DBGULP-STAND Carbatec Universal Dust Hood Stand Instructions
- June 12, 2024
- carbatec
Table of Contents
UNIVERSAL DUST HOOD STAND
DBGULP-STAND
INSTRUCTIONS
What’s in the box:
A. Height adjustable post and pivot bracket
B. Hood/Hose support
C. Legs × 3
D. Fastener pack
E. Knobs × 2
ASSEMBLY
- Attach the three legs to the post, with the six short bolts, nuts and washers. Fig.1
- Ensure these are attached with the three rubber feet facing down. Fig. 2
- Attach the pivot bracket to the top of the height adjustable post, with the two bolts and washers. Fig. 3
- Attach the hood/hose support bracket to the pivot bracket with two dome head carriage bolts and the two plastic knobs. Fig. 4 & Fig. 5
|
---|--- - Attach your selected dust hood and hose with the supplied clamp, or any standard 4” hose clamp. Fig. 6
Carbatec Pty Ltd
E info@carbatec.com.au
AU 1800 658 111 NZ 0800 444 329
128 Ingleston Road, Wakerley, Queensland Australia 4154
ABN 84 010 706 242
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>