RELIABILT 5144304 Solar LED Address Sign Installation Guide
- June 3, 2024
- RELIABILT
Table of Contents
RELIABILT 5144304 Solar LED Address Sign
INSTALLATION AND HOW TO USE
- Locate the best location for your DIY Solar LED Address Sign. For best results, it is recommended that the sign is placed where it receives adequate sunlight throughout the day.
- The light turns ON and Off automatically at sunset and sunrise.
- Offering high visibility at night, this solar LED sign helps emergency workers, couriers, and visitors to quickly find your house.
- This Solar Powered LED Address Sign is equipped with a USB charging port if experiencing an extended period without direct sunlight.
SETTING UP AND INITIATION
Package Included:
- 1 – Address sign plaque
- 4 – Sets of vinyl numbers 0-9
- 1 – Set of vinyl letters A-Z
- 3 – Guide templates
- 2 – Screws& anchors
- 1 – Install guide card
- 1 – Charging cable
How To Install
-
Clean white board.
-
Select the alignment card that matches your need.
-
Place the alignment card on the white board.
-
Align characters starting at the bottom and paste upward.
-
Once you have located the desired placement for the sign, use the Install Guide Card to mark the correct position for two screws. For best results, install sign where it can receive direct sunlight.
-
Drill two holes using a 1/4″ drill bit.
-
Tap the anchor into the hole you drilled.
-
Drive the screw into the anchor.
Don’t drive the screw all the way in. Leave a small distance between the screw head and the surface of the wall for hanging. -
Press switch to Auto.
-
Install sign where it gets direct sunlight.
-
Hang sign on the screws.
-
If experiencing an extended period without direct sunlight, you can charge the sign using the type-c charging port. After charging is completed, insert the soft cover to prevent exposure to moisture or dirt and debris.
SECURITY INFORMATION
CAUTIONS: The packing contains small parts that could be swallowed by
children.
Keep the packaging material away from children and pets (danger of
suffocation).
- This solar powered address sign is not a toy.
- For safety reasons it is not allowed to rebuild and/or to change the solar address sign luminaire.
- Clean the solar module regularly with a damp towel.
- Do not use any type of solvent or detergent for cleaning.
- Please pay attention to an appropriate start-up. Never attempt to repair defective parts yourself. Repairs must be carried out only by qualified specialist.
- Charging cable included, close the soft cover tightly after charging to prevent the infiltration of rainwater.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>