SEALEY APICCOMBOH2 900mm Industrial Cabinet 3 Shelf User Manual

Instructions for
Industrial cabinet 3 shelf 900mm
Model no: apiccomboh2

APICCOMBOH2 900mm Industrial Cabinet 3 Shelf

Thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Refer to instruction manual

SAFETY

ˆ WarninG! ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.
  locate cabinet in a suitable work area.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
ˆ Warning! use cabinet on level and solid ground, preferably concrete.
Keep the cabinet clean and tidy in accordance with good workshop practice.
Keep children and unauthorised persons away from the work area.
  do not use the cabinet for any purpose other than that for which it is designed.
do not use the cabinet outdoors.
do not place the cabinet in a damp or wet location or an area where there is condensation.
do not clean the cabinet with any solvents which may damage the surfaces or the protective coating.
do not move the cabinet when there are items placed inside.
do not overload the cabinet.

INTRODUCTION

Industrial quality, double door, freestanding cabinets with three shelves. easily assembled with minimal tool use. durable scuff resistant, adjustable shelving each with a weight limit of 150kg. Drawers run on heavy duty ball bearing slides each with a weight limit of 75kg, fitted with safety locking catches preventing inadvertant opening.reinforced steel doors with zinc plated locking bars, provide 3 point locking.
Supplied with two coded keys. Ideal for home, office, garage or workshop use.

SPECIFICATION

Model no: ……………………………..apiccomboh2
Width x depth x Height
Overall size: ……………………… 900 x 450 x 900mm
Shelf size (x4): ……………………. 840 x 380 x 30mm
Internal cabinet overall size:… 850 x 420 x 810mm

CABINET CONTENTS

Unpack the contents of the boxes and check against the parts lists/diagrams. if there are any parts missing, contact your local sealey dealer.

CABINET ASSEMBLY

5.1. Assemble the cabinet following the numbered sequence below, referencing the parts list and diagram overleaf. use a tresle table or a workbench if required.nch if required. ter

SHELVES CONTENTS/ASSEMBLY

Environmental protection
**** Recycle unwanted materials instead of disposing of them as waste. all tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable) into approved containers and dispose of the product and the fluids according to local regulations.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

Sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park, Bury st. edmunds, suffolk.
iP32 7Ar
01284 757500
01284 703534
www.sealey.co.uk
sales@sealey.co.uk

© Jack sealey limited

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>