XTU W10 WIFI TRAIL CAMERA User Manual

XTU W10 WIFI TRAIL CAMERA User Manual

Customer Service Contact: [email protected]

FUNCTION INTRODUCTION

Thank you for buying our XTU hunting camera. This product is a dedicated high- definition digital camera that can record and observe wildlife. This camera has pyroelectric animal/human sensing technology. It can automatically capture high-resolution images and smooth video. This hunting camera will be in energy-saving mode when there is no detection of the animal (body), which can be for a long time. To operate the camera, please read this manual carefully before using it. The contents contained in this manual refer to the latest information at the time the manual was written. Due to technical development and production batches, it may be slightly different from your actual use. Please refer to the actual product functions.

INSTRUCTIONS FOR USE

• Before using this product, please find the battery container and install eight 1.5VAA batteries, make sure the battery polarity is correct.

• When using a power adapter, please find the DC port at the bottom of the camera and plug it in at the end of the power adapter to supply power. (Note: Use the DC 6.0V/2A adapter.)

• When using a newly purchased memory card for the first time,
  make sure to format the memory card before using it.

• This camera must use C10 or higher grade high-speed TF card.

The usage of the memory card is as follo w:

• According to the instruction next to the memory card slot (chipset downward), push the TF card into the slot until the card is fully inserted.
• To remove the TF card, gently press the end of the memory card inward, and the memory card will pop out.
• If repeated or improper use, the memory card will reduce its performance or may damage the recorded data. You need to buy a new memory card.

NOTE:
The memory card will become hot after long-term use, which is normal.

APPEARANCE

BUTTON FUNCTION AND INDICATOR

SYSTEM SETTINGS

Power on and off /System settings

• After you put the battery in, push the mode from “OFF” to “SETUP” to start up, and you can set the function.
• Press the MENU button to set the system menu settings, the LEFT and RIGHT buttons to switch in various modes, the UP and DOWN buttons to enter the menu function settings. Press the MENU button again to return to the previous menu or exit to the preview interface as pictured:

• Press the UP or DOWN button to switch between photo and video mode.
• Switch it to the ON position for monitoring mode: when it is set to the ON position in each mode of taking a photograph, video, video+photograph, the output of each function will be executed.
• Switch to OFF to shut down the state, the LCD can not display any output.

Mode
The camera has three modes: Photo, Video, Photo + Video

• Photo:
  Select the image size settings, which include: 30M, 24MP, 20MP, 16MP, 12MP, 8MP, SMP, 3MP, 2MP. The larger the size, the higher the image resolution is, the fewer photos can be stored by the memory card, and vice versa. This is available on the Hlmage SizeH Setting interface.

• Video:
  Select the video resolution Settings, which include: 4K P30, 2K P30, 1296 P30, 1080 P30, 720 P30, 480 P30, 360 P30. The higher the resolution, the higher the definition, and the shorter the video time that the memory card can store, and vice versa.

This is available on the “Resolution” Setting interface.

• Photo + video:
  In the ON mode, the camera takes pictures and then records.

NOTE:
when the camera is working on SETUP mode and hasn’t been operated for more than a certain period of time, it will automatically shut down in order to save energy. The user can click any button to open the screen to restore the display.

PIR Interval

• Set the PIR interval. When you choose different modes, the set time period is different.
• Photo: PIR interval setting time (between 5 seconds and 60 minutes)
• Video and photo+ video: PIR interval setting time (between 10 seconds and 60 minutes) During the selected time interval, the camera will not record any photos or videos, which can prevent the memory card from saving too many files and occupying memory capacity.

PIR Sensitivity
Set the sensitivity of the main sensor.

• When the indoor environment is very small, “Low” shall be selected.
• When the outdoor environment is normal, “Medium” shall be selected.
• When the external environment has a great impact on the shooting, “High” shall be selected.

IR LED

• Option: Auto, Economy, OFF
• Auto: If it is shooting night environment, it will automatically adjust the light brightness reasonably according to the current battery power usage.
• Economy: As long as the IR LED light is turned on, the light will be in a weaker brightness to make the battery longer;
• OFF: When it is turned off, the IR light will not be turned on when the light is dark or completely black.

NOTE:
It is recommended to use the “Auto” option to automatically adjust the brightness of the IR LED light according to the battery power status.

Time Lapse
Set the time lapse of the camera. For example, to observe the flowering process of plants, using this function and setting the interval between each shooting, you can record the whole process of flowering. When choosing Time Lapse, press the noK” button to open this menu. Selecting “ON” will pop up an Hours/Minutes/Sec­onds window to set. (When this function is on, the main/secondary sensor does not work.)

Monitoring Period
Set camera time to work, select “Monitoring Period”, then press “OK” to select “ON”, and you can set the start time and end time of the camera. After setting up, the camera will only work within the set time every day, and the other time will be in standby state.

(When this function is on, the main/secondary sensor does not work.)

Side PIR Setup
The induction is wider when both sides of PIR is ON (for pre-opening). When OFF, two sides of the induction do not start.

Image Size
Select the image size settings, which include: 30M, 24MP, 20MP, 16MP, 12MP, BMP, 5MP, 3MP, 2MP. The larger the size, the higher the image resolution is, the fewer photos can be stored by the memory card, and vice versa.

Picture No
Burst Photo option: 1-10, meaning 1, 2, 3 … 10 continuous photo-taking functions can be selected.

Shutter speed
Shutter speed option: 1/15, 1/20, 1/30. The night vision is different in brightness.

Resolution
Select the video resolution Settings, which include: 4K P30,
2K P30, 1296 P30, 1080 P30, 720 P30, 480 P30, 360 P30. The higher the resolution, the higher the definition, and the shorter the video time that the memory card can store, and vice versa.

Video Length
Set the video length (5-180 seconds optional). The longer you choose, the longer the video recording time. The system presets the video length to 5 seconds.

Record Audio
Option: “ON” or “OFF”. When it is turned on, there is sound in the recorded video; when it is turned off, there is no sound in the recorded video.

Date/Time
Time & Date: Adjust the corresponding time and date according to the local time, then press UP I DOWN to modify the size of numerical value, press the LEFT/ RIGHT button to confirm the current value and enter the next setting option. In the year / month / day format: press the UP/ DOWN button to select the format (YY I MM/DD, MM/DD/YY, DD/MM/YY). After setting, press OK/MENU to return to the previous menu.

Time Format
Option: 12 or 24 hour settings

Date Stamp
When this function is turned on, the captured file has watermarks such as time/date/temperature. When this function is turned off, there is no watermark display.

Camera Name
The camera name can be set, and it will be displayed in the watermark of the video and picture taken.

Password Setting
To set the camera’s power-on password: Open the password setting. You can set the 4 digits plus letter combination (0-9 and AZ). If you forget the power-on password, use the universal password to unlock.

The unlock method is “1111”. At the same time, tum the mode button to SETUP mode, and the camera will be unlocked at this time

Bluetooth

• When ON (The Mode is “ON” or “SETUP”), mobile phone can search to find the Bluetooth.
• When OFF, no Bluetooth can be searched.

WIFI SSID
You can modify the WIFI SSID name. After the modification, the WIFI name will be presented, and the mobile phone can search this WIFI SSIDname.

WIFI Password
Set WIFI password. After setting is successful, enter this password when the mobile phone is connected to WIFI camera.

Auto WIFI Off
Set the camera to automatically turn off the WIFI time. You can choose 1 minute/ 2 minutes/ 3 minutes. When the camera is in monitoring or SETUP mode, after turning on the WIFI or after connecting to the WIFI and using the APP, the phone is disconnect­ed from the camera. After reaching the camera Default “automatical­ly tum off WI Fl” time, the camera will automatically exit WI Fl and automatically return to ON (monitoring) or SETUP mode

Beep Sound
Option: ON or OFF. Both keys and turn on/off are mute when OFF.

Language
This hunting camera supports multiple languages.

Format
Execute to format SD card. All data will be cleared after formatting.

Default Setting
All functions default to initial state when default setting.

PLAYBACK MODES

• Remove the hunting camera from the installed position, switch the button from “ON” to SETUP, press REPLAY button to enter the playback mode, press LEFT /RIGHT to view the videos and pictures. Press OK to stop/play, and press REPLAY button to return to preview menu. During the playback, press the UP button to fast forward playback 2 times, 4 times, 8 times; press the button to fast backward playback -2 times, -4 times, -8 times. If you do not want to play the current video during the playback, press the REPLAY button to exit the current playback.

• In the playback interface, press the MENU button to enter the Recovery Setting menu (delete/protect} as shown in the picture .

• Delete
  Select “Delete Current” to delete selected pictures or videos in the memory card of the camera. Select “Delete All” to delete all pictures or videos in the memory card of the camera.

• Protect
  Select “Lock Current” to prevent the currently set document from being accidentally deleted.  Select “Unlock Current” to remove current document protection. Select “Lock All” to prevent all documents in the memory card from being accidentally deleted.
  Select “Unlock All” to Unlock Multiple Document Protection.

TURN ON WIFI BY BLUETOOTH REMOTE

WIFI connect with APP

• Before using WIFI, please install the “Hunting 4K” APP on your mobile phone. For your Android device, please search ” Hunting 4K” in Google Play. To install on an IOS device, please search “Hunting 4K” in Apple Store and install.
• You can scan the QR code to download the “Hunting 4K” APP.

Video for Operation

Please scan below QR code to watch with your phone.

Running the “Hunting 4K” App in the device
Before running the app, please make sure the mode of camera is “ON”.

STEP 1 : Enter the “Hunting 4K” APP, click on TURN ON BLUETOOTH to automatically search for Bluetooth. {For IOS system, please first tum on the Bluetooth function in the setting page and then enter the “Hunting 4K” APP.)

STEP 2: Search for Bluetooth named CAMERA-****(8 x random generated code), click to pair once you find it. If you don’t find it, please search Again. Match and jump to the next step .

STEP 3: Select “Turn on WiFi”, the phone will automatically jump to the wifi connection interface. (IOS phones cannot directly enter the WIFI connection interface due to different systems. Please manually enter the WIFI connection page.) Search for “Hunting 4K” and enter the original password: 12345678. After successful connection, return to the APP and click”+” to use the camera.

Exit WIFI

• When finished with the APP, you can click “EXIT” on the APP preview interlace to turn off WIFI. The camera will enter into “ON” mode or “SETUP” mode.
• If you forget to turn off or exit WIFI or when the camera is disconnected from mobile phone, and reaches the camera default “auto shutdown wifi” time, the camera will exit WIFI automatically and return to “ON” mode or “SETUP” mode.

WORKING MODE DESCRIPTION

Calibrate the installation position of camera
In the “SETUP” mode, the best shooting angle and range of the camera can be adjusted.
During calibration, you can choose whether to use the side sensor for observation. The steps to calibrate the camera position are as follows:

• Tie the camera to a tree or an object 1-2 meter high, adjust the camera lens direction, and then slowly move the camera to the other side to monitor the motion track.
• If the side PIR indicator is on, it means that the side sensor has detected the moving object. If the main PIR indicator is on, it means that the main sensor has detected the moving object. In this way, the best position for installing the camera can be found.
• The indicator light will be on only when the sensor detects moving objects in the “SETUP” mode and the LED is off in the “ON” mode.
• Make sure that the camera will not be interfered unnecessarily when it is working, and avoid direct sunlight or near the branches.

Normal operation mode

In this mode, the camera is triggered to shot by the sensor; the camera enters monitoring mode when the switch is “ON”. After 5 seconds, the LED lights will turn off and the camera starts to operate independently and enter the standby mode. Once an animal enters the area detected by the side sensor, the camera will be activated and detect the motion track. If the animal continues to move to the main sensor detection area, the camera will take photos or record video automatically, If the animal leaves the area detected by the main sensor, the camera will tum off and return to standby mode.

Night mode

• At night, the infrared LED light will tum on automatically to provide necessary lighting for taking photos. The LED light illuminates with a range of about 3-20 meters. If the animals are too close to the camera, it may cause overexposure.
• In night mode, the picture or video is only black and white. When recording video for a long time, low voltage may have a big effect on the stability of the camera, so DO NOT record video at night when the power is low.

NOTE:
If the camera is used at night when the battery voltage is low, the current increases due to the infrared light. Low battery may have a big effect on the stability of the camera. The camera cannot take photos I video or take very dark images, but it does not affect the daytime photo or video.

IMAGE/ DATA OUTPUT

Connect to your computer to download photos/Videos. After the camera is connected to the computer and enters the removable disk mode, a removable disk will be added in the “My Computer” window. Taken photos or videos will be stored in the “DCIM\100MEDIA”directory on the removable disk. You can enter this directory to copy files to your computer hard disk.

NOTE:
To avoid data loss, do not disconnect the data cable during file downloading, and do not plug or unplug the memory card when connected.

SPECIFICATION

NOTE:
The product design specifications are formulated according to the latest information in the preparation of this manual and are subject to change without notice. Please refer to the actual camera.

CUSTOMER SUPPORT
[email protected]

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>