RENPHO RF-FM062 Foot Massager with Heat User Manual
- June 15, 2024
- Renpho
Table of Contents
**RENPHO RF-FM062 Foot Massager with Heat User Manual
**
Introduction
Thank you for choosing the RENPHO Foot Massager with kneading and heating function. Please read the user manual carefully before use and keep it in a safe place for future reference. If you need assistance, please contact our support team.
Product Diagram
- Control panel buttons: Heat, Power, Speed
- Massage nodes
- Washable cover
- Power interface
- Heat emission hole
- Adjustable stand
Function
- HEAT: Press to turn on/off the heating function
- POWER: Press to turn on/off the massager
- SPEED: Press to adjust rotation speed between low and high level
- Removable mesh: Unzip to remove and clean; machine-washable
- Adjustable stand: Adjusts the height and angle of the foot massager
Product Operation Guide
- Plug the device to the power source.
- When the power indicator is red, it means the massager is in standby mode and green when the massager is operating.
- Press the “POWER” button to activate the massager. The first and the third massage nodes on the left foot will rotate clockwise, while the second massage node rotates counterclockwise. The respective nodes will rotate in the opposite direction for the right foot.
- Press the “HEAT” button to enable/disable the heating function.
- Press the “SPEED” button to adjust the rotation speed. Flashing red light indicates slow speed. Solid red light indicates fast speed.
- The foot massager will automatically shut off after 15 minutes to avoid over-heating.
- To remove the cover, simply unzip. Cover is machine-washable.
- For safety consideration, the motor will automatically shut off when the temperature gets too high from long massage duration or heavy load. Once the temperature cools down, the motor will then automatically operate as usual.
Note: We recommend limiting usage to 30 minutes per session to avoid mild pain or any discomfort.
WARNING
- This device may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or knowledge, provided that they are supervised or have been instructed on how to use the device safely and carefully aware of the risks of use.
- Children must not play with the device.
- Cleaning and maintenance must not be performed by children unless supervised.
- If the mains connection cable of this device is damaged, it must be disposed of. If it cannot be removed, the device must be disposed of.
- Do not insert any objects in the device apertures or in the moving parts. Ensure that the moving parts can move freely at all times.
- Do not force or jam any part of your body, such as your fingers, between the moving massage elements or their holders.
- Only to be used with the power supply unit provided with the appliance.
- Do not stand on or in appliance. Use only while seated.
CAUTION
- For environmental reasons, do not dispose of the device in the trash.
- Dispose of the unit at a suitable local collection or recycling point.
- Dispose of the device in accordance with CE Directive- WEEE (Waste Electrical and Electronic Equipment).
- If you have any questions, please contact the local authorities responsible for waste disposal.
Troubleshooting Guide
| Common Problems | Causes | Solutions |
|---|---|---|
| The device does not work | 1. Disconnected power or loosely plugged. 2. The | |
| motor automatically shut off due to long time use |
- Reconnect the device to the power source.
- Use the massager after the motor cools down.
The heating function is not working or not as expected| 1. The heating function is disabled. 2. Insufficient heating time.|
- Press the Heat button to enable the heating function.
- Please be patient as the motor takes about 7 to 10 minutes to heat up fully.
This is to avoid the heat temperature from rising too fast.
Package Included
- 1 x RENPHO Foot Massager
- 1 x User Manual
- 1 x Power Adapter
Product Specifications
Model: RF-FM062
Rated Voltage: 12V 2.5A
Rated Power: 30W
Auto-off Timer: 15 mins
Warranty Policy
Your RENPHO product purchase is covered by a one-year limited manufacturer warranty from the date of delivery.
For warranty terms and conditions, please visit:
https://renpho.com/pages/warranty-terms-and-conditions
Note: Product registration is not required for the warranty. If you choose not to register your product, it will not diminish the product warranty.
Customer Service
Please feel free to contact us if you have any questions or concerns. RENPHO Customer Service Team guarantees a quick response and hassle-free solutions to any issue you may have within business hours.
Tel: +44(0)7434-666088 (UK ONLY)
Monday-Friday 9:00AM-5:00PM(GMT)
Email: support-eu@renpho.com(UK&EU)
- For defective products or the return of items, please contact us with your order number within the specified warranty period. DO NOT dispose of any product parts as they may be required for inspection/repair.
Notice:
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
UK Importer: EEON(UK)LIMITED
Kemp House 160 City Road, London, EC1V 2NX, United Kingdom
EU Importer: Renpho GmbH
Lehmweg 17, 20251 Hamburg Hoheluft-Ost, Deutschland, Germany
Tel: +49 40 23969285 (DE ONLY)
Manufacturer: Shenzhen Ruiyi Business Technology Co., Ltd.
Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong
Cooperation Zone, Shenzhen, 518000 P.R.China
Richers & Vision Ltd.
Unit 58B, Bordon Enterprise Park, Budds Lane, Bordon, Hampshire, GU35 0JE,
U.K.
C &E Connection E-Commerce (DE) GmbH
Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
Email: info@ce-connection.de
