RELIABILT 7222520WH 25-Inch 1-Way Steel White Sidewall-Ceiling Grille Instruction Manual

RELIABILT 7222520WH 25-Inch 1-Way Steel White Sidewall-Ceiling Grille

FLOOR REGISTER

1. Measure your duct opening size in the floor (width x height).
2. Match the size as shown on the packaging.
3. Select a correct floor register based on size.
4. Insert the floor register into the opening.

TOE SPASE GRILLE

1. Measure your duct opening size in the floor (width x height).
2. Match the size as shown on the packaging.
3. Select a correct toe space grille based on size.
4. Align with opening and fix the grille to the floor with the screws provided.

RV FLOOR REDISTER

1. Measure your duct opening size in the floor (width x height).
2. Match the size as shown on the packaging.
3. Select a correct floor register based on size.
4. Insert the floor register into the opening and fix the register to the flooring with screws provided.

BASEBOARD DIFFUSER

1. Measure your duct opening width in the baseboard.
2. Match the size shown on the packaging.
3. Select a correct diffuser: 15 in (actual duct opening width of 12 in), 18 in (actual duct opening width of 15 in), 24 in (actual duct open width 21 in).
4. Place your hand inside the diffuser from the bottom and remove faceplate apart from the baseboard difuser base.
5. Fix and install to the mounting surface with the appropriate Screws (sold separately).
6. Position bottom holes on faceplate onto dimples on base unit and pivot faceplate up and snap into the base unit.

BASEBOARD REGISTER AND GRILLE

1. Measure your duct opening size in the baseboard wall (width x height).
2. Match the size as shown on the packaging.
3. Select a correct register or grille based on size.
4. Align with the opening and fix the register or grille to the baseboard wall with the screws provided.

SIDEWALL REGISTER AND GRILLE

1. Measure your duct opening siZe in the wall (width x height).
2. Match the size as shown on the packaging.
3. Select a correct sidewall register based on size.
4. Insert the sidewall register into the opening and fix the register to the wall with the screws provided.

ROUND DIFFUSER

1. Measure your duct opening diameter in the wall.
2. Match the size as shown on the packaging.
3. Select a correct round diffuser or damper
4. Align with opening and fix the diffuser or damper to the wall with the screws provided.

SIDEWALL DIFFUSER

1. Measure your duct opening size in the wall or ceiling (width x height).
2. Match the size as shown on the packaging.
3. Select a correct diffuser based on size.
4. Insert the diffuser into the opening and fix the diffuser to the wall or ceiling with the Screws provided.

RETURN GRILLE

1. Measure your duct opening size in the wall (width x height).
2. Match the size as shown on the packaging.
3. Select a corect return grille based on size.
4. Align with opening and fix the grille to the wall with the screws provided.

RETURN FILTER GRILLE

1. Measure your duct opening size in the wall (width x height).
2. Match the size as shown on the packaging.
3. Select a correct return grille based on size.
4. Push the plastic switch handle and remove the faceplate away from the frame;
5. Insert the frame into the opening and fix the frame to the wall with Screws provided:
6. Install the faceplate into the frame and push the plastic switch handle to lock it

PRESS IN RETURN GRILLE

1. Measure your duct opening size in the wall (Width x height).
2. Match the size as shown on the packaging.
3. Select a correct return grille based on size.
4. Open the faceplate by simply pressing the two sides on the top of the faceplate.
5. Insert the frame into the opening and fix the frame to the wall with screws provided.
6. Simply press the faceplate back to the frame to lock it.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>