Nilight 90006B LED Light Bar Rocker Switch Instruction Manual
- June 16, 2024
- Nilight
Table of Contents
Rocker switch series (5-pin)
5-PIN ROCKER SWITCH
Wiring Method: A
Accessory switched power source
(Lower light wil tum on when the key ts turned on}
Wiring Method: B
Constant power source/Battery (Lower light will turn on only when the switch
is turned ta the an position)
PIN-TAB OUTS:
8- Upper Light Neg. (-) source
7- Lower Light Neg, (-)
3- Cuigoing to relay, accessory or equipment
2- incoming from power
6- Lower Light Pos. (+)
wiring Diagram for Hooking Up the Relay
Make sure you are using a switch and wires sufficient to handle the power that
you are carrying. In cuctier Claw appl catacs, a relay may be ceeded Always
use a fast bow fuse cf tated ar perage Use tenmioats co gouge erouch grade tc
harcle the amperage in switch to avoid heat avd damage.
To avoid short dreuit, wrap the conductive pins on the switch with insulation
tape
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>