KOHLER K-35028 Seagrove by Studio McGee 60 Bathroom Vanity Cabinet User Guide
- June 16, 2024
- Kohler
Table of Contents
Seagrove™ by Studio McGee
60″ bathroom vanity cabinet
with sinks and quartz top
**K-35028
**
Features
- Designed in collaboration with Studio McGee
- Set includes cabinet, precut quartz vanity top, backsplash, sinks, tall legs and shelf, cabinet hardware
- Full-extension 17″ (432 mm) drawers with soft-close undermount slides
- Three-way adjustable slow-close door hinges for easy cabinet access
- 20-7/16″ (519 mm) cabinet interior provides ample storage space
- Finish-matched cabinet interior offers generous clearance for plumbing
- Two internal electrical outlets and two USB ports for powering small devices
- Two stainless steel storage holders for hairdryers, curling irons, or accessories
- Vanity top has 8″ (203 mm) widespread faucet holes; requires deck-mount faucets (sold separately)
- Vibrant® Polished Nickel hardware included on Ferrous Grey vanities and Vibrant Brushed Modern Brass hardware on Light Clay vanities. Additional hardware finishes available (sold separately)
Material
- Quartz vanity top adds beauty and long-lasting durability
- Vitreous china sinks
- Solid and composite wood
Installation
- Easy installation ± no special tools required
- Sinks preinstalled on vanity top to simplify installation
Optional Products/Accessories
K-29980 Cabinet knob
Codes/Standards
ASME A112.19.2/CSA B45.1
KOHLER® One-Year Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
| Color | Code | Description |
|---|---|---|
| DWG | Ferrous Grey | |
| LWG | Light Clay |
Required Electrical Service
One circuit required.
Outlet: 120 V, 12 A, 60 Hz
Technical Information
All product dimensions are nominal.
Electrical component
rating: Outlet: 120 V, 12 A, 60 Hz
Notes
Install this product according to the installation instructions.
Select the type of fastener based upon the wall material. Two 250 lb (113.4
kg) minimum load bearing fasteners are recommended with a lag bolt of length
to clear obstacles in the wall and 5/16″ washers. Calculate the proper lag
bolt length by adding the 1-1/2″ (38 mm) backing material, plus the wallboard
thickness, plus the back rail thickness.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com.
12-3-2023 19:22 – US/CA/MX
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>