CAKE Makka Front Carrier Instructions

June 9, 2024
cake

Makka carrier / front
Instructions

Makka Front Carrier

CAKE Makka Front Carrier-

Items  Instructions
1   Remove the plate from the carrier by removing the three screws

included
2|   Remove the headlight from the frame by removing the four screws| 4x screws
3x screws
3|   Put the headlight through the carrier and put the plate back
with the three screws| Tools needed
Torx 45
Torx 30
4|   Install the carrier between the headlight and the frame using   the four new screws
5|   Tighten the small screws on the removable plate to 10Nm and   the big screws to 15Nm

Note: be aware of the loading height with this product to make sure it does not cover the light and turn signals.
Please contact your local CAKE service center if you need support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals