nathan james 12901 Aubrey 3 Lights Farmhouse Wall Light Fixture User Manual
- June 16, 2024
- NATHAN JAMES
Table of Contents
**nathan james 12901 Aubrey 3 Lights Farmhouse Wall Light Fixture User Manual
**
Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to Netflix in no time.
Estimated time for assembly
25:00
What you need
- Your favorite snack or energy bar (Save the bubbly for once your fixture is safely installed!)
- Use the packaging carton as a working surface to prevent product damage during assembly
- Phillips head screwdriver
Do not use a drill
Toll-free at 1-866-619-1004
Help@nathanjames.com
Nathanjames.com/help
What’s included
| NO | Description | Qty |
|---|---|---|
| ! | Fixture | 1 |
| 2 | Wall Plate | 1 |
| A | M4*26mm Screws | 2 |
| B | Wire Nuts | 4 |
| C | Mounting Bracket | 1 |
| D | Wrench | 1 |
| E | M10*8mm Finial Nuts | 2 |
Scan me!
Inspiration
Digital Instructions
Free Lifetime Warranty
Safety first, fun later
Safe use of this product starts with you.
Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
Proper use
DO NOT use for commercial purposes
DO NOT leave spilled liquid on fixture
DO NOT use light fixture if damaged
DO NOT make temporary repairs
DO NOT use outdoors
Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which Nathan James will not be responsible for.
WARNING
Inspect the wire insulation for any cuts, abrasions, or exposed copper that
may have occurred during shipping. If there is a defect in the wire, do not
attempt installation. Please reach out to our Customer Happiness team at
help@nathanjames.com or 1-866-619-1004
WARNING : RISK OF ELECTRIC SHOCK
Before starting the installation, disconnect the power by turning off the
circuit breaker or by removing the appropriate fuse at the fuse box. Turning
the power off at the switch is NOT SUFFICIENT to prevent electrical shock.
PLEASE CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.
IMPORTANT
- Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes.
- Do not over tighten screws and bolts to avoid stripping.
- Please use hand tools to assemble this product. Do not use power tools.
Pre-Installation
-
Read all instructions prior to beginning assembly.
-
To avoid damaging this product, assemble it on a soft, non-abrasive surface
such as carpet or cardboard. -
Keep the receipt and these instructions for proof of purchase.
-
Suggested Bulb: A19 LED 60 Watt Equivalent | E26 Medium Base | Dimmable
-
Max. Wattage: 180W (60W per bulb)
-
120V 60Hz AC Only.
Step 1
Let’s get this thing fired up! Or should we say, lit!
Thread horizontal support tubes onto the main Fixture (1).
Step 2
Remove hardware components from the back of the horizontal support tube
Step 3
Guide wires from the Fixture (1) through the Wall Plate (2). Then, secure the
Wall Plate (2) and Fixture (1) together using the hardware components from
Step 2.
Step 4
Unscrew the Finial Nuts (E) from the Mounting Bracket (C).
Step 5
Using the Screws, secure the Mounting Bracket to the pre-installed Electrical
Box in your wall.
You’re halfway done!
Note : Be sure that you are only making the connections to a 120V 60Hz AC
circuit. If you do not have a pre-existing electrical box, we strongly advise
using a certified electrician.
Be sure that the pre-installed screws on your Mounting Bracket are level with
the ground
Step 6
Wrap the Ground Wire from the Wall Plate (2) around the grounding screw on the Mounting Bracket (C) & then secured by tightening the screw.
Step 7
Use Wire Nuts (B) to connect the matching colored wires (White to White, Black
to Black & Ground to Ground). Once complete, tuck the excess wire into the
Electrical Box.
Step 8
Secure fixture to the Mounting Plate on your pre-installed Electrical Box
using the Finial Nuts (E)
To properly fasten the finial nuts, thread in or out to adjust for proper
threading length.
Step 9
Last but not least, screw in your preferred light bulb. We recommend using 3
Type A19 Bulbs, 120V 60Hz AC (not included).
And voila! Let there be light!
We recommend using Type A19 LED 60 watt equivalent bulbs (not included). 120V 60Hz AC only
Troubleshooting
| Problem | Possible Causes | Solutions |
|---|---|---|
| The bulb will not light. | The bulb is burned out. | Replace the light bulb. |
| The power is off. | Ensure the power supply is on. | |
| The circuit breaker is off. | Ensure the circuit breaker is in the ON position. | |
| The fuse blows or circuit breaker blows when the light is turned on. | There is | |
| an exposed wire. | Discontinue use of the light. Contact a qualified |
electrician or reach out to our Customer Happiness team at help@nathanjames.com or 1-866-619-1004.
Questions? Don’t worry we’ve got the answers
What other light bulbs can fit in this light?
The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit.
Can I use an LED light bulb?
Yes, so long that the base size matches and the diameter of any area of bulb is less than diameter of any area of shade, so that it can fit.
Is this UL/ETL certified?
Yes, all our products are either UL or ETL.
Do I need an electrician to set up the hardwire?
We recommend using a certified electrician for all hardwiring, although all of our fixtures can be set up without an electrician, as long as you are replacing an existing fixture or have an existing junction box ready for a fixture installation. ENSURE POWER IS OFF WHEN INSTALLING. For all new constructions, please use a certified electrician.
Can I retrofit this hard-wired to a plug-in or vice-versa?
Yes, a plug-in fixture can be turned into a hardwire fixture and a hardwire fixture can become a plug-in fixture. For many products we will provide all the necessaryardware to make these changes, if not, you will need to purchase the necessary hardware.
Is this light compatible outside North America?
Our lighting is only warranted in Canada and the United States.
What do I do if the product is not working?
Try a different light bulb and confirm proper installation.
Can these lights work on a dimmer?
Dimmability is related to the light bulb and the wall switch, not the light fixture. All our hardwire fixtures are compatible with dimmable light bulbs. We recommend using a dimmer switch, as it extends the life of the bulb and allows for energy saving and great ambiance. If using a LED bulb, please ensure both your LED bulb and dimmer switch are compatible.
Can I use the fixture outdoors?
No, this product was designed to be used indoors only in dry or damp locations.
No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.
Our way
Give us a call
Replacement
You
Their way
Re-package item
Schedule pick up
Track package
Replacement
You
We really don’t want you to go through the hassle of re-packaging your item
and ending it back, because let’s be honest…nobody has time for that.
We are only in business if you’re happy
For starters, thanks for being you.
Toll-free at 1-866-619-1004
Help@nathanjames.com
NathanJames.com/help
We do our best to ensure your product arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part imaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please
use your phone to scan the QR code to register your product or visit
https://goo.gl/i9dk3q
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or
even better leave us a review online. Spreading the word gives us the
opportunity to make more people happy and keep our prices low for your next
purchase
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>