CACTUS CAST-LB540 Self Cleaning Cat Litter Box User Manual
- June 16, 2024
- CACTUS
Table of Contents
- CACTUS CAST-LB540 Self Cleaning Cat Litter Box
- Product Information
- Introduction
- Equipment list
- Assemble your device
- Key operation
- Infrared monitoring
- Clean and eliminate odors
- The phenomenon of bottom sticking
- Web links and APP
- Parameters
- FCC STATEMENT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CACTUS CAST-LB540 Self Cleaning Cat Litter Box
Product Information
Specifications
- Suitable for cats weighing between 2.0 to 25 pounds
- Indoor use only
- Power adapter: DC12V/1.5A
- Compatible cat litter types: tofu, clay, clumping clay, and mix (no crystal litter)
Frequently Asked Questions
- What types of cat litter are compatible with this device?
- This device can use tofu litter, clay litter, clumping clay litter, and mix litter. Crystal litter is not compatible.
- Can I empty all the remaining cat litter in the drum?
- Yes, you can empty all the remaining cat litter in the drum into the drawer. Press the empty cat litter button first, then press the start button. The drum will roll forward 4 cycles to empty the cat litter into the drawer.
Introduction
Thank you for buying this Self-cleaning cat litter box, the following are the instructions for using this device, please read it and start using.
This device is suitable for cats weighing between 2.0 to 25 pounds.
Cats weighing less than 2.0 pounds will not be identified and may cause danger
to your kitten.
Cats weighing more than 25 pounds can be inconvenient or reluctant to use.
If your cat hasn’t used the self-cleaning cat litter box previously, they may
be less willing to use it at first.
Put the cat in the drum of the self-cleaning cat litter box from time to time,
and two days later, maybe the cat will use it.
Equipment list
- Auto-clean cat litter box device ╳1
- Cat litter control pad ╳1
- Cat litter clearing frame ╳1
- Power adapter ╳1
- Garbage bags ╳1
- Cleaning Kits ╳1
- Use manual ╳1
- Quick use guide ╳1
Assemble your device
The device, cat litter control pad are in the packing box. Power adapter, garbage bags, dustpan and broom, shovel, brush, hooks, use manual, quick use guide are packaged and placed inside the device. Before use the device, remove the cat litter clearing frame and keep it properly.
This device should be used indoors to avoid direct sunlight and high temperature, high humidity environment. The device must be placed on a solid, horizontal ground. The ground should not be too soft to avoid deviation in the gravity sensor readings. Use the power adapter of the original DC12V/1.5A, or it may damage the device or cause the device will not work properly.
After set the device according to the figure above, plug in the power adapter,
connect the power supply. Press key first, then press key, the device drum
will roll, and smooth the cat litter.
If you connect the power supply first, and then add cat litter into the drum,
the image and cat weight data will be displayed on the device panel. But you
can still press key and key to level cat litter.
Congratulations
Congratulations, your cat can use this self-cleaning cat litter box.
When your cat enters the drum of the device to excretion, the image and cat weight data will be displayed on the device panel. The device will clean the excrement automatically, after the cat excretion finished and comes out, which is very intelligent and convenient.
About cat litter
- Cat litter that can be used in this device includes tofu, clay, clumping clay and mix.
Note
- The length of tofu litter should not exceed 8mm.
- This device cannot use crystal litter.
Key operation
There are 6 keys on the device panel to facilitate the necessary operation.
Empty cat litter: Empty all the remaining cat litter in the drum into the
drawer. Press key first, then press key. The drum will roll forward 4 cycles
to empty the cat litter into the drawer.
Note: Before emptying operations, make sure the following two things are completed. 1, Replace a new garbage bag in case the drawer can not hold all the remaining cat litter in the drum. 2, Install the cat litter clearing frame on the entrance/exit in place.
Level cat litter: Levelling the cat litter in the drum. Press key first,
then press key. The drum will roll back and forth once to levelling the cat
litter.
Clean the excrement: Press key first, then press key. The drum will roll
back and forth to clean the excrement into the drawer.
Deodorization: Press the key on/off deodorization. The deodorization will
turn off after 15 minutes when you turn it.
Infrared monitoring: Monitor the infrared rays at the entrance/exit
whether are obscured. Long press the key for 3 seconds can on/off the infrared
monitor.
Task cancellation: Performing emptying, or cleaning task, long press the
key for 3 seconds can cancel them, and then level the cat litter.
