DEPSTECH DS500 Industrial Endoscope User Manual

DEPSTECH DS500 Industrial Endoscope

Product Features

• DEPSTECH is a booming technology company, specialized in creating various endoscopes and committed to make you feel more secure.
• S500 is a high-performance industrial endoscope, equipped with 5″ IPS LCD Screen, has the camera and video functions and saves into TF memory card (Micro-SD card). Such camera uses high-performance CMOS chip that supports the record-high frame rate to get clear images with Bluart 2.0 technology, widely used in industrial maintenance, appliance maintenance, mechanical maintenance & design and other fields.

Special Warning and Notice

• This product is a camera of industrial endoscope, not applicable to medical or physical examination!

• In order to lengthen the battery life, it is recommended that you should charge the device once every 3 months, whether it is used.

• Do not try to replace internal battery by yourself, because unprofessional operation may lead to risks of personal injury due to battery overheating, etc. Safety and Protection

• Probe of camera is an electronic device of high precision, so please do not hit the probe of camera or pull the cables, which may lead to failure of the device.
  With IP67 waterproof layer, the probe shall be used with extra care and protected from scratches!

• Probe of camera is made from materials that are not high temperature resistant, so make sure the internal temperature of any internal combustion engine or other equipment whose internal temperature is higher has been cooled when they are examined, otherwise the device will be directly damaged!

• In case of device damaged, please do not dismantle it by yourself, but contact the seller or the supplier for more professional maintenance services.

• Children may not use this device independently without the guidance of adults.

Operating and Storage Environments

• The device should be operated at an ambient temperature of 32-113″f ° (0~45 C).
• The device should be stored in a dry, clean, oil-free and waterless place without any chemical liquid.

Product Introduction

Power Button

Hold this button for 2s to power on/off fhe endoscope.

1.

• Single press to take a photo
• Hold lhis button to start video record, and single press to end the video record.

2.

• Click to brighten the LED lights of the camera
• Move the cursor down (In the menu)

3.

• Click to dim the LED lights of the camera
• Move the cursor up (In the menu)

4.

• When previewing the interlace, single press this button to rotate the image 180°
• When previewing the interface, long press this button to swilch lens.

5.

• Hold this button for 2s to enter/exit the album
• Click to confirm choices (In the menu)

6.MENU

• Click to enler the setting menu

6.Working Status LED Indicator & Charging Status LED Indicator

• Blue LED Indicator ttash : Low batlery status
• Blue LED Indicator on : Worlcing status
• Red LED indicator flash : Charging status
• Red LED Indicator on : Charging finished

7.Aviation Connector

• Connect the snake cable camera probe with this interface

8.TF Card Slot

• Support up to 32G TF card
• Please tormat ii tor the tirst lime of usage

9. Type-C Charging Port

• For charging (Type-C cable connected to the adapter)
• For data transmission (Type-C cable connected to PC client)

10.Reset Button

• Short-click the reset button to shut down the device

11.Fill Light Button

• Click to control the external LED fill lights on/off

UI Introduction

Language Setting

TF Card Status Screen Rotation 180- @Main Lens G)side Lens

The default language of the device is English; If another language is required, please follow the steps below:

1. Click the MENU button to enter the menu interface, select Language by pressing the – button, and then press the OK button, Enter the language setting interface.

2. Click i I-$- button to select the language you need, and then press OK 1 ?1 button to switch the language.

Photo/Video

1.  Take photos by pressing button.
2.  Long press to start video recording, single press to end video recording.

View PhotoNideo

1 . Long press OK in preview mode to enter the photo album. – +
2. Press to view photos, Click OK to play videos.
3. Press OK to exit the photo album.

Delete PhotoVideo

1. When viewing photos/videos, press MENU to enter the photo/video detail page.
2. Press to choose to delete the current file or all files. 05

Lens Switching

When the product is turned on it defaults open the main lens, long press to switch the lens.

TF Card Formatting

1. On the preview interface, press the MENU button to enter the menu;
2. Press to select “Format” options;
3. Press OK to enter the option interface, Select “OK”;
4. Wait for successful formatting.

Copy Photo And Video Files To Computer

1.  Use a TF card reader to copy data directly.
2. Use a Type-C cable to connect to the computer to copy the Setting path.
3.  Please connect the product to your computer.
4. Press the MENU button to enter the menu.
5. Select “Data transmission”.
6. Press the OK button to start copying to computer.

WARNING

If the device is not connected with computer, click “Data transmission”  on the setup interface, then USB icon shows up on the display; Please press the MENU button to exit. It is normal for “No Signal” to appear on the screen when you press the MENU button to exit data transmission.

Charging Instructions

1. Connect the device to the DC 5V adapter for charging;
2. The red indicator light flashes when the device is charging, and is always on when fully charged.

Guide For Accessories Installation

Installation method:

Turn counterclockwise-remove protect cap

Turn clockwise-tighten accessories

Specifications

Side Lens: 78′

Video Spec| 1080P/15-30fps
Battery life| 5H
Charging time| 4H
Charging Voltage and current| DC 5V/2A

Packing List

FCC Requirement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• CE compliance : This device complies with EN 60065 standard, which means this device will not do harm to the user or products as following situations:

  1. Electric shock
  2. High temperature
  3. Radiation
  4. Explosion from inner

EU Conformity Statement : This product and – if applicable – the supplied accessories too are marked with ‘CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/35/EU, the RoHS Directive 2011/65/EU and Amendment (EU) 2015/863.

• WEEE Notice : 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: wwwrecyclethis.info
• 2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate  admium (Cd), lead
  (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info

EC REP : E-CrossStu GmbH. Mainzer Landstr.69,60329 Frankfurt am Main UK REP: DST Co.,Ltd. Fifth Floor 3 Gower Street, London, WC1 E 6HA, UK

Customer Services

Please contact us if you have any questions, we love to hear from you

• www.depstech.com
• [email protected]
• Facebook Official Page: @DEPSTECH.FANS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>