Dantherm CDT 40-40S Condensation Dehumidifier User Manual
- June 16, 2024
- Dantherm
Table of Contents
Dantherm CDT 40-40S Condensation Dehumidifier
Product Information: CDT 30-40-60-90 MKIII
Specifications:
- Model: CDT 30-40-60-90 MKIII
- Service manual Rev. 1.1
- Refrigerant: Flammable
- Control: Remote control data port
- Functions: Compressor, Condenser, Ventilator, Dry filter
Product Usage Instructions
Section 1: Unpacking (CDT 30-40-60)
Follow these steps to unpack the CDT 30-40-60:
- Loosen the adjustable wheels, lift the handle to the desired height, and tighten the wheels.
- Remove the protective sheet from the control panel.
Section 2: Unpacking (CDT 90)
Follow these steps to unpack the CDT 90:
- Remove the packaging box from the dehumidifier.
- Connect the supplied hose connector.
- Remove the protective sheet from the control panel.
Section 3: Transporting or Moving the Dehumidifier
When transporting or moving the dehumidifier, follow these guidelines:
- Always use two people for lifting.
- Use stairs if necessary.
Section 4: Storage (CDT 30-40-60)
If you want to store the CDT 30-40-60 dehumidifiers, you can stack 2 units
together.
Note: Do not stack the CDT 90.
Section 5: Functions and Operating States
The following functions and operating states are available:
- ON: Continuous operation
- OFF: Shutdown
- HYG OFF HYG SET RHxxx%: Flashes for 5 seconds
Section 6: Hours Counter
The hours counter displays the total hours of operation. It can be adjusted
for maintenance intervals.
Section 7: Error Messages
The following error messages may occur:
- PUMP FAIL: Pump failure (accessory)
- HIGH TEMP: Ambient temperature outside normal range
- SENSOR FAIL: Internal sensor failure (use +/- keys to view possible errors)
- LP STOP: Low pressure stop, requires authorized maintenance
FAQ
Q: Can I hang the dehumidifier on a wall?
A: Yes, it is possible to hang the dehumidifier on a wall using a wall
bracket. The wall brackets are compatible with all CDT models.
Q: What refrigerant does the CDT 30-40-60-90 MKIII use?
A: The CDT 30-40-60-90 MKIII uses a flammable refrigerant.