BLUE WEAR 016524 Rough Workwear Gloves Instruction Manual
- October 30, 2023
- BLUE WEAR
Table of Contents
BLUE WEAR 016524 Rough Workwear Gloves
Product Information
The Rough Workwear gloves are designed to provide protection to the hands while working in rough and tough conditions. The gloves come in size 11 and have an item number of 016524. They are manufactured in China and distributed by Jula AB. The gloves meet the standards EN ISO 21420:2020 and EN 388:2016+A1:2018 and are compliant with Regulation (EU) 2016/425 Personal Protective Equipment. They bear the CE marking to demonstrate compliance with the regulation and are tested on the hand palm of the glove.
Product Usage Instructions
- Ensure that the gloves fit properly before using them.
- Wear gloves while working in rough and tough conditions to protect your hands.
- Do not use the gloves for any other purpose than intended.
- Do not use the gloves if they are damaged or torn.
- Store the gloves in a cool and dry place away from direct sunlight.
- Follow the washing instructions carefully to maintain the quality of the gloves.
ASSEMBLY GLOVES
WARNING
- Gloves shall not be worn when there is a risk of entanglement by moving parts of the machine.
- The durability of the gloves depends on how they are used.
- Always check that the gloves are in good condition before using them.
- Keep the gloves in a clean, dry, and ventilated place, free from moisture, dirt, mold, and sunlight.
- Do not leave the gloves in contaminated condition if they are going to be reused.
- Remove as much as possible of any contamination from the gloves after using them.
- Dispose of in accordance with current legislation.
- The materials used are not known to cause allergies.
- If any reaction occurs discontinue use.
CE
- EU DECLARATION OF CONFORMITY
Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
- This declaration of conformity is issued under the sole responsibility of the manufacturer.
ASSEMBLY GLOVES PU Size 7, 8, 9, 10, 11
- Conforms to the following directives, regulations, and standards.
| Directive/Regulati on | Harmonized standa rd |
|---|---|
| PPE (EU) 2016/425 | EN ISO 21420:2020, EN 388:2016+A1:2018 |
Cat II
The PPE is identical to the PPE which is subject to EU type-examination certificate No
- 0075/2169/162/10/21/1784
Name and address of the notified body involved
- CTC Parc Sc. T. Garn. – 4, rue Herm. Frenkel, 69367 Lyon Cedex 07, France NB 0075
This product was CE marked in the year
EN 388:2016+ A1:2018 Cat II
- The product was not assessed for this property.
Item no. 016524
- Jula AB. www.jula.com.
- Box 363, SE-532 24 Skara
- Made in China
- Notified body/Jednostka notyfikowana No. 0075:
- CTC, Parc Sc. T. Garn. – 4, rue Herm.
- Frenkel 69367 Lyon Cedex 07, France.
- These gloves bear CE marking to demonstrate compliance with Regulation (EU) 2016/425 Personal Protective Equipment and meet the standards
- EN ISO 21420:2020, EN 388:2016+A1:2018.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>