cake High Performance Electric Motorbikes User Guide

June 9, 2024
cake

cake High Performance Electric Motorbikes

cake-High-Performance-Electric-Motorbikes-product-
image

Hello & Welcome!
We are extremely flattered that you have chosen to ride a CAKE electric motorbike. We take pride in serving you with up-to-date product information, service and spare parts for an effortless experience, today and tomorrow.
Our ambition is to develop uncompromising high-performance off-road motorbikes. CAKE´s mission is to inspire people, contributing to speeding up the journey towards a zero-emission society, by combining excitement with responsibility.
To optimize the performance and benefits for an off-road motorbike with an electric drivetrain, effectively establishing a brand new vehicle category, we needed to start from scratch. Every little detail, including both physical components and software, has been engineered, designed and chiseled for perfection – while remaining true to our sustainability objectives.
This manual should be your tool and guidance for general maintenance, safety precautions, service matters – stretching from what may be dealt with by yourself and what needs to be handed over to professional mechanics – tuning, warranty aspects, handling, and troubleshooting
Explore with Respect
Stefan Ytterborn Founder & CEO

Getting started

This is a short briefing, featuring the most frequently asked questions. Your potential questions might not be answered, we encourage you to read the full manual, terms and conditions and get in touch with us if you have any other questions. Our bikes are built for easy tinkering, we’re happy to help you and if you’re unable to maintain your bike, your local bicycle or motorcycle shop will be able to assist regardless of earlier CAKE experience. To learn more, visit: ridecake.com/en/service-support

Delivery & Arrival

Delivery
Our delivery partner will contact you using the phone number you’ve provided to schedule a delivery window.

  1. You’ll receive a tracking number.
  2. Delivery service truck.
  3. Call from the delivery service that the bike is arriving.

Arrival
Freight damage is unusual. If something should have happened to your box or bike, follow these steps.

  1. Take a photo of the box.
  2. Have the driver wait while you unbox the bike.
  3. Take photos of any damage to the bike.
  4. Most items can be replaced by CAKE, so please you will accept the bike if there is merely damage to just an individual component or part.
  5. If the frame is severely damaged, call our 800-hotline number and discuss the matter with a Customer Service Representative before accepting the bike and letting the driver go.
  6. Email photos to service@ridecake.com. Photos must be received immediately upon delivery for the damage to be covered under the warranty.
Unboxing

The delivery from CAKE includes:

  • 1x Preassembled CAKE Kalk
  • 1x Battery charger
  • 1x Toolset
  • 2x Side-view mirror (if street legal)
  • 2x Reflector (if street legal)
  • 2x Key for steering lock and battery lock (if street legal)

To disassemble the box and unpack the bike, please follow the following steps:

  1. Unbox according to How to unbox the Kalk on ridecake.com/en/kalk-manuals-and-videos.
  2. Check that the handlebar is properly fastened with included toolset.
  3. You will need to elevate the bike to install the Front Tire. It’s best to use a 15’’ bike stand or an object that can support at least 200 lbs
  4. Snip the zip tie securing the front wheel.
  5. With assistance, lift Kalk out of the pallet from the rear wheel and set the undertray on a bike stand.
  6. Once Kalk is held in place on a bike stand loosen the 4 clamping screws with a 5mm hex wrench and remove the front axle bolt using an 8mm and 10mm hex wrench.
  7.  Remove the brake wedge on the calipers (Do not pull on the front brake lever once the calipers are removed*).
  8. Place the wheel spacers in the correct position (the side with a step poiting into the hub).
  9. Put the front wheel in place and insert the axle.
  10. Once inserted, tighten the axle to 50 Nm.
  11. Tighten the 4 clamping screws to10 Nm
  12. Charge the battery, see ”2.4 Charging”. During transport, the battery is discharged.
  13. Mount the side-view mirrors (if street legal)
    • Place the washer between the handlebar and the nut.
    • Tighten the nut with the toolset wrench.
  14. Mount the license plate in accordance with applicable law. (if street egal)
  15. Mandatory in the US, voluntary in the rest of the world: Stick the reflectors to the side of the swingarm.
  16. Recycle packaging in accordance with local laws and regulations.

General information

Charging

When charging the bike, do the following steps. ALWAYS read the charging manual before charging. Please check the charger specific manual at ridecake.com/manuals to if you have any questions regarding your charger.

  1. Make sure that the battery is connected to the bike.
  2. Make sure that your charger’s voltage settings correspond to the voltage in your outlet. If the charger has the wrong settings, it will break. If you’re unsure on what voltage you use in your country, try a Google search or call your electric utility provider.
  3. ALWAYS start by connecting the charger to the bike, before you connect the charger to the outlet!
  4. Plug the charger into the outlet.

Getting started

Kalk street legal

  • Press the silver button in front of the seat.
  • Put on the red killswitch.
  • Press the white display button.
  • When your dashboard shows speed 00, the bike is running and ready.
  • To turn off the bike, remove the kill switch and press the silver button.

Note: The bike won’t start when the side stand is down.

Kalk off road

  • Press the silver button in front of the seat.
  • Put on the red killswitch.
  • When the 4 upper led lights light up, the bike is running and ready.
  • To shut off the bike, remove the kill switch and press the silver button.
Display

Kalk street legal
PIN default
How to change the PIN
We advise you to change the PIN to personalize your bike and avoid it from getting stolen. Once the PIN has been changed, write it down and don’t lose it. If you would lose or forget your PIN code has to be reset by the CAKE service team.
Your PIN can consist of either 3 or 6 digits. The available digits are 1, 2, or 3. A PIN can for example be “131”, “113”, “132212” or “123321”.

