MEAN WELL XLG-150 Series 150W Constant Power Mode LED Driver Owner’s Manual

MEAN WELL XLG-150 Series 150W Constant Power Mode LED Driver

Specifications

Features

• Constant Power Mode LED Driver
• 150W Rated Power
• Adjustable Current Range (6.5-12.5A for A-Type only)
• Wide Input Voltage Range (100-305VAC, 142-431VDC)
• High Power Factor (PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC at full load)
• Low Total Harmonic Distortion (<10% at load50%/115VAC,230VAC; load75%/277VAC)
• Efficiency: 91.5% (XLG-150 -12-), 93% (XLG-150 -24-)

Dimensions
1806335.5mm (LWH)

Packaging
0.8Kg; 16pcs / 13.4Kg / 0.69CUFT

Note
To fulfill the requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without being permanently connected to the mains.

150W Constant Power Mode LED Driver

XLG-150 series

Features

• Wide input range 100~305V AC( Class I)
• Full power output at 70~100% Constant power mode operation
• Metal case with IP67, suitable for outdoor application
• Surge protection with 6KV/4KV (10KV/6KV optional)
• 3 in 1 dimming function (Dim to off and Isolation design)
• India (EESL) version with Input Over Voltage Protection can survive input voltage stress of 440Vac for 48 hours
• Protection functions: OVP/SCP/OCP/OTP
• Compliance to EN60335-1 household application
• Life time >50,000 hrs. and 5 years warranty

Applications

• Skyscraper lighting
• Street lighting
• Floodlight Lighting
• Stage lighting
• Horticulture lighting
• Bay lighting
• DMX power supply
• Type HL for use in class I, Division 2
• Household devices
• Retail and refrigerated display

GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

VIVV wear ella XLG-150 series is a 150W LED AC/DC driver featuring the constant power mode. XLG-150 operates from 100~305VAC and offers models with different rated current ranging between 700mA and 12500mA. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40°C~+90°C case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative environment- adaptive capability allows this series to reliably light on the LEDs for all kinds of application environments in almost any spots that may install LED luminaires in the world. XLG-150 series comply with the latest version of IEC61347/GB19510.1 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both user and luminaire system during installation.

Model Encodina

SPECIFICATION

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25C of ambient temperature.
2. Please refer to “DRIVING METHODS OF LED MODULE”.
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. Input over voltage only for XLG-150 | series ,and I series without UL/CSA certificate.
8. . The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft).
10. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com
11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly t© point (or TMP, per DLC), is about 75°C or less.
12.  Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.
13. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 1
14. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains. Disson contant MCAN WEI I caine ennencaniatun for Antoile

SPECIFICATION

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25°C of ambient temperature.
2. Please refer to “DRIVING METHODS OF LED MODULE”.
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. Input over voltage only for XLG-150 I series ,and I series without UL/CSA certificate.
8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000(6500ft).
10. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com
11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tC point (or TMP, per DLC), is about 75°C or less.
12. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.
13. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
14. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains.
15. If you need the NOM (Mexico) certificate, Please contact MEAN WELL sales representative for details. * Product Liability Disclaimer : For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:XLG-150-SPEC 2023-08-25

BLOCK DIAGRAM

DRIVING METHODS OF LED MODULE

Recommend Performance Region

Recommend Performance Region

This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

Typical output current normalized by rated current (%)

DIMMING OPERATION

3 in 1 dimming function (for AB-Type)

• Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance.
• Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
• Dimming source current from power supply: 100μA (typ.)

1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.

OUTPUT LOAD vs TEMPERATURE

If XLG-150 operates in Constant Current mode with the rated current the maximum workable Ta is 55℃ (Typ. 230VAC) or 40℃(Typ.100VAC) Below 110VAC@ -30℃may retry to 2nd setup

STATIC CHARACTERISTIC

TOTAL HARMONIC DISTORTION (THD)

POWER FACTOR (PF) CHARACTERISTIC

Tcase at 75℃

EFFICIENCY vs LOAD

XLG-150 series possess superior working efficiency that up to 93% can be reached in field applications. XLG-150-L Model, Tcase at 75℃

LIFE TIME

MECHANICAL SPECIFICATION

A-Type

AB-Type

INSTALLATION MANUAL

Please refer to : http://www.meanwell.com/manual.html

Downloaded from Arrow.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>