Taylor T-6759R Angle Die Grinder Installation Guide
- June 16, 2024
- TAYLOR
Table of Contents
Taylor T-6759R Angle Die Grinder Installation Guid
T-6759R 1/4” ANGLE DIE GRINDER
OILING INSTRUCTIONS:
OIL AFTER EACH USE WITH A FEW DROPS OF AIRTOOL OIL THROUGH THE AIR INLET. RUN FOR 1 SECOND TO COAT ALL INTERNAL PARTS.
USE 90 PSI MAXIMUM
| REF # | PART # | DESCRIPTION | QTY |
|---|---|---|---|
| 1 | 6759R01 | HOUSING WITH BUSHING | 1 |
| 3 | 6759R03 | EXHAUST DEFLECTOR | 1 |
| 6 | 6759R06 | LEVER | 1 |
| 7 | 6759R07 | PIN | 1 |
| 8 | 6759R08 | THROTTLE BUSHING | 1 |
| 9 | 6759R09 | VALVE STEM | 1 |
| 10 | 6759R10 | O-RING | 1 |
| 11 | 6759R11 | SPRING | 1 |
| 12 | 6759R12 | REGULATOR | 1 |
| 13 | 6759R13 | O-RING | 1 |
| 14 | 6759R14 | O-RING | 1 |
| 15 | 6759R15 | CAP | 1 |
| 16 | 6759R16 | BEARING | 1 |
| 17 | 6759R17 | REAR END PLATE | 1 |
| 18 | 6759R18 | BALL | 2 |
| 19 | 6759R19 | CYLINDER | 1 |
| 20 | 6759R20 | ROTOR | 1 |
| 21 | 6759R21 | ROTOR BLADE (4 PER SET) | 1set |
| 22 | 6759R22 | BALL | 1 |
| 23 | 6759R23 | FRONT END PLATE | 1 |
| REF # | PART # | DESCRIPTION | QTY |
| --- | --- | --- | --- |
| 24 | 6759R24 | BEARING | 1 |
| 28 | T-7504 | 1/4” COLLET | 1 |
| T-7508 | 1/8” COLLET (OPTIONAL) | ||
| 29 | 6759R29 | COLLET NUT | 1 |
| 30 | 6759R30 | WRENCH | 1 |
| 31 | 6759R31 | WRENCH | 1 |
| 32 | 6759R32 | SPACER | 1 |
| 34 | 6759R34 | NUT | 1 |
| 35 | 6759R35 | BEVEL GEAR | 1 |
| 36 | 6759R36 | NUT | 1 |
| 37 | 6759R37 | ANGLE HEAD | 1 |
| 38 | 6759R38 | BEARING | 1 |
| 39 | 6759R39 | BEVEL GEAR | 1 |
| 40 | 6759R40 | COLLET CASING | 1 |
| 41 | 6759R41 | KEY | 1 |
| 42 | 6759R42 | BEARING CAP | 1 |
| 43 | 6759R43 | AIR INLET | 1 |
FOR WARRANTY INFORMATION & WARRANTY REGISTRATION VISIT
www.taylorpneumatic.com
05/23 / ALL RIGHTS RESERVED / COPYRIGHT 2023
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>