CALEX 5301000500 Smart Floorlamp RGB Digital Instruction Manual
- June 16, 2024
- CALEX
Table of Contents
CALEX 5301000500 Smart Floorlamp RGB Digital
Assembly
- Connect the aluminum grooved frames with the connectors.
- Connect the LED strip light, remove the paper cover and press the LED strip light carefully in the groove. It works best if the frame is upright.
- Press the lid into place
- Push the end cap into place
- Connect both support tubes to the lower standard and fix them with the supplied ones Allen key and screws.
- Insert the plug into one outlet.
- See Manual C1 to connect the floor lamp to the Calex Smart app.
- Remote control instructions:
- On/off switches
- Timer presets
- Increase/decrease brightness in static RGB and white light mode
- Speed up/down in dynamic RGB mode
- White light switch
- RGB light switch
- Mode test
- Static RGB color
- Music mode
When the brightness is dimmed, the battery must be replaced. Battery type (not included): 2x AAA 1.5 V
Calex Smart app
Before you start adding this CALEX SMART product, make a note of the name and password, including spaces and capital letters, of your WiFi network. Provide a strong Wi-Fi signal Note: This item only works on one 2.4 GHz wifi network, not on one 5 GHz WiFi network. If you get the message that the product only works on 2.4GHz networks, then you must de-change the wifi frequency of your network to 2.4 GHz in the settings menu of the router. Contact your internet provider for this.
- Download the CALEX SMART app from the Google Play Store, the Apple Store or scan the QR code.
- Open the app. Are you using the app for the first time? Then follow the instructions on the screen to your to create an account.
- Before being able to put the floor lamp in the app, you may have to reset it first. Set lamp on If it lights up red constantly, you need to reset it first. Use the floor lamp for this the switch off and on again three times. The lamp will blink red. You can now the floor lamp put in the app. Do you have bluetooth on your phone and is it turned on? Then there is automatically connected.
Failed to connect automatically?
Then add this lamp by touching the + (at the top right of the screen). Follow
the prompts to complete the installation complete. For more information, see
our website: www.calex.eu