COSTWAY 89540470 Children Table and Chair Set User Guide
- June 16, 2024
- COSTWAY
Table of Contents
89540470 Children Table and Chair Set
User Guide
Before You Start
Please read all instructions carefully and keep it for future r eference.
General Security Warning
Caution: Children should use this product under the parental supervision.
Danger: Keep all small parts and packaging materials for this product
away from babies and children, otherwise they may pose a choking hazard.
Danger: Lack of attachment may cause a risk of tipping.
WARNING: CHOKING HAZARD
-Small parts.
Not for children under 3 years.
Warning for Assembly
Assembled only by adults
Remove all packaging, separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near the area in
which they will be placed in use, to avoid moving the product unnecessarily
once assembled.
Ensure a secure surface during installation, and place the product always on a
flat, steady and stable surface.
Parts List
Table Installation Diagram
- Insert the table shelf into the table side panel slot, install the cross nut at the position shown in the figure (the notch can be tightened with a coin), and strengthen the connection.
- Connect the other end of the table shelf to the other table side panel in the same way.
- Place the fluted side of the tabletop downward, aligning it with the corresponding position on the table side panel, and press firmly to fit the tabletop (when you hear a “click” sound, it means that it has been installed firmly).
Chair Installation Diagram
-
Place a chair side panel flat on the ground, insert the chair back and chair seat into the corresponding holes of the chair side panel, squeeze the back and seat to make them fit tightly with the side panel.
-
Insert another side panel of the chair on the corresponding column of the backrest and seat, and squeeze the side panel to make it fit with the backrest and seat.
-
Fasten with cross nuts as shown in the figure.
Table and Chair Assembly Completed
- Please use it on a flat and spacious ground.
- Before use, please check whether all parts are firm, whether the table or chair is shaking, and adjust accordingly.
- During use, please check whether all parts are loose regularly or irregularly. If so, please tighten it in time.
Return / Damage Claim Instructions
DO NOT discard the box / original packaging.
In case a return is required, the item must be returned in original box.
Without this your return will not be accepted.
Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a
part is needed for replacement. This helps our staff identify your product
number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your
replacement or refund processed quickly. Please make sure you have the box
even if it is damaged.
Send us an email with the images requested.
Email us directly from marketplace where your item was purchased with the
attached images and a description of your claim.