Singing Machine SMC2068 Cerating Joy Through Music Instruction Manual

Singing Machine SMC2068 Cerating Joy Through Music

Warnings

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

DANGEROUS VOLTAGE : The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION : The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product.

DRIPPING WARNING : This product shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the product.
VENTILATION WARNING : The normal ventilation of the product shall not be impeded for intended use.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

FCC Statement

FCC WARNING : This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The rating information is located at the bottom of the unit.

WARNING : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Important Safety Information

1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the Manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place objects filled with water, such as a vase, on the apparatus.
16. The AC mains plug is used as the power disconnect device and it should remain readily accessible and operable during intended use. In order to completely disconnect the apparatus from power, the mains plug should be completely removed from the AC outlet socket.
17. CAUTION : To reduce the risk of fire or explosion, do not expose batteries to excessive heat such as sunshine, fire or other heat sources.

Included

Please make sure that the following items are included.

• Main Unit
  

• Wireless Microphone x2

• Extendable Mic stand
  

• AC Adapter

• Manual

• Cradle with mic holders (Detachable)

Assembly

Important : Do not use this device with other microphone stands. Lift the unit only from the bottom base. Exercise caution when placing larger devices in the holder.

1. Lift the rubber cover on the top of the main unit and insert the mic stand. Rotate it clockwise to tighten.
2. Untighten the cradle pole adjustment cap and pull up on the cradle pole. Retighten the cap to secure it.
3. Untighten the cradle pole cap.
4. Insert the cradle with mic holders into the mic stand and rotate to tighten.
5. Untighten the height adjustment cap to set a suitable height. Retighten the cap to secure it.
   
   

Location of Controls

1. USB slot

2. (Voice effects up) button

3. Music Volume/Mic Volume control

4. Rubber Cover

5. (Navigation Up) button

6. BACK Button

7. (Casting) button

8.  USB button

9. Power indicator

10. (On/Standby/Lights button)

11. AUX IN button

12. (Back skip/ Navigation left) button

13. Display

14. (Navigation Down) button

15. (Next Skip/Navigation) button

16. (Voice effects down) button

17. (Play/Pause/Stop) button

18. RECORD button

19. Record indicator

20. (Bluetooth/Vocals off) button

21. Bluetooth indicator
    

22. Cradle

23. Mic Holders

24. Cradle pole adjustment cap

25. Height adjustment cap

26. Speaker

27. Handle

28. Mic Holders

29. HDMI Jack

30. Aux In Jack

31. Reset hole

32. Mic 1 jack

33. Mic 2 jack

34. DC In jack

35. (Mic Volume +) button

36. (Mic Volume -) button

37. Wireless mic power indicator

38. Wireless mic power button

39. Battery indicator

40. Wi-Fi indicator

41. Display

42. Mic 1 indicator

43. Mic 2 indicator

• If this device doesn’t work, you can reset the device using the pin.
  

Rechargeable Battery

This unit has a built-in rechargeable battery pack for cordless operation. The battery should not be serviced or replaced by the user.
To maximize battery life, it is recommended to charge the unit once a month. When the battery indicator on the display flashes slowly, follow these steps to recharge:

1. Plug the AC power cord into a 120V, 60Hz outlet and connect to the unit.
2. Allow the unit to charge for approximately 2 hours for a full charge. The battery indicator will turn off when fully charged.
3. Disconnect the AC cord. The fully charged unit can be used for approximately 4 hours, depending on the selected functions.
   

ATTENTION : The sound volume will adjust automatically when the battery is not full.
Recycling and Disposal Information:

• Do not dispose of electronic devices or any of their components. (especially batteries and LCD displays) in your municipal trash collection.
• Consult your local waste management authority or a recycling organization like Earth911. com to find an electronics recycling facility in your area.

CAUTION : Rechargeable batteries must be recycled or disposed of properly.

Energy Saving (Auto Power System APS)

If there is no audio playback, the unit will automatically enter standby mode after 20 minutes.
To resume using the unit, press the  ****button.
APS is designed to save energy.

Connections

Charging the unit

Insert the AC power cord into a conveniently located AC outlet having 120V AC, 60Hz.

NOTES:

• Connect all cables before plugging the AC adapter into a power outlet.
• The provided AC adapter is exclusively for charging the built-in rechargeable battery. Do not use it with other devices.

Connecting the Unit to a TV

To output casting video and audio to your TV, follow these steps:

1. Plug the HDMI cable (not included) into the HDMI Jack on the back of the unit.
2. Connect the other end of the HDMI cable to the HDMI input on your TV.
   

IMPORTANT NOTES:

• This unit can be used with or without a TV, but it is highly recommended to use a TV to access all features.
• Consult your TV’s User Guide for additional information.
• Please note that audio and mic input cannot be output to your TV.

To connect the wireless microphone(s), follow these steps:

1. Press the button to power on the unit.
2. Press the 1 button on the wireless microphone to turn it on. The Mic indicator 1 or 2 will blink and become solid when connected.
   

NOTES:

• The wireless microphone has a working distance of up to 30 feet/10 meters in an open space.
• If there is no audio input to the unit for 20 minutes, the wireless microphone connection will automatically turn off. To reactivate the connection, turn on the unit and press the button.

To change the wireless microphone’s battery:

1. Unscrew the bottom of the wireless microphone.
2. Replace the existing batteries with 2 x “AA” size/LR6 batteries.
3. Screw the bottom of the wireless microphone back on securely.
   

BATTERY PRECAUTIONS

The precautions below should be followed when using batteries in this device:

1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow the battery manufacturer’s directions.)
6. Rechargeable batteries are to be removed from the product before being charged.
7. Rechargeable batteries are only to be charged under adult supervision.
8. Exhausted batteries are to be removed from the product.
9. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

To connect optional wired microphones:

1. Plug the wired microphone (not included) into the Mic jack marked  1 or 2 (depending on preference).
2. The corresponding mic indicator light will blink to indicate a successful connection.
   

Lights Mode

There are 3 built-in light modes. Repeatedly press the button to switch between lighting effects.

Cradle

Connect unit to Wi-Fi using your mobile device:

1. Press the button to turn the unit on and ensure to connect it to a TV via HDMI.

2. USE YOUR MOBILE DEVICE TO COMPLETE THIS STEP:
   
   a Press the button on your unit or navigate to “SINGCAST OPEN” on your TV screen in the main menu. “CAST” will display on the screen. If this unit has not been connected to your Wi-Fi network a step 1 QR code will pop up on the screen.
   b Scan the step 1 QR code that appears on the screen using your mobile device and wait for it to connect.
   c Once your mobile device is connected to the unit , a step 2 QR code will appear on the screen.
   d Scan the step 2 QR code with your mobile device and wait for a Wi-Fi list to pop up.
   e On your mobile device, select your home Wi-Fi from the list and enter the Wi-Fi password.
   f If the unit fails to connect, double check the password and Wi-Fi frequency, then repeat the steps.
   
   
   NOTES:

   • Ensure the mobile device and unit are connected to the same Wi-Fi network.
   • Connection issues may arise with WPA3 security settings. If using WPA3, consider switching to WPA2 or lower, or seek further assistance from us.

3. After successful Wi-Fi connection, the on-screen display will show “connected” Download the Singing Machine Karaoke App to enjoy your favorite karaoke music and project HD karaoke videos on your TV.

4. The unit automatically pairs with a previously connected Wi-Fi network. To connect to a different WiFi network, access the main menu, go to SETTINGS > Wi-Fi settings > DISCONNECT to disconnect from the current network and connect to a new one.
   

5. Use the button to return to the previous screen, or press and hold to access the main menu.
   

SETTINGS

1. Press and hold the button for a quick return to the main menu.
   Navigate using the and buttons to select the SETTINGS icon, indicated by “set up” on-screen.
   

2. Choose WiFi settings to connect or disconnect from the Wi-Fi network and check the signal level.

3. Choose Software update to update the unit’s software.

4. Choose Software info to view the latest software version and serial number of the unit.

5. Select Factory setting to delete all stored data in the unit.
   

Operation

Using Sing Cast Casting

1. Connect the unit to a TV as previously described. Power on the unit by pressing the button. The power indicator will solidly light up.
   

2. In the main menu shown on the TV, select SINGCAST using the , , , navigation buttons OR press the button in the unit. The word “CAST” will be displayed on the screen.

