Nekteck FE-7202NK Air Compression Leg Massager Instruction Manual
- June 16, 2024
- Nekteck
Table of Contents
Nekteck FE-7202NK Air Compression Leg Massager
Thanks for purchasing our product. Please read the instructions carefully before the use and keep it well for further reference.
Specifications
Safety Precautions
Warnings
- Those with any of the following conditions or persons who are receiving medical treatment should consult the doctor before using the machine:
- Using pacemakers or other medical devices that are susceptible to electrical interference;
- Suffering from malignant tumours;
- Suffering from cardiac diseases;
- Having serious peripheral neuropathy dysfunction or sensory disturbance caused by diabetes;
- Being unsuitable to do the massage because of traumas on the body;
- Keep it out of the reach of infants, children and people without the ability to use it independently.
- Don’t use another power adapter but the original one.
- Don’t scratch, damage, process, excessively bend, pull or twist the power cord power adapter. Otherwise, it may cause fire or electric shock.
- It is not allowed to be used when the power adapter dysfunctions or the plug is loose.
- Don’t plug or unplug the power adapter with wet hands.
- Don’t put the controller in the quilt or use the machine in high-temperature conditions.
- It is forbidden to remodel, disassemble or repair the machine without permission.
Cautions
- Stop using it immediately if you feel unwell. Don’t use it again, consult your doctor first.
- Don’t use it in the bathroom or other humid places.
- Unplug the power adapter from the socket before you clean and maintain it.
- Unplug the power adapter when you are not using it.
- Don’t walk around when you are using this item or wearing the wraps.
FAQs
-
Q1: How does this product massage?
A: There are 2+2 airbags inside. It will be inflated and deflated to simulate the kneading and stroking of tissues like human hands. It can relax our muscles, increase circulation and relieve pain. -
Q2: How many massage modes, and what’s the difference?
A: There are 2 massage modes-
Mode 1: Sequence Mode
In this mode, sleeves will be inflated and deflated alternately from lower to upper. -
Mode 2: Whole Mode
In this mode, sleeves will be inflated and deflated simultaneously and wholly.
-
-
Q3: What should I do if I feel the massage strength is too light or too tight?
A: There are 3 levels of massage strength selectable via the controller, please select the intensity that fits you. You can also adjust the strength by changing the tightness of the Velcro on the wraps. -
Q4: Why it does not work when I press the power button?
A: Please ensure both 2 air hoses are inserted into the controller, otherwise, it will not work -
Q5: How long should we use it?
A: We suggested you use it 1-2 times every day and 20 minutes per time. You can also use it longer if you feel too tired and want to enjoy it more. As long as you don’t feel any discomfort. -
Q6: Why does the controller get hot?
A: As we suggest, you can use it for 20 minutes per time normally. If it keeps working too long, the controller will get hot. That’s a normal phenomenon. -
Q7: Why does the controller make a sound?
A: The sound comes from the working air pump in the controller, it provides air continuously to the airbags in the wraps.
Troubleshooting
Names of component
Diagram of the Controller
Usage
Cautions: Please read safety precautions carefully before using the product. To get a better massage, please wear the sleeves properly.
-
Make sure to follow the directions on the tag and wear the warps on your calf properly.
-
Check and adjust the position and tightness as below, don’t wrap too tight.
-
Plug the power adapter into the controller and socket on each side.
-
Insert two air hose plugs into the controller correctly and completely.
-
Take up the controller and press the on-off button to start the machine.
- It will begin with mode 1 and strength 1 (The lowest) by default.
- It will shut off after 20 minutes (You can restart it manually).
-
Press the “Mode” button to switch and enjoy the different massage modes, the difference between these 2 modes can be seen on.
-
Press the “Air Pressure” button to select intensity.
-
Three pressure levels for choice. We suggest you use the lowest level at the beginning.
-
You can change the tightness of the warps to make the strength suitable as you like.
-
Press the On-0ff button to turn it off.
Warnings: We suggest 20 minutes each time as the best. After 20 minutes of work, it will shut down automatically but you can restart it.
Notes after use -
Unplug the power adapter from the socket.
-
Pull out the plugs of the power adapter and air hoses from the bottom of the controller.
-
Take off the wraps, and fold them into the storage bag or box.
Cleaning
Make sure to cut off the power when you clean the machine.
- If dirty, please wipe the controller, wraps and hoses with a soft cloth moistened with soap solution.
- Don’t use gasoline, alcohol, diluent and other irritating liquids to wipe the machine in case it causes malfunction or the components are damaged or discoloured.
- Don’t allow foreign matters to enter the hoses.
- Toothpicks can be used to remove the hair or chippings attached to the Velcros.
Storage
- Keep it out of the reach of children.
- Don’t disassemble the machine by yourself.
- Don’t place it in high temperature and humid environment
- Avoid direct sunlight.
- Avoid sharp objects or needles puncturing the airbags and the included hoses.
- Don’t place heavy stuff on it.
Disposal
Please adhere to the local regulations when you dispose of the unit
Package includes
- 2 x Leg Massager Wraps
- 1 x Hand-held Controller
- 1 x Power Adapter/ DC12V 1 A
- 1 x User Manual
- 1 x Portable Storage Bag
Contact us
If you have any problem during the use of this product, please feel free to
contact us. Our professional customer service team is always here to help you!
Email: support@nekteck.com
Website: WWW.nekteck.com
E-mail: support@nekteck.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>