813mm/32″ 860mm/33.9″

82mm/3.23″

MAX: 400mm/16″
MIN: 100mm/4″

424mm /16.69″

+10°
Tilt
-15°

Supplied Parts and Hardware

Wall Plate H x2

Wall Plate Cover K x1

J x1

I x1

TV Brackets

Allen Key L x1

Wall

Product

Lag Bolt ST8x65mm
A x6

Washer 8mm
B x6

Bolt M6x12mm
D x2

Washer 6mm
E x2

Nut M6
F x2

wrench S10mm
G x1

Load Capacity
MAX: 120 lbs (54.5 kg)

Verify Your Wall Construction

<5/8″(16mm)

Min.4″(102mm)

Min.2″(51mm) Max.32″(813mm)

Perfect!

Wall with wood studs

CAUTION: Avoid potential personal injuries and property damage! Drywall covering the wall must not exceed 5/8 in. (16 mm). Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm).

Min. 8″ (203mm)
Solid concrete wall

Perfect!

CAUTION: Avoid potential personal injuries and property damage! Mount the wall plate assembly directly onto the concrete surface (no surface covering).

CAUTION: DO NOT install into drywall alone.

TV

Philips Screws Philips Screws Philips Screws

M4 x 12mm

M6 x 15mm

M8 x 25mm

M4 x 30mm

M6 x 30mm

M8 x 45mm

Spacers H10mm

Washers 6mm M4-5-6

Spacers H5mm

×4 ×4

×4 ×4

×4 ×4

×8

×4

×8

MA

MB

MC

MD

ME

MF

Bubble Level T1 ×1

Velcro Cable Ties T2 ×3

NOTE: Not all parts and hardware included will be used.
Extra Tools You Need (Not Supplied)

For Wood Studs

For Concrete Wall

7/32″ (5.5mm)

Stud Awl Wood

Finder

Drill Bit

3/8″ (10mm)
Masonry Hammer Drill Bit

2M
Band Tape

Pencil

Electrodrill

1/2″ (13mm)
Socket Screwdriver Wrench

1 Attach Brackets to TV
1-1 Select Correct TV Screw Diameter
M6 M8 M4

1-2 Select Correct TV Screw Length

Screw Bracket Spacer

Too Short Too Long Correct

Correct

CAUTION: Too short will not hold your TV. Too long will damage your TV.

Which Situation Needs Spacers?
If the screw is too long or the surface is uneven, please choose the appropriate screws and spacers for your TV.

For more spacing between bracket and TV

For raised back TV

For counterbore of TV

To avoid the blocked input

1-3
Do not tighten the screws excessively or tighten them by using the Electrodrill, or your TV might be damaged.
May be needed

TOP OF TV

Not for M8 Screws

Arrow Up I
J

2 Assemble Wall Plate
Horizontal
2-1 Assemble two Wall Plates (H) with Bolts (D), Washers (E) and Nuts (F). Keep the upside of the two Wall Plates (H) horizontal, and then use Wrench (G) to fasten the Nuts (F).
G
2-2 Buckle the Wall Plate Cover (K) on the Wall Plate (H).
1. Hang K
2. Push
203mm / 8″ 406mm / 16″ 610mm / 24″ 813mm / 32″

3-A Attach Wall Plate to Wall

OPTION A: Wood Stud Installation

A-1

T1

Min. 2″ (51mm)

WaUlnl Pitlate

Min. 4″ (102mm)

Center line

Wall in front of the wood studs < 16mm (5/8″)

Locate your studs. Verify and mark
the center of the stud by finding the stud edges using awl and stud finder.

Line up the holes with your stud center line. Level the wall plate and mark the pilot hole locations.

3-B Attach Wall Plate to Wall

OPTION B: Solid Concrete Wall Installation

B-1
Min. 8″ (203mm)

T1
Wall Plate Unit
Level the wall plate and mark the pilot hole locations. Note: 4 bolts for the upside & 2 for downside.

A-2

B-2

4 Hang and Secure TV to Wall Plate
4-1
Before hanging TV, please conduct “wall plate installation integrity test” first.
120 LBS (54.5 KG)
4-2
Hang and secure TV assembly onto the wall plate.
TV must be hung up by two person

5 Adjustments
5-1 Tilt Adjustment

Loosen the 2 tilting bolts, pull the brackets to your desired angle, then fasten 2 tilting bolts.

-15° +10°

Tighten

Loosen

Option
To keep TV in vertical position, please use two M4 screws (MA) to insert the holes on two brackets respectively.

Ø7/32 in Ø5.5 mm 3/8in 10 mm

DANGER

Wood Stud

Bit
2 ¾ in (70mm)
Deep

Drill pilot holes using a 7/32 in (5.5mm) diameter drill bit.
IMPORTANT: Be sure to drill into the center of the stud.

A-3

DANGER

Bit

Concrete Wall

2 ¾ in (70mm)
Deep

Drill pilot holes using a 3/8 in (10mm) diameter drill bit.
IMPORTANT: Never drill into the mortar between blocks.

B-3

5-2 Leveling Adjustment

CAUTION: Avoid potential personal injury or property damage! Always make sure your TV brackets are in the locked position so the TV is securely attached to the wall plate assembly.
If necessary
Take down the TV from the Mount

Unlevel

Turn the screw on the lower bracket clockwise until the TV is level. (Maximum leveling adjustment 15mm)

Lower Side

Clockwise
L

AB

CAUTION: Do not use in drywall or wood stud!

Install wall plate using lag bolts A and Washers B with Socket Wrench, NO Electrodrill.
CAUTION: To avoid potential personal injury or property damage: All 4 lag bolts A MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.

AB

Concrete Wall Anchor (NOT INCLUED)

10×61mm

Contact us to have these additional pieces shipped directly to you.

Use the hammer to knock anchors (not included) into the concrete wall. Be sure the anchors are seated flush with the concrete surface.
Install wall plate using lag bolts A and Washers B , and anchors (not included) with Socket Wrench, NO Electrodrill.
CAUTION: To avoid potential personal injury or property damage: All 6 lag bolts A MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.

To prevent breaking the locking latch: always pull and hold the release straps down while pulling the TV away from the wall.

TV must be taken down by two person

T1 Level

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>