RELIABILT 07-2976 Black Steel Mount Mailbox Post User Guide
- June 16, 2024
- RELIABILT
Table of Contents
RELIABILT 07-2976 Black Steel Mount Mailbox Post User Guide
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time : 20-30 minutes.
TOOLS REQUIRED (NOT INCLUDED)
-
Level
-
Phillips Screwdriver
-
Wrench
-
Hammer
PACKAGE CONTENT
-
Top Post
-
Bottom Post
-
Support Arm
-
Mounting Plate
-
Mounting Brackets
-
Cap
-
Pounding Block
-
1/4-20×3/8”
-
1/4-20 Hex Nuts
-
1/4-20×1-3/4”
-
1/4 Flat Washer
-
10-24×3/4”
-
10-24 Hex Nuts
-
M6
-
M6
INSTALLATION OVERVIEW
-
On the bottom post place a mark 18” away from the pointed end. Use the pounding block and a hammer to drive the bottom post into the ground stopping at the 18” mark. While driving the bottom post into the ground, make sure it remains level. For extremely hard soil, an additional wood pounding block might be necessary to ensure post is not damaged during installation.
-
Slide the top post onto the bottom post. Use the pounding block and a hammer to secure the top post to the bottom post. While securing the top post to the bottom post, make sure the post assembly remains level. Attach the top post assembly to the bottom post using 2 pc #M6 Screw.
-
Attach the mounting plate to the support arm using 2 pcs(#1/4-20×3/8”） Fije la placa de montaje al brazo de soporte con 2 piezas (#1/4-20×3/8
-
Option A: Side Mount Standard Size Mailbox
Option B: Side Mount Large Size Mailbox
Option C : Bottom Mount Mailbox
Position the mounting brackets as shown. Attach the brackets to the mounting plate using 2 pcs （#10-24×3/4”）screws and 2pcs （#10-24）hex nuts. -
Slide the support arm onto the top post.
-
Attach the support arm to the top post using 1 pcs （#1/4-20）hex nut, 1 pcs （#1/4-20×1-3/4”） screw and 1 pcs （#1/4-20×1-3/4”） screw. After installation, the support arm assembly may need to be adjusted. ( Do not over tighten)
-
Insert the cap into the top post).
RELIABILT and logo design are trademarks or registered trademarks of LF, LLC.
All rights reserved.
Thank you for purchasing this RELIABILTproduct. We’ve created these easy-to- follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