  1. In the “ENTER YOUR PIN” screen, hold button 2 and 3 (middle and lower) simultaneously for 5 seconds.
  2. Enter the current PIN (factory default = “123”).
  3. Enter your new PIN.
  4. Enter your new PIN again to confirm.
  5. Your new PIN is now set, please restart the bike to make sure it works.

How to change between mph and km/h
Change between miles per hour and kilometers per hour. Start the bike by holding the start button and enter the PIN code. Press and hold the lower button on the display to change between mph and km/h.

Kalk off road
The kill switch is located on the right side of the handlebar. When the kill switch is connected with the magnet, the bike is turned on. When you are done riding or in case of an emergency, pull the kill switch to turn off the bike.
The dashboard on the stem is the bikes control panel. Here you can see the bikes SOC (state of charge), Ride mode, Brake mode and warning notifi cations

2.4 Ride- & Brake modes
Ride mode 1
Explore: The ultimate mode during exploration. Limited speed to 45 km/h and ≈3 hours of range.
Ride mode 2
Excite: Enduro or active trail riding. 1-2 h riding time.
Ride mode 3
Excel: Fastest mode, maximal torque and speed, riding time up to till 1h.
Brake mode 1
Freewheel, no motor braking.
Brake mode 2
Moderate motor braking, similar to a 2-stroke engine. The braking power is regenerated to the battery for extra range.
Brake mode 3
Strong motor braking, re-generative, similar to a 4-stroke engine. The braking power is regenerated to the battery for extra range.

Lock

In order to keep your bike safe. It’s recommended to use an external lock that is recommended for motorcycles. When leaving your bike on the street, always turn the bike off and remove the key as well as the kill switch from the bike.

Steering lock

Lock the steering lock by turning the handlebar all the way to the left, insert the key into the steering lock and turn the key. You will feel how the handlebar will lock in that position, effectively making it impossible to ride the bike. The steering lock is found under the triple clamps between the fork legs.

Removal of the Battery

In order to remove the battery please follow the steps below. Make sure that the bike is standing securely before removing either the seat and/or the battery pack.
Removing the seat
Use a 5mm Hex key and unscrew the screws under the seat. Then pull the seat upwards and backward in order to remove the seat.
Removing the battery pack
Use a hex key to remove the 2 screws that hold the battery pack down. When removed, put away the 2 screws nearby. There are two steel rods holding the battery in place, make sure to lift the battery straight up using both hands. Note that the battery pack is very heavy, and you might want the help of a friend to assist.
When mounting the battery in the bike, make sure that there’s no dirt or objects on the battery rubber floor or where the connectors are. This can cause the battery to not connect properly. Look through the holes in the battery pack making sure that you match up the holes and the metal rods before gently sliding it down. Use the help of a friend if needed.
When you don’t have the battery inside the bike, always be careful when handling the battery. If dropped, inspect it visually and get in contact with a CAKE employee if there’s any damage to it.
Slide the seat on and make sure that the metal tongue gets full contact with the pin without any cables getting in the way. Before screwing on the 2 bolts in the rear seat, make sure that the seat has good contact with the carbon frame, both in the front and on the side.

Ownership and Operation

Maintenance

While CAKE bikes are low maintenance, they will perform best when cared for. To avoid stripping the screws avoid using power tools.
During removal, some bolts have Loctite in the threads (example: suspension system, footplate, and center stand). Use a heat gun to soften the Loctite to help avoid stripping these bolts. If additional leverage is needed, use a breaker bar or impact wrench. During installation, if the bolt had Loctite prior to removal be sure to add fresh Loctite of the correct grade before reinstalling (blue = #243, red = #271). Only a drop of Loctite is needed – do not soak the threadsin Loctite. Install the bolt and use a torque wrench to tighten the bolt to specification.

 Cleaning

Always be cautious when cleaning the bike. The bikes electrical components can be damaged if cleaned improperly which can damage the bike, property and people.
Always make sure that the bike is standing firmly before washing and don’t forget to turn the bike off.
Never use a pressure washer or a water hose in order to clean the bike. It’s recommended to use pressurized air, a bucket of water together with a cloth and brush. When cleaning the chain, use a chain cleaner and scrub the chain with a brush. Repeat the cleaning before drying the chain and apply chain lube.

Warranty & Service

Need a hand? Have any technical questions?
Connect and get support at: ridecake.com/en/service-support- form
Terms and conditions, go to: ridecake.com/en/terms- conditions

Country homologation
All street legal bikes are homologated for the specific country it’s being delivered to. That means that lights, blinkers and other ”street legal necessities” might differ in look, style and dimensions, everything in order to meet local regulations.
The specs, such as range, speed, and power are not estimated by CAKE. The numbers are results from the European homologation test, WMTC-II.

VIN
Complete this registration prior to submitting a service request.
Please include the VIN number.

You find the VIN number on the bodywork, right above the controller, on all Kalk models

Contact and Support

If you have any problems or questions regarding the bike, send an email to service@ridecake.com
For general questions and information, get in contact with us at
hello@ridecake.com
www.ridecake.com
CAKE 0 Emission AB
Hammarby Fabriksväg 43
120 33 Stockholm
Sweden
This manual is constantly being updated.
Please make sure that you have the latest version by frequently visiting www.ridecake.com/manuals

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals