BliTZWOlF BW-WA3 PRO 120W Bluetooth Speaker User Manual

BW-WA3 PRO
User Manual

BW-WA3 PRO 120W Bluetooth Speaker

Specifications

12 (50% volume) hours Turn on the RGB lights
Battery Capacity| 16000mAh
Charging time| About 6 hours
Input voltage| 5V/3A
Maximum power| 120W
Size| 282x112x101mm
Waterproof level| IPXS
Product weight| 2654g
|

Instructions

the wireless search state by default,
waiting for the device to be connected; after the wireless connection is success -ful, the wireless status light will be on for a long time.
Turn RGB Lights On And Off| In the power-on state, short press the “POWER” button to turn off/on the RGB light.
Turn Off| In the power-on state, long press the “POWER” button for 2 seconds to turn off the wireless speaker.
Force Shutdown| In the crash state, long press the “POWER” button for 8 seconds to turn off the wireless speaker.
| Mode Switch| Short press the “MODE” button to switch the BT / TF / USB / AUX playback mode
Disconnect And Connect wireless| In the wireless connection state, long press the “MODE” button for 3 seconds to release the wireless connection.
Reset| Long press the “MODE” button for SS to restore the factory settings and clear the previous operation memory.
| EQ Toggle| The default EQ of the power-on speaker is subwoofer, press the “EQ” button for vocals, and then press the “EQ” button For 3D.
| TWS Box Matching Function| Short press the “TWS” button to enter the TWS mode; press the “TWS” button to exit the TWS mode when the TWS is connected; return to the wireless mode.
TWS box connection operation:
1.Turn on the two speakers (if other wireless devices are connected, disconnect them so that the speakers are in the wireless search state).
2.Press the “TWS” button of one of the speakers, then you will enter the TWS pairing mode when you hear the beep tone and the yellow light flashes:
3. After the pairing is successful, the yellow lights of the two speakers will light up at the same time and there will be a prompt tone. The wireless light of the main machine is flashing Wait for the mobile phone to connect, the blue light of the auxiliary machine is off;
4. After the TWS is connected, the host is connected to wireless or the host is plugged into the AUX to play the music and the sub-box will also play the music of the right channel of the correspond-ing song at the same time.
5. In the TWS connection state, press the “TWS” button to release the TWS connection to the box and the yellow light will turn off with a prompt tone to return to the normal state.
| Play/Pause| Press the “PLAY/PAUSE” button under BT/TF/USB playback status to pause playback.
Press the “PLAY/PAUSE” button in the AUX playback state to mute the playback.
Answer The Call| Press the “PLAY / PAUSE” button when the call comes in to answer the call
End The Call| Short press the “PLAY/PAUSE” button during a call to hang up.
| Call Rejection| Press and hold the “PLAY/PAUSE” button for 25 when the call is incoming, you can reject the call
Tail Number Redraw| In the wireless connection state, double-click the “PLAY/ PAUSE” button to redial the tail number
Voice Assistant| Long press “PLAY/PAUS” 3S to activate the voice assistant Function
| Volume Down| When playing music, short press the “-” key, the volume will decrease by one level, a total of 16 levels.
Previous Song| When playing music, long press the “-” key for 1.5S to switch to the previous song.
| Volume Up| When playing music, short press the “+” button, the volume will increase by one level, a total of 16 levels
Next Song| When playing music, long press the “+” button for 1.55 to switch to the next song.

• The speaker will automatically shut down if it is not connected for 10 minutes, and will not automatically shut down after connecting.
• In the power-on state, plug in the charging cable to perform emergency charging of external devices.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– – Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.

MADE IN CHINA

Documents / Resources

| BliTZWOlF BW-WA3 PRO 120W Bluetooth Speaker [pdf] User Manual
WA3, 2AQXL-WA3, 2AQXLWA3, BW-WA3 PRO 120W Bluetooth Speaker, BW-WA3 PRO, 120W Bluetooth Speaker, Bluetooth Speaker, Speaker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>