FEIYAW WF305290 Full Size Upholstered Platform Bed with Flower Pattern Velvet Headboard Instruction Manual
- May 15, 2024
- FEIYAW
Table of Contents
FEIYAW WF305290 Full Size Upholstered Platform Bed with Flower Pattern Velvet Headboard
Detail View
Part List
-
Head board-1pc
-
Head board legs -2pcs
-
3R Side rails-1pc
3L Side rails-1pc
- 4R Side rails-1pc
4L Side rails-1pc
-
Foot board -1pc
-
Side rails support bar-4pcs
-
Head board cross bar-1pc
-
Center support bar-2pcs
-
Cross bar-1pc
-
Side rails support legs-2pcs
-
Connected support leg-1pc
-
Middle support leg-2pcs
-
Legs-2pcs
-
Slats-12pcs
Hardware List
-
A. Allen Key (1pc)
-
B. Bolts (4pcs)
-
C. Bolts (32pcs)
-
D. Bolts (21pcs)
-
E. Two hole iron (2pcs)
-
F. “7” Connector (2pcs)
-
G. Center support bar fittings (2pcs)
Assembly Instruction
Attention: Do not tighten the screws before completing the entire installation. If you have any difficulty with the installation process, please feel free to contact us.
Step 1 x2
Fix the Headboard legs 2 to the Headboard 1 with Bolt B by using Allen
key A. You can chose the holes a and c or b andd.
Step 2 x2
Fix the Headboard cross bar 7 to the Headboard legs 2 with Bolt C and
Two hole iron E by using Allen key A.
Step 3 x2
Connect to Side rail support bar 6 Side rails 3 and 4 with Bolts D
by using Allen key A.
Step 4 x2
Fix the side rails support leg 10 to the side rail with Bolts C by
using Allen key A 10
Step 5 x2
Fix the assembled siderail to the Headboard legs 2 with Bolt C and “7”
Connector F by using Allen key A. 2
Step 6 x2
Fix the assembled siderail to the footboard 5 with Bolt C and legs 13
by using Allen key A. 5
Step 7 x2
Fix the Center support bar fittings G to the Headboard cross bar 7 and
foot boart 5 with Bolts C by using Allen key A
Step 8 x2
Connect Center support bar 18 with Connected support leg 11 with Bolts
D by using Allen key A. Fix the Middle support leg 12 to the Center
support bar 8 with Bolts D by using Allen key A.
Step 9
Fix the Center support bar 8 to the headboard cross bar 7 and foot
board 5 with Bolts D by using Allen key A
Step 10
Fix the cross bar 9 to the side rails support legs 10 and Connected
support legs 11 with Bolts D by using Allen key A
Step 11
Fix the slats 14 to the side support bar ,then assemble is finished,
now please tighten all hardware and enjoy the bed.