NEUTRIK NA-TM-KIT Bracket Set User Guide
- June 16, 2024
- NEUTRIK
Table of Contents
NEUTRIK NA-TM-KIT Bracket Set
Product Information
The NA-TM-KIT is a truss yoke kit designed for the installation of up to 2 devices on a truss. It is compatible with all our network devices, including the NA2-IO-DLINE, NA2-IO-DPRO, and the NPS-30W. The kit includes 2 safety frames and a set of screws to ensure a secure installation on a truss.
Specifications
- Product Name: NA-TM-KIT
- Compatibility: All network devices (NA2-IO-DLINE, NA2-IO-DPRO,NPS-30W)
- Maximum Device Capacity: 2
Product Usage Instructions
Step 1: Prepare the Truss
Before installing the NA-TM-KIT, ensure that the truss is suitable and securely mounted. Make sure there is enough space to accommodate the devices you wish to install.
Step 2: Attach the Safety Frames
- Take the two safety frames provided in the kit.
- Position the safety frames at the desired locations on the truss.
- Using the screws provided, attach the safety frames securely to the truss.
Step 3: Install the Devices
- Place the devices (NA2-IO-DLINE, NA2-IO-DPRO, NPS-30W) onto thesafety frames.
- Ensure that the devices are aligned properly and securely seated on the frames.
- Use the screws provided to attach the devices to the safety frames.
Step 4: Test and Secure
After installation, test the devices to ensure they are functioning correctly.
Make any necessary adjustments or tighten the screws as needed to ensure a
secure and stable installation.
NA-TM-KIT
The NA-TM-KIT is a truss yoke kit for the installation of up to 2 devices on a
truss. It’s compatible with all our network devices, such as NA2-IO-DLINE, NA2
-IO-DPRO and of course the NPS-30W. The kit comes with 2 safety frames and a
set of screws to allow a safe installation on a truss.
Application
All rights reserved / 21.12.2023
Frequently Asked Questions
Can I install more than 2 devices using the NA-TM-KIT?
No, the NA-TM-KIT is designed to accommodate up to 2 devices only.
Is the NA-TM-KIT compatible with devices from other manufacturers?
The NA-TM-KIT is specifically designed for use with our network devices (NA2 -IO-DLINE, NA2-IO-DPRO, NPS-30W) and may not be compatible with devices from other manufacturers.