SCHMERSAL AZ 16-12ZVRK-M20 Safety Switch with Separate Actuator Instruction Manual

SCHMERSAL AZ 16-12ZVRK-M20 Safety Switch with Separate Actuator

Specifications

• Product Name: Safety switch with separate actuator AZ 16-12ZVRK-M20
• Ordering Code: [insert ordering code]
• Special Versions: [insert special versions]
• Purpose: The safety switchgear is designed to execute safety-related functions as part of an entire plant or machine.
• Technical Data: [insert technical data]

Dimensions
The dimensions of the safety switch are as follows:

• [Insert dimension 1]
• [Insert dimension 2]
• [Insert dimension 3]

Electrical Connection

General Information for Electrical Connection
When connecting the safety switch electrically, follow these guidelines:

1. [Insert guideline 1]
2. [Insert guideline 2]
3. [Insert guideline 3]

Contact Options
The safety switch provides the following contact options:

• [Insert contact option 1]
• [Insert contact option 2]
• [Insert contact option 3]

Set-up and Maintenance

To ensure the safe operation and disassembly of the switchgear,
follow these instructions:

1. [Insert set-up instruction 1]
2. [Insert set-up instruction 2]
3. [Insert set-up instruction 3]

Disassembly and Disposal

Disassembly
If disassembly of the safety switch is required, follow these steps:

1. [Insert disassembly step 1]
2. [Insert disassembly step 2]
3. [Insert disassembly step 3]

INSTRUCTION

About this document

Function

• This document provides all the information you need for the mounting, set-up, and commissioning to ensure the safe operation and disassembly of the switchgear. The operating instructions enclosed with the device must always be kept in a legible condition and accessible.
• Target group of the operating instructions: authorized qualified personnel
• All operations described in the operating instructions manual must be carried out by trained specialist personnel, authorized by the plant operator only.
• Please make sure that you have read and understood these operating instructions and that you know all applicable legislations regarding occupational safety and accident prevention prior to installation and putting the component into operation.
• The machine builder must carefully select the harmonized standards to be complied with as well as other technical specifications for the selection, mounting and integration of the components.
• The information contained in this operating instructions manual is provided without liability and is subject to technical modifications.

Explanation of the symbols used

• Information, hint, note: This symbol is used for identifying useful additional information.
• Caution: Failure to comply with this warning notice could lead to failures or malfunctions.
• Warning: Failure to comply with this warning notice could lead to physical injury and/or damage to the machine.

Appropriate use

• Products in Schmersal’s range are not intended to be used by private end consumers.
• The products described in these operating instructions are developed to execute safety-related functions as part of an entire plant or machine. It is the responsibility of the manufacturer of a machine or plant to ensure the correct functionality of the entire machine or plant.
• The safety switchgear must be exclusively used by the versions listed below or for the applications authorized by the manufacturer. Detailed information regarding the range of applications can be found in the chapter “Product Description”.

General safety instructions
The user must observe the safety instructions in this operating instructions manual, the country-specific installation standards as well as all prevailing safety regulations and accident prevention rules.
Further technical information can be found in the Schmersal catalogs or the online catalog on the Internet: products.schmersal.com.

Product Description

Ordering code

• Product type description: AZ 16-(1)ZV(2)K-(3)-(4)-(5)

Special versions
For special versions, that are not listed in the ordering code, these specifications apply accordingly, provided that they correspond to the standard version.

Purpose

• The safety switches with separate actuators are suitable for sliding, hinged, and removable safety guards, which need to be closed to ensure the necessary operational safety.
• The safety switches are used for applications, in which the hazardous situation is terminated without delay when the safety guard is opened.
• When the safety guard is opened, the NC contacts are positively opened and the NO contacts are closed.

When the safety guard is opened, the NC contacts are positively opened and the NO contacts are closed.

• The safety switchgears are classified according to EN ISO 14119 as type 2 interlocking devices.
• CAUTION: The user must evaluate and design the safety chain per the relevant standards and the required safety level.
• WARNING: The entire concept of the control system, in which the safety component is integrated, must be validated to the relevant standards.

