Cable Matters 103101 4 Port 8K HDMI 2.1 Switch Instruction Manual
- June 16, 2024
- Cable Matters
Table of Contents
Cable Matters 103101 4 Port 8K HDMI 2.1 Switch
Installation Instructions
- Power off all devices.
- Connect the supplied power adapter to the DC SV port.
- Connect a display to the HDMI OUT port of the switch.
- Connect HDMI devices to the HDMI IN ports of the switch.
- Power on devices and change the display input to the switch’s HDMI input.
Operating Instructions
- To change HDMI input, press the INPUT button on the front panel of the switch, or with the included remote. An LED will be lit when switched to an active input.
- To toggle auto-switching, hold down the INPUT button for 3 seconds. The AUTO LED will be lit when auto-switching is enabled.
- To activate the remote, please remove the plastic tab protecting the battery.
Note: The remote must have a line of sight to the switch IR sensor.
Troubleshooting Tips
- For 4K 120Hz or BK feature support, connect the switch to a supported port on the display.
- Advanced HDMI features must be manually enabled on some televisions.
- 2 meters/ 6.6 feet or shorter BK HDMI cables are recommended.
Technical Specifications
- Host Connector : 4x HDMI female
- Device Connectors: 1x HDMI female
- Power: DC 5V / 1A
- Video Bandwidth: 48Gbps
- Video Resolution Support: Up to 8K@60Hz 4:4:4 12bit, 4K@120Hz 4:4:4 12bit
- Feature Support: HDCP 2.3, HOR, HDR10, HDR10+, Dolby Vision, HLG Pass-Through, VRR, ALLM, FVA
- Color Depth : 8-bit, 10-bit, 12-bit
- Color Space: RGB, YCbCr 4:4:4 / 4:2:2 / 4:2:0
- HDMI Audio Formats : LPCM 7.1CH, Dolby TrueHD, and □TS-HD, Master Audio
Product Diagram
- Power LED [White] Indicates power status
- Input LED [White] Indicates which input is active
- AUTO LED [White] Indicates the auto-switching mode
- IR Sensor For remote signals
- INPUT button. Press to switch inputs. Press and hold for 3 seconds to toggle auto-switching
- DC 5V port
- HDMI IN ports
- OUTPUT port
IR Remote
- 1/2/3/4: Press to select HDMI input
- Next: Press to select the next HDMI input
- Battery: CR2025 Lithium battery
Customer Support and Contact Information
Cable Matters offers lifetime technical support as an integral part of our commitment to provide industry-leading solutions. Email us with any questions at support@cablematters.com.
Warranty Information
This product is backed by a limited one-year warranty. Cable Matters warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair or replaced with equivalent products at our discretion. The warranty covers parts and labor costs only. Cable Matters does not warrant its products from defects or damages arising from misuse, abuse, or alteration. or normal wear and tear.
Limitation of Liability
In no event shall Cable Matters Inc. [including their officers, directors, employees, or agents) be liable for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of, or related to the use of this product exceeding the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device must not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Trademark Statements
Cable MatterslW is a registered trademark or trademark of Cable Matters Inc.
All rights reserved. All other trademarks are the property of their respective
owners. The terms HDMI®, HDMI\I!) High-Definition Multimedia Interface, and
the HDMI® logo are trademarks or registered trademarks of HDMl<ll Licensing
Administrator, Inc.