GIRA SCHUKO Socket Outlet Instruction Manual
- June 12, 2024
- GIRA
Table of Contents
GIRA SCHUKO Socket Outlet
Product Information: SCHUKO Socket Outlet 16 A 250 V~ with LED Orientation Light and Shutter
The SCHUKO socket outlet 16 A 250 V~ with LED orientation light and shutter is a device designed for electrical installations. It provides a convenient and safe way to connect electrical devices to the power supply. The socket outlet features a built-in LED orientation light and a shutter for added safety.
Device Components:
- (1) Socket outlet base
- (2) Cover frame
- (3) Socket outlet insert
- (4) Light sensor
- (5) Light opening
Intended Use:
The socket outlet is intended for general use in electrical installations. It should be installed by a qualified electrical fitter to ensure proper installation and safe operation.
Product Characteristics:
The socket outlet features a light sensor that automatically switches on the LED orientation light when it detects low light conditions (twilight) and switches it off when the brightness is sufficient. Please note that due to component tolerances, the orientation lights may switch at different brightness values.
Mounting and Electrical Connection:
DANGER! Before carrying out any work on the device, always disconnect it and switch off all corresponding circuit breakers to avoid electric shock. Follow these steps for proper installation:
- Install the socket outlet in a way that the light sensor (4) is not covered.
- Connect the socket outlet base (1) according to the provided circuit diagram (see figure 2).
- Mount the socket outlet base (1) in an appliance box, ensuring that the connection contacts are at the bottom.
- Fit the cover frame (2) and socket outlet insert (3) and fasten them with screws.
Technical Data:
- Rated voltage: AC 250 V~
- Mains frequency: 50 / 60 Hz
- Standby power: 4
- Ambient temperature: N/A
- Power consumption: N/A
- Power factor: N/A
- Rated load current: 16 A (IL) max.
- Circuit breaker: N/A
- Number of LEDs: N/A
- Light color: N/A
- Clampable conductor cross-section: N/A
Warranty:
The warranty for the SCHUKO socket outlet is provided in accordance with statutory requirements. Faulty devices should be submitted or sent postage paid, along with a fault description, to the responsible salesperson or service center.
Operating instructions
SCHUKO socket outlet 16 A 250 V~ with LED orientation light and shutter
Order no. 4170 ..
Socket outlet with earth pin 16 A 250 V~, LED orientation light and
shutter
Order no. 4489 ..
Safety instructions
Serious injuries, fire or property damage are possible. Please read and follow the manual fully.
Installation only by persons with appropriate electrotechnical knowledge and experience in the following areas:
-
The “5 safety rules” to be observed are: disconnect; secure against reconnection; determine that no voltage is present; ground and short-circuit; cover or block off adjacent live parts
-
Selection of suitable tools, measuring devices and, if necessary, personal protective equipment
-
Evaluation of the measurement results
-
Selection of the electrical installation material to ensure the shutdown condi-tions
-
IP protection ratings
-
Installation of the electrical installation material
-
Type of mains supply (TN system, IT system, TT system) and the resulting connection requirements (classic earthing, protective earthing, necessary additional measures, etc.)
-
Improper installation endangers your own life and the lives of people using the elec-trical system and there is a risk of serious damage to property, e.g. through fire. You are at risk of personal liability for personal injury and damage to property.
Contact an electrical fitter! -
The danger of electric shock. Always disconnect before carrying out work on the device or load. In so doing, take all the circuit breakers into account, which support dangerous voltages to the device and or load.
-
The device is not suitable for use in safety-related applications or as an emergency light.
-
This manual is an integral part of the product, and must remain with the customer.
Device components
- Socket outlet base
- Cover frame
- Socket outlet insert
- Light sensor
- Light opening
Intended use
- Socket outlet with LED orientation light and shutter
- Stationary installation indoors in appliance box with dimensions according to DIN 49073
Product characteristics
Light sensor switches LED orientation light on at twilight and switches it off again when the brightness is sufficient.
Due to component tolerances, the orientation lights may switch at different brightness values.
Mounting and electrical connection
DANGER!
- Electric shock when live parts are touched.
- Electric shocks can be fatal.
- Always disconnect device before carrying out work on it. For this, switch off all the corresponding circuit breakers, secure against being switched on again, and check that there is no voltage. Cover up adjacent live parts.
Install the socket outlet in such a way that the light sensor (4) (see figure
- is not covered.
- Connect socket outlet base (1) (see figure 1) in accordance with circuit dia-gram (see figure 2).
- Mount socket outlet base (1) in an appliance box. Connection contacts of the socket outlet base must be at the bottom.
- Fit the cover frame (2) and socket outlet insert (3) (see figure 1) and fasten with screws.
Technical data
- Rated voltage: AC 250 V~
- Mains frequency: 50 / 60 Hz
- Standby power: 0.175 W
- Ambient temperature: 0 … +40°C
- Power consumption: approx. 0.35 VA
- Power factor: approx. 0.70
- Rated load current: 16 A (IL)
- Circuit breaker: max. 16 A
- Number of LEDs: 4
- Light colour: white
- Clampable conductor cross-section: 1.5 … 2.5 mm²
Warranty
The warranty is provided in accordance with statutory requirements via the specialist trade. Please submit or send faulty devices postage paid together with a fault description to your responsible salesperson (specialist trade / installation company / electrical specialist trade). They will forward the devices to the Gira Service Center.
Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 12 20
42461 Radevormwald
Deutschland
Tel +49(0)21 95 – 602-0
Fax +49(0)21 95 – 602-191
www.gira.de
info@gira.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>