Warning about misuse

WARNING: in case of improper use or manipulation of the safety switchgear, personal hazards or damages to machinery or plant components cannot be excluded. There are no residual risks, provided that the safety instructions as well as the instructions regarding mounting, commissioning, operation, and maintenance are observed

Exclusion of liability

• We shall accept no liability for damages and malfunctions resulting from defective mounting or failure to comply with the operating instructions manual. The manufacturer shall accept no liability for damages resulting from the use of unauthorised spare parts or accessories.
• For safety reasons, invasive work on the device as well as arbitrary repairs, conversions, and modifications to the device are strictly forbidden, the manufacturer shall accept no liability for damages resulting from such invasive work, arbitrary repairs, conversions, and/or modifications to the device.

Technical Data

Approvals – Standards

General data – Features

Safety classification – Safety outputs

Mechanical data

Mechanical data – Connection technique

Mechanical data – Dimensions

Ambient conditions

Ambient conditions – Insulation values

Electrical data

Electrical data – Safety contacts

Electrical data – Auxiliary contacts

Note about the safety classification

• Suitable up to Cat. 1 / PL c.
• With 2-channel usage with a fault exclusion mechanism (if a fault exclusion to the 1-channel mechanics is authorized) and suitable logic applicable up to Cat. 3 / PL d
• (Determined values can vary depending on the application-specific parameters hop , d op, and tcycle as well as the load.)

If multiple safety components are wired in series, the Performance Level to EN ISO 13849-1 will be reduced due to the restricted error detection under certain circumstances

Mounting

General mounting instructions

WARNING: Please observe the relevant requirements of the standards ISO 12100, ISO 14119 and ISO 14120.

• The mounting dimensions are indicated on the rear of the component. The enclosure must not be used as an end stop.
• Any mounting position. The mounting position however must be chosen so that the ingress of dirt and soiling in the used opening is avoided. The unused openings must be sealed employing slot sealing plugs (AZ 15/16 – 1476-1 available as accessory) after fitting.

Mounting of the actuator

See operating instructions Actuator.

• WARNING: The actuator must be permanently fitted to the safety guards and protected against displacement by suitable measures (tamperproof screws, gluing, drilling of the screw heads). See operating instructions Actuator.
• WARNING: The actuator must be permanently fitted to the safety guards and protected against displacement by suitable measures (tamperproof screws, gluing, drilling of the screw heads.

WARNING: The actuator must be permanently fitted to the safety guards and protected against displacement by suitable measures (tamperproof screws, gluing, drilling of the screw heads).

Dimensions

All measurements in mm.

Electrical connection

General information for electrical connection

WARNING: The electrical connection may only be carried out by authorized personnel in a de-energized condition.
The contact labeling can be found in the wiring compartment of the switch. Appropriate cable glands with a suitable degree of protection are to be used.

Settle length x of the conductor: 6 mm

After wiring, dust and soiling must be removed from the wiring compartment. The safety switch is double-insulated. The use of a protective ground connector therefore is not authorised.

Contact Options
Contacts are shown with the safety guard closed. All NC contacts have positive break .

Set-up and maintenance

The safety function of the safety components must be tested. In the case of correct installation and adequate use, the safety switchgear features maintenance-free functionality. A regular visual inspection and functional test, including the following steps, is recommended:

1. Check for free movement of the actuating element
2. Check cable entry and connections
3. Check the switch enclosure for damage
4. Remove particles of dust and soiling

WARNING: Adequate measures must be taken to ensure protection against tampering either to prevent tampering of the safety guard, for instance using replacement actuators. Damaged or defective components must be replaced.

Disassembly and disposal

Disassembly
The safety switchgear must be disassembled in a de-energized condition only.

Disposal
WARNING: The safety switchgear must be disposed of appropriately by the national prescriptions and legislation.

FAQ

• Q: Can private end consumers use this product?
  • A: No, the products in Schmersal’s range are not intended for use by private end consumers.
• Q: Who is responsible for ensuring the correct functionality of the entire machine or plant?
  • A: It is the responsibility of the manufacturer of a machine or plant to ensure the correct functionality of the entire machine or plant.
• Q: Where can I find further technical information about the product?
  • A: You can find further technical information in the Schmersal catalogs or the online catalog on the Internet: products.schmersal.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>