CAKE Trapp Rear Brake System Kit User Manual

June 16, 2024
cake

CAKE Logo Trapp
Brake side adjustment manual

Hello & Welcome!

Congratulations on your purchase and becoming a member of the ever growing CAKE family. CAKE was founded to inspire and excite towards a zero emission society, by creating motorcycles and mopeds of the highest standard imaginable. With our 16” bike, we’re spreading the joy of riding to the youngest of riders! We understand that you and your little one are eager to get going, but before you do – make sure that you read through this user manual in order to properly assemble the 16” bike. Trust us, together you’ll soon be ready for some serious, emission-free, fun!
Explore with respect.
Brake adjustement

To change side of the brakes on the Cake Trapp is an easy fix.
– Start with screwing in the adjusters on the brake levers as much as possible by screwing the inner ring (1) out and after that screwin in the whole adjustment unit (2).

CAKE Trapp Rear Brake System Kit

Push the brake together (1) and while compressed pull the silver loop (2) back and lift it out of the brake (3) to release the brake.

CAKE Trapp Rear Brake System Kit 1

Adjust the brake adjuster on the handlebar so that the two slots in the adjuster align with the slot in the lever (1) Pull the housing out of the adjuster and slide the wire thru the slot to free the brake cable (2) Repeat process for both brakes.

CAKE Trapp Rear Brake System Kit 2

Take the loose wire and housing from the Right brake and slide the wire stop in to the left handle (1)
Slide the wire thru the slot in the lever and adjuster.
Adjust the adjuster so that the slots miss align and push in the housing in the adjuster (2)

CAKE Trapp Rear Brake System Kit 3

(1) Slide the cable stop in to  the lever and thru the slot
(2) Miss align the adjuster and push in the housing
Compress the brake arms again and position the silver loop in the brake arm (1)
Slide in the silver loop while still compressed and once in position let go of the brake arms to put tension on the system again. (2)
Check brake function and adjust tension on brake adjuster at brake lever if needed.
Repeat for both brakes

CAKE Trapp Rear Brake System Kit - Repeat

Support and Contact

If you have any problems or questions regarding the bike, send an email to service@ridecake.com
For general questions and information, get in contact with us at hello@ridecake.com
www.ridecake.com
CAKE 0 Emission AB
Hammarby Fabriksväg 43
120 30 Stockholm
Sweden
This manual is constantly being updated.
Please make sure that you have the latest one on www.ridecake.com/manuals

CAKE Logo

Documents / Resources

| CAKE Trapp Rear Brake System Kit [pdf] User Manual
Trapp Rear Brake System Kit, Trapp, Rear Brake System Kit, Brake System Kit, System Kit
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals