weelko 2235B.3.A26 MAXI Beauty Bed Instruction Manual

: June 3, 2024
: weelko

Table of Contents

weelko 2235B.3.A26 MAXI Beauty Bed
USE OF THE MANUAL
RECYCLING
ASSEMBLY STEPS
CLEANING AND MAINTENANCE
ACCESSORIES NOT INCLUDED
TECHNICAL SHEET
USING FC004.RST
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

weelko 2235B.3.A26 MAXI Beauty Bed

USE OF THE MANUAL

It is important that you read and retain this user manual for future reference. It contains important information on its use and maintenance. You can also ask a professional for guidance to make sure you are using the bed correctly.

WARNING

Never under any circumstances attempt to open or inspect the internal components of the bed. If an inspection becomes necessary, please contact your supplier or a suitably competent technician.
Never use the bed in humid or poorly ventilated environments, such as wet rooms, bathrooms etc. to prevent damage to the electrical components.
Never use the unit outdoors; exposure to the elements can cause damage.

If the power cord was destroyed, please ask a professional to service and replace it to avoid hazards or contact the dealerfor service.

EC-DECLARATION OF COMPLIANCE

This product meets the following directives:

Low Voltage Directive: 2014/35/EU
Electromagnetic Compatibility Directive: 2014/30/EU

RECYCLING

Whenever any of our electrical products or their presentation packaging bear this symbol, it means that these products should not be treated as conventional household waste in Europe. To ensure proper treatment of this waste, dispose of it in accordance with local laws or as required for the disposal of electrical equipment. This initiative will help preserve save natural resources and improve standards of environmental protection regarding the treatment of electrical waste.

WELCOME!
Thank you very much for your purchase. This treatment bed is a reliable, safe and easy-to-use piece of professional salon furniture. This bed designed for multi-purpose use only by trained beauty and professionals. Although the treatment bed is designed for use in multiple treatment positions, it should never be used for any purpose than its intended design limitations. We will accept no responsibility for any accidents that occur due to incorrect operation. The company reserves the right to amend the details of the beds with no prior notice. If any mistakes are found in these instructions, please feel free to send us an e-mail informing us so that we can correct them.

CONTENT

On arrival of the beauty bed, check the presence of the following items:
Main coach assembly with power lead.
Adjustable sliding head with breather hole and plug.
Sliding footrest support (extensible part.
Left and right fold-over arm supports.
Your beauty couch is packaged complete; everything required for immediate use.
Unbox and follow assembly steps.

UNBOXING
Open de box carefully trying not to damage the bed inside. Avoid using any cutting tools which could damage the product. Take the bed out of the box. Lift it by the metal frame beneath the casing at eachside. 2 or more persons should take it out of the box due to it size and weight.

ASSEMBLY STEPS

Once the bed is on its final place proceed as follows:
The bed should be levelled to the working area by adjusting the levelling feet at each corner of the base if required.
Insert arm with upholstery facing upwards and then secure the armrests,
Slide in the headrest and lock it. (If the bed is provided with a headrest)
Slide the extensible footrest and lock into the required position. (If provided)
After completion of assembly and once the bed base is levelled, you may then plug in the bed to the mains supply. Now it is ready for use.

SAFETY PRECAUTIONS

The maximum allowed lifting limit is around 180 kg. Do not exceed this weight.
Always ensure that the bed is used within the correct electrical voltage range. Unless otherwise requested, beds are manufactured 220-240v rated andshould be used with the same rated supply.
When the bed is placed for use, always ensure that the power cord is in such a way, that it will not get caught in the moving parts or jammed under the wheels of the bed (if fitted) or any other little piece of furniture nearby.
The bed is not recommended for wet or high humidity environments such as hydrotherapy rooms. Any prolonged exposure to high moisture conditions may affect the electrical components and may result in failure.
Always disconnect the bed from the power supply before inspection. Children are not allowed to use the bed or be near the equipment while it is on use. Do not leave children unsupervised near the bed.
Always take care to avoid anyone sitting on the head or leg parts of the bed since this will cause damage to the bed and its electronic, hydraulic and mechanical functions.
When lifting your bed for moving it, always lift by the metal frame beneaththe casing at each side. Unplug it prior to any movement. 2 or more persons should move the bed due to its size and weight.

