AVA Z15 Bluetooth Speaker User Manual
- June 16, 2024
- AVA
Table of Contents
AVA Z15 Bluetooth Speaker
Product Information
Specifications
- Product Name: BLUETOOTH SPEAKER AVA+ Go Z15
- Packing List: BLUETOOTH SPEAKER AVA+ Go Z15, User Manual
FAQ
- Q: How do I know if the speaker is fully charged?
- A: When the speaker is fully charged, the red light will turn off.
- Q: Can I use this speaker in the rain?
- A: No, it is not recommended to use this speaker in the rain.
- Q: How often should I charge the speaker if I don’t plan to use it for a long time?
- A: If you don’t plan to use the speaker for a long time, it is recommended to charge it at least once a month to prolong its life.
Thank you for purchasing Bluetooth Speaker AVA+ Go Z15.
Please carefully read user guide in properly and keep this for further
reference.
Packing list
Key function direction
- Previous track/Volume down
- Next track/Volume up
- Pause/Play
- Mode Button
- Light button
Power On/Off
- Power On: Move the button to “ON” to power it on, the speaker will sound “ting ting ting, the blue light flashes.
- Power off: Move the button to “OFF” to power it off, the blue light turn off.
Key function direction
- Short press
- “- ” button when playing music, the player will play the last track;
- Long press
- “-” to decrease the volume continuously
- Short press
- “+ ” button when playing music, the player will play the next track;
- Long press
- “+” to increse t Long press he volume continuously
Bluetooth Connection And Charging
Bluetooth Connection
- Start the speaker, there is a prompt tone, Bluetooth enters the pairing mode and blue light flashes.
- Turn on the mobile phone, turn on Bluetooth, search for the Bluetooth code name “AVA+ GO Z15 ” and click; after a few seconds, you will hear the prompt tone of successful pairing and connection, the mobile phone displays connected, and the blue light is on.
- In subsequent use, as long as the device’s bluetooth is turned on, it can be automatically connected.
- If you want to connect to another device, long press “M” and hear the prompt tone.
Mode button
- Click on the”M”: Bluetooth, FM mode, TF card; USB.
Playing MP3 files from Micro SD or USB:
- Insert the USB drive into USB port or Micro SD card into TF Slot.
- Play, pause or skip a selected track using the controls on the speaker.
FM mode
- Press the M button into FM mode, short press pause/play button to search station automatically, press again to stop searching.
- Then, short press “+”, “-” to choose the FM station.
Note: In the FM mode, need in charging cable to increase the FM radio signal.
TWS function
While at the same time open two devices and not connected in the bluetooth mode, long press button light of either of the speaker. You will hear the prompt tone of successful pairing and connection and then, search for the Bluetooth code name “AVA+ Go Z15 ” and click to use this function.
Precautions
Attention
- Do not use abrasive cleaners to clean this product.
- Do not allow this product to be heated, close to fire source or direct sunlight for a long time. It will easy to burn and damage the electronic components.
- Do not attempt to disassemble this product to make any modifications.
- Do not use this product in the rain.
- lf you do not plan to use this product for a long time, please store it in a dry environment and charge the speaker at least once a month to prolong its life and avoid extreme temperatures and dust.
- lf you saw smoke coming out of the machine or other improper phenomenon , please contact the retailer to solve the issue immediately.
- Do not throw the machine.
Note
- In order to improve product performance, our products are constantly updated. lt is no additional notice about technical issues and this manual is for reference only, please forgive.
- Thank you for your purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>