Note: When the infrared rays are obscured, can not cancel these tasks.
Connect your phone: On the “Idle” mode, long press the key for 5 seconds,
the device can connect your phone through WIFI.
Infrared monitoring
- The device has an infrared monitor at the entrance/exit of the cat, when the cat is in/out which can be detected.
- The clean task will be suspended if the infrared is obscured during clean to protect the cat.
- Please keep the infrared monitor panel clean during use to avoid monitoring errors
- This device provides the function to turn off the infrared monitor. The clean task will not be suspended during the infrared is obscured when the infrared monitor is turned off.
- Long press the key for 3 seconds can on/off the infrared monitor. The display panel will display logo , when the infrared detector is turned off.
Deodorization
- The deodorization will on for 15 minutes automatically when the device performs emptying, levelling, or cleaning.
- You can press the key on/off deodorization (the deodorization function, which lasts for 15 minutes after turn on, is then automatically turned off). The logo will be displayed when the function on.
- In addition, deodorization schedule rules can be set on the APP to get better results.
Clean and eliminate odors
Replace the garbage bag
- The storage drawer capacity is 9.5 liters, with one cat can use for 20 days and two cats for 10 days.
- In order to reduce the odor, it is recommended that the garbage bag be replaced for not more than 3 days when conditions permit!
- In the idle status, pull out the drawer, remove the lid, and carry out the garbage bag which with feces. Replace a new garbage bag, press the lid, and push the drawer into the device.
Drawer clean
- After using for a period of time, you need to clean the drawer with water, in order to eliminate the odor on the drawer completely. You’d better do this operation once every half a month.
Note: After washing the drawer, place it in a ventilated place and dry it thoroughly before using it again.
Empty cat litter and Drum cleaning
- Even if the device can clean the cat’s excrement into the drawer in time, the device will still leave a large odor after a period of use.
- To eliminate these odors, you need to clean the drum with water. We recommend that cleaning drum once in two weeks for one cat and once in a week for multiple cats.
Empty cat litter
Before cleaning the drum with water, you need to empty the remaining cat litter in the drum. Emptying cat litter procedure is performed as follows.
- Replace a new garbage bag in case the bin can’t hold all the cat litter in the drum
- Press key first, then press key. The drum will roll forward 4 cycles to empty the cat litter into the drawer.
- Note: if the emptying process is stopped midway, please check whether the clearing frame is installed in place.
Clean drum
Note: After washing the drum, place it in a ventilated place and dry it thoroughly before using it again.
- Align the circular silicone marks on the drum and on the gear. Follow the arrow 1 and then arrow 2 direction until the drum is secured.
The phenomenon of bottom sticking
The mixture of urine and cat litter was stuck to the bottom of the drum is a very common phenomenon. We reduce the sticking phenomenon by a special drum structure design, and increasing the cat litter capacity (8 L). But we still haven’t stopped this phenomenon completely.
Tips:
- Tofu litter is not very easy to stick to the bottom (But the tofu litter with a length must no more than 8 mm), clumping clay litter is most easily stuck.
- Add cat litter near the max line in time can greatly reduce sticking phenomenon also.
Abnormal situation: the drawer flip cover can’t be opened
- When the icon displayed on the panel, it indicates that the drawer flip cover cannot be opened in time when cleaning. This is most likely some feces pressed on the cover so that it does not open properly.
- Please refer to the two figures below to clean up the feces pressed on the flip cover.
- After completing the above operation, install the cover plate and screw on the screw.
Web links and APP
Install the APP and link the device to your mobile phone to enjoy more personalized features, giving you more information about your cat’s living habits and health. At the same time, you can also share this information with your friends.
Note: This device supports the 2.4G and 5G WIFI networks
- First, scan the QR code on the right, follow the prompts, install the APP software to your phone. Second, on the “Idle” mode, long press the key for 5 seconds, until the “dilililili” beep is issued.
- Open the Bluetooth function of the mobile phone, enter the app home page, and enter “Add Device”
Parameters
- Name: Self-cleaning cat litter box
- Product size: 720mm ╳ 560mm ╳ 585mm
- Package size: 780mm ╳ 590mm ╳ 620mm
- Gross weight: about 20Kg
- Material: PP, ABS
- Power supply: Input: AC100-240V 50/60Hz
- Output: DC12V/1.5A
- Power: 12W
FCC STATEMENT
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>