ZAVIA Punch 325 Bluetooth 5.0 Wireless In-Ear Headphones User Manual

ZAVIA Punch 325 Bluetooth 5.0 Wireless In-Ear Headphones

CHARGING AND BATTERIES

Before charging the headset with the charging cable, please check whether the charging cable is the same fast charging cable provided in the box.
Warning: The headset must be charged by original charging cable that included in box. The headset may be damaged by using incompatible charging cables. The voltage must be DC4.2V, and the charger of ordinary mobile phone 5V 1A can be supported.

HEADSET CHARGING

The headset uses built-in non-removable rechargeable batteries. Do not try to remove the battery from the headset in order to avoid damaged.

1. Turn off the headset power before charging.
2. Insert the USB charging cable into the headset charging interface, and the other end into the DC4.2V charger or other USB charging devices (Some power bank may be incompatible with charging).
   The red LED light is on when charging.

SPECIFICATIONS

• Bluetooth Version: vs.a
• Transmission Range: 10 meters
• Output Impedance: 160±20%
• Sensitivity: 100dB
• Driver Unit: CD10mm
• Battery Type: Li-Polymer
• Charging Interface: Micro
• Charging Time: < 2 hours
• Music Time: 15 hours
• Talk time : 10 hours
• Standby time : 120 hours
• Weight: 85g

BUTTON FUNCTIONS

• Power ON: Long press the multi-function button (MFB) for 3s until the blue and red light flash alternatively, then the headset will give a prompt tone “power on”.
• Power OFF: Long press the multi-function button (MFB) for 6s until the light off, then the headset will give a prompt tone “power otr’.

BLUETOOTH PAIRING:

1. Please keep the distance between headset and mobile phones within 10 meter.
2. Long press the headset MFB button for 3 seconds till the blue and red lights flash alternatively, the headset enters into bluetooth pairing mode, with a prompt tone “Connected”.
3. Open mobile Bluetooth function Search Device and search for the headset pair name “PUNCH 325”.
4. Select headset name “PUNCH 325” for mobile phone matching.
5. Completion of pairing, you will hear a prompt tone 11connected11 1 the headset is paired with mobile phone successfully.

Note: The headset pairing time should be in 5 minutes.
If the indicator light is off, the Bluetooth pairing state has stopped. If the Bluetooth have not matched successfully, please repeat above l to 5 steps to try again.

HEADSET DISCONNECTION

Long press MFB to turn off the headset, or Turn off the Bluetooth function of the mobile phone, or take the headset far away from the mobile phone (About 10 meters) or farther away, if Bluetooth is not reconnected within 5 minutes, it will automatically turn off.

HEADSET RE-CONNECTION:

1. Close the distance between the headset and the mobile phone toll meter.
2. The headset will enter into automatically re-connection mode. At this time, LED light is flashing, when re-connection is successful, there will be a prompt tone 11connected11•
3. Turnon mobile phone Bluetooth function and the headset will re-connect with the last connected phone automatically.
4. Re-play music and make phone calls and other functions.
   • Answer an incoming call: While having incoming call, the headset will prompt the incoming numbers, Click on the MFB, or use your mobile phone to answer the call.
   • Hang up an incoming call: Press the MFB, or hang up with your mobile phone.
   • Reject calls: After hearing the call prompt, long press the MFB for more than 2 seconds and release, or use your mobile phone to refuse calls.
   • Multi-function button(MFB): In the paired state, by using multi-function button you can play/ pause music, answer I refuse phone calls, recall last phone number & open Google Assistant.
   • Last re-dial call: By press twice the MFB button in pairing mode, automatic call goes to last dialed number from your dialed list.

Volume adjustment and song selection:
Short press button(+) volume up or short press button(-) volume down, long press button(+) next song or long press button(-) previous song.

VOICE PROMPT TONES

1. Prompt tone “Power ON” while the headset is power on.
2. Prompt tone”Power OFF” while the headset is power off.
3. Prompt tone “Connected” while the headset is paired.
4. Prompt tone “1,2,3 … 9” corresponding phone number while there is an incoming call.
5. Prompt tone”Disconnected” while the headset is disconnected.
6. Prompt tone “Low battery” while the headset is in low battery.

VOICE ASSISTANT:
In paired mode, press multi-function button for 1.5 – 2 seconds to wake up voice assistance.

LOW BATTERY WARNING: When the headset battery voltage is lower than 3.3v, red light indicator will flash every 3 seconds, with a prompt tone “low battery” tones in every 5 minutes.

CAUTIONS:

• Store and use this product in a normal temperature environment.
• Do not expose this product to rain or moisture.
• It cannot be disposed randomly because it may cause environmental pollution.
• Do not throw, to avoid damage caused by falling products.
• Do not disassemble, repair and modify this product.
• Do not use chemical solvents to wipe the product.
• The built-in lithium battery can1 t be disposed in the fire or other places to prevent causing fire hazards.
• Whenever there is damage, it needs to be repaired by professional personnel.

TERMS AND CONDITIONS
Zavia is the registered trademark of Zavia Telecom LLP. All trademarks, logos, brand names, product names & companies mentioned are properties of their respective owners.
Products, features, specifications, dimensions and other information content herein are subject to change without any prior notice as the product is under continuous upgradation.

LIMITED PROOUCTS WARRANTY AND LIABILITY

Liability of Zavia is limited to repair/ refund/ replacement of product found to be defective under specified normal use and not any kind of physical damage. All liabilities for special/ consequential losses/ damages and all warranties not stated herein, expressed or implied, including all implied warranties of merchantability or fitness for a particular purpose are hereby disclaimed. Actual products may differ slightly in appearance to illustrations/ pictures provided.

This warranty covers only genuine Zavia products, with valid purchase invoice.
It is not applicable to wear and tear, or any effects or damages caused by misuse of the product. There is no warranty on cable.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>