Nilight 14025C-B 2PCS 3Inch 42W LED Cubes Upgraded Spot Instructions
- June 16, 2024
- Nilight
Table of Contents
Installation
- Testing the light bar to the power (12V DC) directly, Red line contact to positive of power, black line contact to power negative.
- Splice light bar wires to the blue male terminals, and then connect to the wiring harness female terminals (black to black, red to red)
- Connect the red wire (with fuse) to battery positive terminal, while the black wire from relay to battery negative terminal.
- Flip the switch On/Of to test the LED light bar.
FAQ
DOES IT FIT MY VEHICLE?
Our led light bars fit most vehicles(Off-road vehicle, Special vehicle, Engineering vehicles). But you need to measure the place where you want to install the light bar so that you can choose the correct size.
I FOUND CONDENSATION INSIDE THE LIGHT BAR. WHAT SHOULD I DO?
Firstly, remove the breather or 2 side lids Secondly, turn on the light bar Thirdly, after 1-2 hours lighting, the vapour will be out.
HOW TO CLAIM THE WARRANTY?
Step 1. Contacting Nilight Customer Service via E-mail (customerservice@nilight.com) for the item's issue. Step 2. Please provide the following information: a. screenshot of your order information b. pictures of the defective item Step 3. After the inspection and confirmation of the issue, we will provide you with a replacement free of charge.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>