3. Download the Singing Machine Karaoke App to access a wide selection of HD karaoke videos to project from your mobile device to your TV (make sure your mobile device and the unit are connected to the same WiFi network).

4. Register your account and choose your favorite song. Press the “ “ icon and select “SingCast_Cube” to cast the karaoke video to your TV.
   

5. Turn on the microphone by pressing the button.
   

6. Adjust the volume using the MUSIC VOLUME/MIC VOLUME control until it’s comfortable.

7. Use the MUSIC VOLUME/MIC VOLUME control on the unit or the or – buttons on the mic to adjust the volume of the microphone.

8. Select a voice effect by pressing the or button.

9. To record your singing performance along with the music, press the REC button. The record indicator will light up. Press the REC button again to stop recording.
   
   NOTES:

   • A USB drive (not included) must be inserted into the USB slot for recording.
   • The audio file will be saved on the USB drive.

10. To turn off the unit, press and hold the button.

Instructions for using the unit with a Bluetooth device:

1. Begin by connecting the unit as previously described. Once connected, press the button to turn the unit on.

2. To navigate the menu, press the button or use the , , , Navigation buttons to select “BLUETOOTH OPEN” in the menu casted on the TV. When successfully selected, “BT” will light up on the display, and the indicator will flash.
   
   

3. The unit will automatically search and pair with a previously paired Bluetooth device, if any. If there are no previously paired devices, follow the next step to establish a connection.
   NOTE : If you want to pair a new device while one is already connected, you can press and hold the button to disconnect the currently paired device.

4. On your device, access the settings and turn on the Bluetooth option to initiate a search for discoverable devices with a Bluetooth signal. From the device results in the Bluetooth menu, select “SINGING MACHINE”
   NOTE : For detailed instructions specific to your Bluetooth device, refer to its user manual.

5. After successful pairing, the Bluetooth indicator light will remain solid.
   NOTES:

   • If your Bluetooth device prompts for a passcode during pairing, enter “0000” to connect.
   • Some Bluetooth devices may require selecting your Bluetooth device as “Use as Audio Device” or a similar option after pairing is completed.
   • If the connection is lost after successful pairing, ensure the distance between the speaker and the Bluetooth-enabled device does not exceed 30 feet/10 meters.

6. Start music playback either by controlling your Bluetooth device or by pressing the button on this unit (ensure the music app is open). Press the button again during playback to pause the song.

7. djust the volume to your desired level using the MUSIC VOLUME/ MIC VOLUME control on this unit and the volume control on your Bluetooth device.
   NOTE : The music played through Bluetooth and your singing performance will only be heard through the unit’s speakers.
   

8. Turn on the microphone by pressing the button on the microphone.

9. Use the MUSIC VOLUME/MIC VOLUME control on the unit or the or buttons on the mic to adjust the volume of the microphone.
   Increasing this control will amplify the microphone volume.
   

10. RECORD YOUR SINGING PERFORMANCE Press the REC button to start recording your singing and the music. The record indicator will light solid. To stop recording, press the REC button again. The record indicator will turn off.
    NOTES :

    • Insert a USB drive (not included) into the USB slot to record.
    • The recorded audio file will save onto the USB drive.

11. SING WITHOUT THE LEAD SINGER ON THE RECORDING Press the button to remove the lead singer from the recording. Press the button again to resume the lead singer.
    NOTE : Lead vocal removal effectiveness may vary depending on the song.
    

12. SELECT A VOICE EFFECT:
    Press the or button to choose a voice effect.

13. TURN OFF THE UNIT:
    Press and hold the button to power off the unit.
    

Steps for playing songs from a USB drive:

1. Connect the unit as previously described and press the button to turn it on.

2. Insert a USB flash drive containing MP3 files into the USB port on the unit.
   

3. If the unit is connected to a TV, press the USB button or use the Navigation buttons , , , to select “USB OPEN” in the main menu. The display will show “READ” indicating that the USB mode is being accessed. Note that the USB mode cannot be accessed until a USB drive with songs is inserted.

