IPEVO VOCAL HUB Wireless Audio System User Guide

IPEVO VOCAL HUB Wireless Audio System

Specifications

• Product Name: IPEVO VOCAL HUB
• Product Type: Wireless Audio System
• Connection Modes: USB Mode, Bluetooth Mode, Line IN/OUT Mode
• Bluetooth Connection Range: At least 15m (49ft)
• Optimal Placement Distance: At least 1.5m (4.9ft)
• Battery Life: Up to 40 hours
• Charging Port: USB-C

USB Mode

For meeting rooms and personal computers

1. Connect Power:
   • VOCAL HUB: Connect the provided USB cable to your computer to power on.
   • IPEVO VOCAL: Press and hold the power button for 3 seconds to turn it on.
2. Pairing :
   • VOCAL HUB can be paired with up to 6 IPEVO VOCALs.
   • Pairing has to be done one at a time.
   • After pairing, it is recommended to attach a label with the corresponding number on each of the paired IPEVO VOCALs for easy identification.

Bluetooth Pairing

1. Press and hold the selected numeric key on VOCAL HUB and the Bluetooth pairing button on IPEVO VOCAL simultaneously for 3 seconds to pair them.
2. Successful pairing is indicated by a beep, and the LED indicators on VOCAL HUB and IPEVO VOCAL will light up simultaneously and remain on.
3. Switch the Mode button on VOCAL HUB to USB mode. The LED indicator will turn red.

Bluetooth Mode

For mobile phones and tablets

1. Connect Power & Pairing:
   • VOCAL HUB: Connect the provided USB cable to the power supply to power on.
   • IPEVO VOCAL: Press and hold the power button for 3 seconds to turn it on.
2. Select Modes & Pairing with Phones/Computers:
   • Switch to the Mode button on VOCAL HUB to Bluetooth mode. The LED indicator will turn blue.
   • Turn on the Bluetooth on your computer or mobile phone and connect to VOCAL HUB.

Quick Start Guide

IPEVO VOCAL HUB
Wireless Audio System

USB Mode

For meeting rooms and personal computers

Connect Power

• VOCAL HUB:Connect the provided USB cable to your  computer to power on.
• IPEVO VOCAL:Press and hold the power button for 3 seconds to turn it on

Bluetooth Pairing

• Press and hold the selected numeric key on VOCAL HUB and the Bluetooth pairing button on IPEVO VOCAL  simultaneously for 3 seconds to pair them.
• Successful pairing is indicated by a beep, and the LED indicators on VOCAL HUB and IPEVO VOCAL will light up simultaneously and remain on.
• Switch the Mode button on VOCAL HUB to USB mode. The LED indicator will turn red.

Bluetooth Mode

For mobile phones and tablets
Connect Power & Pairing

• VOCAL HUB:Connect the provided USB cable to the power supply to power on.
• IPEVO VOCAL:Press and hold the power button for 3 seconds to turn it on.
• The Bluetooth pairing procedure is identical with the USB mode pairing, step

Select Modes & Pairingwith Phones/Computers

• Switch to the Mode button on VOCAL HUB to Bluetooth mode. The LED indicator will turn blue.
• Turn on the Bluetooth on your computer or mobilephone and connect to VOCAL HUB.

Line IN/OUT Mode

For upgrading existing system’s audio

Connect Power & Pairing

• VOCAL HUB: Connect the provided USB cable to the power supply to power on.
• IPEVO VOCAL: Press and hold the power button for 3 seconds to turn it on.
• The Bluetooth pairing procedure is identical with the USB mode pairing, step

Select Modes & Connecting to Existing Conference Room Equipment

• Switch to the Mode button on VOCAL HUB to Line IN/OUT mode. The LED indicator will turn off.
• Connect VOCAL HUB to your current conferencing  system via the 3.5mm audio cables.

Operating instructions for IPEVO VOCAL

Volume (Speaker)
Turn the knob all the way to the right to maximize the volume.

Omni
Enable OMNI omnidirectional reception mode.

Charging
To charge IPEVO VOCAL, connect it to a power source via a USB-C cable.

Knowing your IPEVO VOCAL HUB

1. Mode button

   • Press once to switch
   • Press and hold for 3 seconds to turn on/off the VOCAL HUB.

2. Connection mode LED indicatorRed: USB mode

   • Blue: Bluetooth mode
   • Off: Line IN/OUT mode

3. Bluetooth pairing button and LED indicator
   

   • Quick flash: Pairing
   • Constantly on: Paired
   • Slow flash: Not paired

4. Audio input jack

5. Audio output jack

6. USB port

Knowing your IPEVO VOCAL

Knowing your IPEVO VOCAL

1. AI Voice for Mic
   •  Turns noise reduction on/off for the microphone.
2. AI Voice for Speaker
   • Turns noise reduction on/off for incoming calls.
3. Microphone mode switch
   • Switches between the directional and omnidirectional microphone modes.
   • When in the directional mode, only the front microphone is capturing sound in a 120° range. © Volume knob
   • Turn clockwise to increase the volume of the speaker

FCC Declaration

Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

IMPORTANT NOTE:

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Industry Canada statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions

1. This device may not cause interference
2. This device must accept any interference, including interference that may cause undesired operation of the device

Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FCC ID: WKP-CDHB-01IP
IC: 23924-CDHB01IP
CAN ICES-003(B)/NMB-003(B)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>