nVent CADDY BC-PSM Conduit to Beam Clamp Owner’s Manual

: June 16, 2024
: nVent Caddy

Table of Contents

nVent CADDY BC-PSM Conduit to Beam Clamp
Product Information
Product Usage Instructions
FEATURES
SPECIFICATIONS
DIAGRAMS
WARNING
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nVent CADDY BC-PSM Conduit to Beam Clamp

Product Information

Specifications

Catalog Number| EMT Conduit Size| Flange Thickness (FT)| Torque (TQ)| Ultimate Static Load (F)
---|---|---|---|---
BC8PSM| 1/2| 1/2 Max| 2.21 ft-lb| 15 lb
BC12PSM| 3/4| 1/2 Max| 2.21 ft lb| 15 lb
BC16PSM| 1| 1/2 Max| 2.21 ft lb| 15 lb

Features

Easy installation to beam flanges
Eliminates offset bending conduit

Warning
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death, and/or void your warranty.

Contact Information

Europe Netherlands: +31 800-0200135
France: +33 800 901 793
Germany: 800 1890272
Other Countries: +31 13 5835404
APAC Shanghai: +86 21 2412 1618/19
Sydney: +61 2 9751 8500

Brands
Our powerful portfolio of brands:

nVent.com
CADDY
ERICO
HOFFMAN
RAYCHEM
SCHROFF
TRACER

Note
nVent reserves the right to change specifications without notice.

Product Usage Instructions

Installation

Ensure that the beam flanges are clean and free from debris.
Select the appropriate BC-PSM Conduit to Beam Clamp based on the EMT conduit size and flange thickness.
Place the clamp over the beam flanges, aligning the conduit opening with the desired position.
Tighten the screws on the clamp using a torque wrench, applying a torque of 2.21 ft-lb.
Verify that the clamp is securely fastened to the beam flanges.

Conduit Installation

Insert the EMT conduit into the conduit opening of the BC-PSM Conduit to the Beam Clamp.
Ensure that the conduit is fully inserted and aligned with the desired position.
Secure the conduit in place using appropriate fittings and fasteners.

Maintenance
Regularly inspect the BC-PSM Conduit to Beam Clamp for any signs of damage, wear, or loosening. If any issues are identified, tighten or replace the clamp as necessary.

Removal

Disconnect and remove any conduit connected to the BC-PSM Conduit to the Beam Clamp.
Loosen and remove the screws on the clamp using a torque wrench.
Remove the clamp from the beam flanges.

Cleaning
Use a clean cloth or brush to remove any dirt or debris from the BC-PSM Conduit to Beam Clamp. Avoid using harsh chemicals or abrasive materials that may damage the clamp’s finish.

FAQ (Frequently Asked Questions)

Q: Can I use the BC-PSM Conduit to Beam Clamp with different types of conduit?
A: The BC-PSM Conduit to Beam Clamp is designed specifically for use with EMT (Electrical Metallic Tubing) conduit.
Q: What is the maximum flange thickness that the BC-PSM Conduit to Beam Clamp can accommodate?
A: The BC-PSM Conduit to Beam Clamp can accommodate a maximum flange thickness of 1/2 inch.
Q: What is the torque specification for tightening the screws on the BC-PSM Conduit to Beam Clamp?
A: The recommended torque for tightening the screws on the BC-PSM Conduit to Beam Clamp is 2.21 ft-lb.

FEATURES

Easy installation to beam flanges
Eliminates offset bending conduit

SPECIFICATIONS

Finish: nVent CADDY Armour
Material: Spring Steel

Catalog Number| EMT Conduit Size| Flange Thickness(FT)| Torque(TQ)| Ultimate Static Load(F)
---|---|---|---|---
BC8PSM| 1/2″| 1/2″ Max| 2.21 ft- lb| 15 lb
BC12PSM| 3/4″| 1/2″ Max| | 15 lb
BC16PSM| 1″| 1/2″ Max| 2.21 ft- lb| 15 lb

DIAGRAMS

WARNING

nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.