4. Turn on the microphone by pressing the button.

5. Adjust the units volume to a comfortable level using the MUSIC VOLUME/MIC VOLUME control.
   

6. To adjust the microphone volume, toggle the MUSIC VOLUME/MIC VOLUME control on the unit or press the or buttons on the microphone.
   Increasing this control will increase the volume of the microphone.
   

7. To start playback of an MP3 file, press the button. If you wish to pause the music momentarily during playback, press the button. Press the button again to resume normal playback. To stop playback, press and hold the button.

8. SKIP : Advance or go back one track by pressing the or button. To skip forward or backward 10 files/tracks, press and hold the or button.
   

9. Press the or button to choose a voice effect.

10. To turn off the unit, press and hold the button.
    

Steps for using the AUX IN jack on the device

1. Connect the unit as described previously and press the / button to turn it on. The power indicator will light up.

2. Connect an external unit to the AUX INPUT Jack using a 3.5mm auxiliary audio cable (not included). This will allow the audio from the external unit to be played through your Singing Machine.
   NOTES :

   • It is highly recommended to set the volume on the auxiliary unit to 1/3 or lower to avoid distortion.
   • Skipping files/tracks is not possible on this unit when using an external device.
     

3. If the unit is connected to a TV, press the AUX button or use the Navigation buttons , , , to select “AUX IN OPEN” in the main menu. The display will show “AUX” to indicate that the AUX mode is activated.
   

4. Adjust the volume to a comfortable level using the MUSIC VOLUME/ MIC VOLUME control.

5. Turn on the microphone by pressing the button on it.

6. To adjust the microphone volume, toggle the MUSIC VOLUME/MIC VOLUME control on the unit or press the or buttons on the microphone as desired.
   Increasing this control will increase the volume of the microphone.
   

7. Press the or button to choose a voice effect.

8. To turn off the unit, press and hold the button.
   

Sound Effects

vocal enhancer
Alt-Rock| Queue up your fav alternative & rock tunes with this crowd pleasing vocal effect
Reggae-Tone| Enhanced echo makes voices shine especially while singing reggae and reggaeton
Grunge| Unmistakably gritty, great for rock, alt, pop and just making your voice sound cool
Hip-Hop| Big room echo & reverb, great for hip-hop, rap and R&B
Oldtown Rd| A touch of echo with added vocal boost that’s great for belting out country tunes
Up to Mars| Big echo, good for a wide range of songs from ballads to funk
Pitch Tune C| Pitch Tune like the pros with this pitch enhancing effect for singing in the key of C
Pitch Tune D| Pitch Tune & enhancing effect for singing in the key of D
Pitch Tune E| Pitch Tune & enhancing effect for singing in the key of E
Pitch Tune Chromatic| Pitch Tune & enhancing effect (Chromatic Scale)
Nosebleed Seats| Did someone say sold out stadium shows?
Radio| Great for singing 90’s Rock or for making big announcements
Doubling| Classic & versatile doubling effect
Doubling Tuned| Voice doubling with pitch tuning enhancement
Radio Tuned| Classic radio effect with pitch tuning enhancement
Squeeze| A fun, voice morphing effect that tweaks voices to a higher pitch
Diva| Add a sassy touch to voices
Voice Drop| Deepens voices for a fun effect
Deep Deep| Tunes voices deep & low
Robot| Machiney & robotic
Chipmunk| Mousey, squeaky fun voice effect

Troubleshooting Guide

If your unit exhibits a problem, try the following before seeking service:

No Power

• Press the button to turn on the power.
• Connect the unit to AC power to recharge the battery.
• Ensure the AC adapter is securely connected.
• Try connecting the unit to a different outlet.
• The normal function of the product may be disturbed by strong Electro-Magnetic
  Interference. If so, simply restart the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in another location.

No Sound – General

• Raise the volume by adjusting the MUSIC VOL/MIC VOL control.
• Correct function was not selected; select the correct function.
• If using an external device, increase its volume.

No Sound – If connected to a TV

• Ensure the correct mode (Sing Cast) is selected on the unit.
• Note that Bluetooth music audio and singing performance cannot be output to the TV.
• Check the TV volume and unmute if necessary.
• Select the correct source (usually HDMI) on the TV’s menu.

