Neomounts FPMA-D500KEYB Monitor Arm Desk Mount Instruction Manual
- June 12, 2024
- Neomounts
Table of Contents
FPMA-D500KEYB Monitor Arm Desk Mount
Product Information
The product is the FPMA-D500KEYB, a mounting system for a monitor and keyboard. It is designed to be installed on a desk or table.
The product features an articulated arm that allows for adjustable positioning of the monitor and keyboard. It also includes a clamp and grommet for secure installation, a keyboard holder, and a decorative cover.
The product is compatible with monitors that have VESA mounting patterns of 75x75mm and 100x100mm. It has a weight capacity of 0-9 kg.
Product Usage Instructions
- Step 1A: Mount the clamp to the rod and install it to the desk.
- Step 1B: Mount the grommet to the rod and install it through the desk.
- Step 2: Remove the collar and cable clip from the rod.
- Step 3: Install the articulated arm and place the collar and cable clip back on the rod.
- Step 4: Install the keyboard holder to the bracket.
- Step 5: Install the monitor by screwing it onto the VESA plate.
- Step 6: Attach the arm to the rod and place the decorative cover.
- Step 7: Adjust the height by tightening the screws.
- Step 8: Fold the dustcatcher for storing cables.
- Step 9: Adjust the torque for secure positioning.
Please note that some parts may not be included with the product and may need to be purchased separately.
DIMENSION
PARTS
Monitor desk mount
-
STEP 1 A Clamp
Mount the clamp to the rod and install to the desk -
STEP 1 B Grommet
Mount the grommet to the rod and install through the desk -
STEP 2
Remove the collar and cable clip from the rod -
STEP 3
Install the articulated arm and place the collar and cable clip back on the rod -
STEP 4
Install the keyboard holder to the bracket -
STEP 5
Install the monitor -
STEP 6
Attach the arm to the rod and place the decorative co -
STEP 7
Adjust the height and tighten the screw -
STEP 8
Route the cable(s) through the cable clips -
STEP 9
Loosen or tighten the adjustment knob if necessary
-
STEP 10
Adjust the torque
-
STEP 11
Adjust the mount to the desired position
CAUTION
-
To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference
-
The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
-
The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.
-
It is recommended that the mount be installed by qualified personnel only.
-
At least two persons are needed to install or remove the product to avoid hazard of falling objects.
-
Please carefully inspect the area where the mount is to be installed:
– Avoid places that are subject to high temperatures, humidity or contact with water.
– Do not install the product near air conditioning vents or areas with excess dust and fumes.
– Only install on vertical walls and avoid slanted surfaces.
– Do not install in places subject to any shock or vibration.
– Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel. -
Maintain sufficient space around the display to ensure adequate ventilation.
-
To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
-
The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shock.
-
Do not modify any accessories or use broken parts. Contact your dealer with any questions.
-
Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
-
Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
-
Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
-
Please consult the English language manual for any dispute on conditions.