USING YOUR BED
If you purchased 2235B.3.A26, your bed is equipped with 3 engines that adjust height, backrest and seat inclination. The footrest is adjustable by gas lift. If you purchased 2235D.4.A26 your bed is equipped with 4 engines that adjust height,backrest, seat inclination and legrest.

ROCKER SWITCHES
A rocker switch is a easy-to-use button which highligths for its reliability. It’s an on-off switch that rocks back and forth like a see-saw. They are placed at the backrest, seat and foot part (4-engine bed) of the bed. By pressing the buttons, you can adjust all the movements of the bed.

RESET FUNCTION
The reset function is used to settle the bed at 0 position. That means that by pressing the metal button placed on the side of the backrest, over the rocker switches, all the bed sections will move simultaneoulsy to their 0 position. For the correct use of the RESET function please check that the footrest is completeley retracted (not extended). This is a safety measure to avoid any collision to the floor.

CLEANING AND MAINTENANCE

Before any cleaning or maintenance on your bed, unplug it from the mains supply for safety reasons. . The frame, casings and mettalic parts should be cleaned using a dry cloth, or slightly damp cloth for severe stains. Sterilising solution may be used in a dilluted form if necessary to remove any stains. Abrasives should be avoided at any time. . In order to clean the upholstery, mix clear water with a mild soap, soak in water and remove excess of water. Next, rinse with clear water and dry. Clean only in one direction. Do not use agressive products with alcohol base or any abrasive solutions. This may damage and shorten the life of the upholstery.

ACCESSORIES NOT INCLUDED

Cover Weelko Beauty	Bed cover
HC004.RST	Hand controller
FC003.RST	Foot controller (2235B.A26)
FC004.RST	Foot controller (2235D.A26)
WH.01.2	Wheels
50080.1	Paper roll holder
Heating	2235D.A26.HT

TECHNICAL SHEET

Reference| 2235B.3.A26

2235D.4.A26

---|---
Voltage| 220 V / 240 V
Frequency| 50/60 Hz
Rated power| 0,12 kWh
Net weight| 85 kg
Gross weight| 95 kg
Package dimensions| 148 72 62 cm
Height| 59/88 cm
---|---
Width

(with/without armrest)

(min./max. height)

| Yes

(70/102)

Facial hole| Yes
Headrest regulation| Yes, extendable (±8

cm) and inclination

Footrest regulation| Yes (±15 cm)
Maximum load| 180 kg
Upholstery| White PU
Number of motors| 3 or 4

ASSEMBLY OF ACCESSORIES
In case you purchased a hand controller & a foot controller as an option and you want to use them simultaneaously, you will need a forked cable (ref. 60037) which has to be plugged directly in thecontrol box

USING HC004.RST

See picture below for reference.

Press key 1/2 to adjust backrest.
Press key 3/4 to adjust height.
Press key 5/6 to adjust tilt function
Press key 7/8 to adjust the legrest.
In this bed model this key is inoperative.
Memory Set (only operative for models with memory function included)
ON / OFF light: When this LED is on it means that the handcontroller is correctly plugged in the bed.
Heating light indicator (only for beds equipped with built-in heating option)
Reset function: Press key 17 to settled the bed at 0 position.
Heating key: Press the key to switch on the heating. Press it again to switch it off. (only for beds with heating)

USING FC004.RST

See picture below for reference.

Press key 1/2 to adjust backrest.
Press key 3/4 to adjust height.
Press key 5/6 to adjust the tilt.
Press key 7/8 to adjust the legrest.

ASSEMBLY OF WHEELS, (WH01.02)

For transport safety measures, the wheels are not installed in the bed. You will have to screw them at arrival.
Unscrew the 4 levelling feet placed underneath the bed.
Screw the 4 wheels at the levelling feet housing.
Remember to lock the wheels for use.