No sound from the microphone

• Replace the batteries in the wireless microphone.
• Set the mic’s ON/OFF switch to the ON position.
• Adjust the MUSIC VOLUME/MIC VOLUME control to an appropriate level.
• Note that the microphone input cannot be output to the TV.

Bluetooth device pairing or connection issues

• Turn off other Bluetooth devices to prevent accidental pairing.
• Activate the Bluetooth function on your device  or refer to the Bluetooth device user’s manual.
• Press and hold the button to restart pairing mode.

Music not available on the unit after successful Bluetooth connection

• Ensure your Bluetooth device supports the A2DP Bluetooth profile.
• Increase the volume or unmute the external Bluetooth device.

Failed to connect to the Wi-Fi network

• Make sure the unit is within the Wi-Fi signal range.
• Verify that you have entered the correct password.
• Confirm that the mobile device and unit are connected to the same Wi-Fi network.
• Note that WPA3 security settings may cause connection issues. Consider switching to WPA2 or lower security, or seek further assistance.

Need Help Casting? Start here!

Scanning QR code fail

• Rescan the QR code. If unsuccessful, try using a specific QR code scanning app.
• Alternatively, connect the SingCast unit directly to your Wi-Fi network through the “SETTINGS menu/Wi-Fi setting.”

No Internet connection

• Make sure the unit is in SingCast mode.
• Verify the correct Wi-Fi password is entered.
• Ensure the SingCast unit is within 10 meters of the router to avoid weak signal. If the WiFi signal level is weak we recommend that you relocate the SingCast unit closer to the router.
• The unit is compatible with Wi-Fi security standards: WPA, WPA-PSK, WPA2, WPA2-PSK, WPA3, WEP 64 bit & 128bit, IEEE 802.11x, and IEEE 802.11i.
• If your router has a security standard higher than WPA3, set it to WPA3 or lower.
• If still unable to connect, consider factory resetting your router while noting down your SSID and password. *Make sure you have written down your existing customized SSID name and password, this will help in reconnecting your previously connected devices and revert to your previous WiFi security settings.
• Check for any internet connection problems on your router and ensure the SingCast unit is not restricted from going online.
• Connect the unit’s Wi-Fi to your mobile device’s hotspot with data service to verify Wi-Fi functionality.

Cannot find the SingCast unit on your Karaoke app casting list / No Casting video to TV

• Ensure both the SingCast unit and your mobile device are connected to the same Wi-Fi network.
• Check advanced security settings to enable DLNA if SingCast is not appearing as a casting option.
• If using a router with Mesh function, enable the “Access Intranet” function.

Specifications

• AUDIO
  Output Power ………………………………………………………………………………………………….25 Watts (RMS)

• BLUETOOTH
  Bluetooth Version ………………………………………………………………………………………………………………..V5.0
  Working Distance…………………………………….Up to 30 feet/10 meters measured in open space

• USB
  Format……………………………………………………………………………………………………………………………….FAT32
  Maximum Capacity…………………………………………………………………………………………………………….32GB

• Wi-Fi
  Wi-Fi frequency ………………………………………………………………………………………………… 2.4GHz/5GHz

• CONNECTING JACKS
  Microphone ……………………………………………………………………………………………………………………. 6.3mm

• GENERAL
  Power………………………………………………………………………………………………………100-240V, 50/60Hz
  Output …………………………………………………………………………………………. 9VDC ⎓ 1A Positive Center
  Dimensions:
  Main Unit ………………………………………………… 8.7 x 11.0 x 12.9 inches (22.0 x 28.0 x 32.9cm)
  Weight – Main Unit……………………………………………………………………………………….. 7.7 Lbs (3.5 kgs)
  Wireless Microphone ……………………………………………………. 2.4GHz band Dynamic Microphone

Specifications are subject to change without notice.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks and logos by The Singing Machine Company, Inc. is under license.
Other trademarks and trade names are those of their respective owners.

Customer Support

Visit Our Website : www.singingmachine.com
Visite Nuestra Pagina de Internet : www.singingmachine.com
Visitez notre site Web : www.singingmachine.com

U.S. Representative
Company Name : The Singing Machine Company, Inc.
Address : 6301 NW 5th Way, Suite 2900,
Fort Lauderdale, FL33309, USA
Telephone : 1-866-670-6888
Website : www.singingmachine.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>