nVent LENTON RBS354715 Horizontal And Vertical Packing Owner’s Manual Product Information Product Usage Instructions
- January 8, 2024
- nVent LENTON
Table of Contents
- RBS354715 Horizontal And Vertical Packing
- Product Information
- Specifications
- Features
- Additional Product Details
- Diagrams
- Warning
- Contact Information
- Brands
- Disclaimer
- Product Usage Instructions
- Step 1: Preparation
- Step 2: Placement of Packing Materials
- Step 3: Molten Filler Material
- Step 4: Safety Precautions
- Step 5: Maintenance and Storage
- Frequently Asked Questions (FAQ)
- Q: What is the purpose of the packing materials?
- Q: Where can I find the detailed instructions and safety
- Q: How should I dispose of the molten filler material?
RBS354715 Horizontal And Vertical Packing
Product Information
Specifications
- Diameter: 13 mm
- Length: 381 mm
- Unit Weight: 0.010 kg
Features
The horizontal and vertical packing materials seal the gaps that
can exist between the sleeve and reinforcing steel bar. The packing
materials help ensure the molten filler material remains in the
sleeve until it solidifies. The product features include:
- Heat-resistant
- Pliable material forms to the reinforcing steel contours
- Helps prevent leaking of molten filler material
Additional Product Details
Prior to installation, please read and understand all of the
detailed instructions and safety notices provided in the nVent
LENTON Cadweld Rebar Splicing System Instruction Manual.
Diagrams
Warning
nVent products shall be installed and used only as indicated in
nVent’s product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and from
your nVent customer
service representative. Improper installation, misuse,
misapplication or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property
damage, serious bodily injury and death and/or void your
warranty.
Contact Information
For any inquiries or support, please contact the following:
- Europe Netherlands: +31 800-0200135
- France: +33 800 901 793
- Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Brands
Our powerful portfolio of brands:
- nVent.com
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
Disclaimer
All trademarks are the property of their respective owners.
nVent reserves the right to change specifications without
notice.
Product Usage Instructions
Step 1: Preparation
Prior to using the product, ensure that you have read and
understood all the instructions and safety notices provided in the
nVent LENTON Cadweld Rebar Splicing System Instruction Manual.
Step 2: Placement of Packing Materials
The horizontal and vertical packing materials are designed to
seal the gaps between the sleeve and reinforcing steel bar. Follow
these steps to place the packing materials:
-
Identify the gaps between the sleeve and reinforcing steel
bar. -
Cut the horizontal and vertical packing materials according to
the length required. -
Place the horizontal packing material over the gap
horizontally. -
Place the vertical packing material over the gap
vertically. -
Ensure that the packing materials form a tight seal and cover
the entire gap area.
Step 3: Molten Filler Material
The packing materials help ensure that the molten filler
material remains in the sleeve until it solidifies. Follow these
steps to use the molten filler material:
-
Prepare the molten filler material according to the
instructions provided. -
Pour the molten filler material into the sleeve, making sure it
fills the entire space. -
Allow the molten filler material to solidify completely before
proceeding with further installation or usage.
Step 4: Safety Precautions
During the usage of this product, it is important to prioritize
safety. Follow these safety precautions:
-
Use appropriate personal protective equipment (PPE) such as
gloves and safety glasses. -
Work in a well-ventilated area to avoid inhaling any fumes or
gases. -
Avoid direct contact with the molten filler material to prevent
burns or injuries. -
Follow all applicable safety guidelines and regulations.
Step 5: Maintenance and Storage
After usage, it is important to properly maintain and store the
product for future use. Follow these guidelines:
-
Clean any residue or debris from the packing materials and
sleeve. -
Store the product in a dry and secure location away from direct
sunlight or extreme temperatures.
Frequently Asked Questions (FAQ)
Q: What is the purpose of the packing materials?
A: The packing materials are designed to seal the gaps between
the sleeve and reinforcing steel bar, ensuring that the molten
filler material remains in the sleeve until it solidifies.
Q: Where can I find the detailed instructions and safety
notices?
A: The detailed instructions and safety notices can be found in
the nVent LENTON Cadweld Rebar Splicing System Instruction
Manual.
Q: How should I dispose of the molten filler material?
A: Follow local regulations and guidelines for the proper
disposal of the molten filler material.
HORIZONTAL AND VERTICAL PACKING, 381 MM
CATALOG NUMBER
RBS354715
The horizontal and vertical packing materials seal the gaps that can exist between the sleeve and reinforcing steel bar. The packing materials help ensure the molten filler material remains in the sleeve until it solidifies.
FEATURES
Heat-resistant Pliable material forms to the reinforcing steel contours Helps
prevent leaking of molten filler material
PRODUCT ATTRIBUTES
Diameter: 13 mm Length: 381 mm Unit Weight: 0.010 kg
ADDITIONAL PRODUCT DETAILS
Prior to installation, please read and understand all of the detailed
instructions and safety notices provided in the nVent LENTON Cadweld Rebar
Splicing System Instruction Manual.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent customer service
representative. Improper installation, misuse, misapplication or other failure
to completely follow nVent’s instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your
warranty.
North America +1.800.753.9221 Option 1 Customer Care Option 2 Technical Support
Europe Netherlands: +31 800-0200135 France: +33 800 901 793
Europe Germany: 800 1890272 Other Countries: +31 13 5835404
APAC Shanghai: + 86 21 2412 1618/19 Sydney: +61 2 9751 8500
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of
2
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent