AUTOMOTIVE 60784 2 in 1 Magnetic Phone Cup Holder Instruction Manual
- June 16, 2024
- AUTOMOTIVE
Table of Contents
Instruction Manual
SINVANHO
2 in 1 Car Cup Holder with Phone Mount
Install Instruction:
Snap the ball into groove on the back of the holder Tighten the nut clockwise onto the back of the holder Put base in cup holder, then twist knob to fit Twist the two knobs on the neck and turn the bottom firmly to adjust the angle Stick the metal sheet to the appropriate position on the back of your phone Place your phone on the nagnetic mount horizontally or vertically
Warm Tips:
- If you want to rotate the entire bracket bar, hold the bracket bar at the bottom and turn it firmly in a counterclockwise direction.
- If your cup is too big and hard to get it out, you can try cutting off the soft rubber tabs.
- If you have adjusted the base of the cup holder to the maximum diameter, and it’s still not stable enough, you can put the 3 gripper caps on and try again.
- When installing the phone holder, you only need to push the ball hard to the back of the phone holder and then tighten the plastic ring, no need to use other tools.
If you need more information or help with this product, please feel free to contact us, our after-sales email is [email protected]
Read User Manual Online (PDF format)
Loading......