MOUNTUP MU0022 Single Monitor Desk Mount Instruction Manual
- June 16, 2024
- MOUNTUP
Table of Contents
MOUNTUP MU0022 Single Monitor Desk Mount
Product Information
Specifications
- Model: MA05N-12-US3.0
- Compatibility: 75×75, 100×100 VESA patterns
- Weight Capacity: 1.5~8kg (3.3~17.6lbs)
Product Usage Instructions
Step 1: Choose a mounting option
Option A: Clamp Installation
- Mount clamp base support (C) to monitor stand (A) using bolts (J) and tighten with the 4mm Allen Key (M).
- Attach clamp (D) to clamp base support (C) using bolts (J) and the 4mm Allen Key (M).
- Adjust the clamp width to fit the desk and secure the stand to the desktop by tightening the clamp (D) or using the Allen key (N).
- Attach the base support cover (E) to the clamp base support (C).
Option B: Grommet Base Installation
- Place the long screw (F) through the center of the base support (G).
- Mount the grommet base to the monitor stand (A) bottom using bolts (J) and tighten with the 4mm Allen Key (M).
- Apply pads (L) to the monitor stand (A) bottom to avoid desk scratches.
- Run the long screw (F) through the grommet hole on the desktop.
- Attach the support plate (H) and tighten the wingnut (K).
Note : Desk thickness should be between 0.39-3.34 inches for both mounting options.
Step 2: Attach the monitors to the arm
Option A: Flat Back Monitor
- Attach the VESA plate (B) to the back of the monitor.
- Secure the VESA plate (B) using the 6mm Allen Key (N) to tighten screws (M-A).
- If the M-A screw is too long, use a H5mm spacer (M-C) to fix it.
Option B: Curved Back Monitor
- Attach the VESA plate (B) to the back of the monitor.
- Secure the VESA plate (B) using the 6mm Allen Key (N) to tighten screws (M-B) along with spacers (M-C).
FAQ:
- Q: What is the weight capacity of this desk mount?
- A : The weight capacity is 1.5~8kg (3.3~17.6 lbs).
- Q: Can I use this desk mount for monitors with VESA patterns other than 75×75 and 100×100?
- A: No, this desk mount is only compatible with monitors that have 75×75 or 100×100 VESA patterns.
- Q: Can I move the stand outside of the desk?
- A: No, for safety reasons, the stand should not be moved outside of the desk.
WARNING
If you have any confusion or are not quite sure about the installation, please
do not hesitate to ask for our help.
Before assembly, please check and make sure all necessary accessories are
included and undamaged. Improper installation, such as using the product for
monitors over its load capacity or for any purpose not explicitly specified,
may cause damage or serious injury. We would not be liable for any damage or
injury caused by improper mounting or inappropriate use. The kit contains
small items that could be choking hazards if swallowed. Please keep them OUT
OF THE REACH OF CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
ASSEMBLY INSTRUCTION
ASSEMBLY STEPS
Warm Tips You could also refer to the Video Guide about installation on our product page.
STEP 1: Choose a mounting option
OPTION A: Clamp Installation
Mount clamp base support (C) to monitor stand (A) with Bolts (J). Bolts could
be tightened by the 4mm Allen Key (M), then Apply pads (L) to the monitor
stand (A) bottom to avoid desk scratches.
Attach Clamp (D) to clamp base support (C) with Bolts (J) and 4mm Allen Key (M).
Adjust the Clamp width to fit with the desk. Secure stand to the desktop by tightening Clamp (D) or by Allen key (N). Attach base support cover (E) to clamp base support (C).
OPTION B: Grommet Base Installation
Place long screw (F) through the center of base support (G). Mount the grommet base to monitor stand (A) Bottom with Bolts (J) and tighten by 4mm Allen key (M). Apply pads (L) to the monitor stand (A) bottom to avoid desk scratches.
Run a long screw (F) through the grommet hole on the desktop. Attach support plate (H) and wingnut (K). The last step, tighten Wingnut (K).
STEP 2: Attach the monitors to the arm
OPTION A: Flat Back Monitor
Attach the VESA plate (B) to the back of the monitor and secure it by using a
6mm Allen Key (N) to tighten screws (M-A). Do not tighten the screws
excessively or your monitor might be damaged.
NOTE If the M-A screw is a little long, please use a H5mm spacer(M-C) to
fix it.
OPTION B: Curved Back Monitor
Attach the VESA plate (B) to the back of the monitor and secure it by using a
6mm Allen Key (N) to tighten screws (M-B) along with spacers (M-C). Do not
tighten the screws excessively or your monitor might be damaged.
Do not tighten the screws excessively or your monitor might be damaged.
STEP 3: Hang Monitor
Slide the monitor onto the head of the swivel arm, and install the security screw (I). Make sure the security screw is installed before you rotate the monitor.
Guideline to adjust monitor tilting angle
STEP 4: Adjust the tension
For proper functioning of this mount, depending on the different weights of the monitor you might need to adjust tension in the upper arm using a 6mm Allen key (N).
NOTE1:
If the bolt is covered over, please hold the upper arm and press it down to
maintain a horizontal position, and then you can see the adjustment screw at
the joint. Be sure to keep the arm in a horizontal position during adjustment
.
NOTE2:
As for how many circles the screw should be turned, the table below is for
reference.
Monitor Weight| 4.4lbs
(2kg)
| 6.6lbs
(3kg)
| 8.8lbs
(4kg)
| 11lbs
(5kg)
| 13.2lbs
(6kg)
| 15.4lbs
(7kg)
| 17.6lbs
(8kg)
---|---|---|---|---|---|---|---
Circles (AT LEAST)| min| 3| 4| 6| 8|
10| 12
STEP 5: Cable Management
Remove Cable Cover
For both the bottom and upper portion of the arm, just slide the cable cover
up and away from the arm, do not need to take much effort to pull the ends of
the cable cover away from the arm.
STEP 5: (Continued)
Attach Cable Cover
On the bottom portion of the arm, insert the cable and slide the cable cover
down; On the upper portion of the arm, insert the cable and press the tabs on
the inside of the cable cover slightly inward and slide down to reattach the
cable cover
Adjust as Desired
Allen key (M, N) can be stored in Base Support Cover(E) for next time using.
Note:
When tilted, if the monitor sags or does not stay, please fasten the tilting
bolt on the mount until the monitor can be held at any angle as needed.
Note: To ensure stability, the tightness of the rotating axis has been preset, so it would be kind of difficult to rotate the VESA plate. Suggestion: Please attach the monitor first, then hold the two sides of it with both hands and rotate vigorously. If that doesn’t work out, please do not hesitate to ask for our help.
Product Dimensions
CAUTION AND MAINTENANCE:
- Never allow children to climb, stand, hang, or play on any part of the monitor or stand.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>