IZZY IZ-6103 Digital Coffee Maker Instruction Manual

IZZY IZ-6103 Digital Coffee Maker

Product Information

Specifications:

• Model: IZ-6103
• Product Name: Digital Coffee Maker IZ-6103
• Power Supply: 220-240V ~ 50-60Hz
• Power Consumption: 1000W
• Capacity: 1.8 liters
• Coffee Strength: 15-17

Product Usage Instructions

1. Initial Setup

To set up the coffee maker for the first time:

1. Make sure the LCD (14) is displaying “12:00”.
2. Press the HOUR (19) button to set the hour. Use the HOUR button to toggle between AM and PM.
3. Press the HOUR (19) button again to set the minutes.
4. Use the MINUTE (20) button to adjust the minutes. Each press of the button increases the minutes by 1. Hold down the button to increase the minutes rapidly.
5. Once the time is set, press the BREW/OFF (21) button to start brewing.

2. Brewing Coffee

To brew coffee:

1. Fill the water reservoir (1) with water up to the MAX line. Do not exceed the maximum capacity.
2. Add coffee grounds to the filter (3). The recommended amount is indicated in the manual.
3. Close the filter lid (7) securely. Make sure it is properly aligned with the arrow mark (8).
4. Place a coffee pot (11) on the warming plate (6).
5. Select the desired coffee strength (17).
6. Press the BREW/OFF (15) button to start the brewing process.

3. Keeping Coffee Warm

To keep the brewed coffee warm:

1. Press the KEEP WARM (18) button. The display will show “0:00”.
2. Use the MINUTE (20) button to adjust the keeping warm time. The options are 0, 15, and 30 minutes.
3. Once the desired keeping warm time is set, press the KEEP WARM button again to activate.
4. To stop keeping the coffee warm, press the BREW/OFF (21) button.

FAQ

1. How do I clean the coffee maker?

To clean the coffee maker:

1. Make sure the appliance is turned off and unplugged.
2. Remove the filter (3) and empty the used coffee grounds.
3. Wash all removable parts with warm soapy water.
4. Wipe the exterior of the coffee maker with a damp cloth.
5. Do not immerse the appliance in water.

2. What are the safety interlocks?

The safety interlocks ensure safe operation of the coffee maker. Please refer to the user manual for detailed information on safety precautions.

Thank you for having chosen an appliance from the IZZY range.

Safety interlocks ****

Please read these instructions carefully before using the appliance and save them for future reference. Please keep the sales receipt for guarantee purposes (pls see below “Guarantee and Customer Service”) Any use which does not conform to the instructions will absolve IZZY from any liability.

• Make sure your electricity supply is the same as the one shown on the underside of the appliance.
• Always plug your device into an outlet that is earthed. Failure to comply with this requirement may result in electric shock and possible serious injury.
• Never leave the appliance unattended when it is operating.
• Close supervision is necessary when your appliance is being used near children or infirm people. Ensure that they do not play with the appliance.
• This appliance is not intended for use by people with reduced physical, sensory or mental capabilities, children or those with lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Switch off and unplug:
  • Before filling with water
  • Before cleaning
  • After each use
  • Before moving
• Allow the appliance to cool down completely before putting on or taking off parts and before cleaning and storage the appliance.
• Never use the appliance for any other use than indicated.
• The device is intended for indoor use. Do not use the device outdoors.
• The device is intended only for domestic use. Any other use will cancel the warranty
• Always use the appliance on a secure, dry, clean and heat resistant surface.
• Do not operate or place the device or parts in places of high humidity or where it may get wet.
• Watch out for steam, never lift the tank lid during the brewing cycle.
• Never touch the plate or surrounding area.
• Always lift the lid using the tab at the front.
• Do not touch the hot parts.
• Do not let the power cord of the appliance hang over the edge of a table or bench top or where a child could grab it. Do not let the power cord to touch any hot surface.
• Never leave the power cable wrapped during use. Unwind it completely.
• Never use highly corrosive or abstractive cleaning agents. Never use metal scouring pads for cleaning.
• Never let the power unit, cord or plug get wet.
• If the appliance does get wet, immediately remove the power cord from the wall outlet and do not put your hands in the water. Never run the wet appliance and contact one of the authorized BENRUBI service centers.
• Do not let the cord touch hot parts.
• Never place this appliance on or near a hot gas or electric burner or where it could touch a heated appliance.
• Always make sure there is water in the tank before switching on.
• This coffee maker is only suitable for use with the type of carafe supplied.
• Do not leave the appliance switched on with an empty carafe on the plate.
• Never put the carafe in the microwave.
• Do not move the appliance when it is in operation.
• Do not touch the appliance with wet or damp hands.
• Do not use an extension power cord.
• Check the power cord periodically for possible damages.
• If the power cord or the plug of the appliance have been damaged, do not use the appliance and contact an authorized BENRUBI Service Center.
• In case of a possible damage, do not attempt to repair the appliance by yourself. Please contact one of the authorized BENRUBI service centers.
• Any repair made by an unauthorized BENRUBI Service Center CANCELS

THE GUARANTEE.

• Any misuse of the device cancels the warranty.
• Only use original spare parts.
• The appliance conforms to EU directive 2014/30/EU on Electromagnetic Compatibility, the 2014/35/EU Low Voltage Directive, the2011/65/EU RoHS Directive, the directive 2009/125/EC for eco-design and the EC regulation no. 1935/2004 on materials intended to contact with food.

SAVE THESE INSTRUCTIONS

**Parts of the Appliance

**

1. Lid

2. Water flow (shower)

3. Water tank

4. Control panel

5. Water level indicator

6. Insulating plate

7. Permanent filter

8. Filter holder

9. Anti-drip valve

10. Carafe lid

11. Carafe

12. Carafe handle

13. Coffee spoon
    CONTROL PANEL

14. LCD screen

15. Indication lights

16. “PROGRAM” button

17. “STRENGTH” button

18. “KEEP WARM” button

19. “HOUR” button

20. “MINUTE” button

21. Power button “BREW/OFF”

Before the First Use

• Wash the parts of the appliance. See “Cleaning and maintenance”.
• Run two full tanks of water (without coffee) through the coffee maker to clean it. See “Use your coffee machine”.
  Note: At the end of the first cycle, let the device cool down for 15 minutes.

Time Setting

Note: In the event of a power failure or after unplugging the device from the outlet, the time setting is disabled.

1. Plug in. The display (14) will turn, “12:00” will briefly flash and then will stabilize and flash the colon.

2. Press and hold the “HOUR” button (19) until a beep is heard. The time on the display will flash.

3. Press the “HOUR” button (19) successively until you set the current time. The upper left corner of the screen will alternate between “AM” (before noon) and “PM” (after noon).
   Example: If you want to set the time to 1:00 PM, make sure that “PM” is displayed in the upper left corner of the screen.

4. Press the “MINUTE” button (20) successively until you set the minutes.

5. Once you set the current hour and minutes, the set time will flash 4 times and then will be stabilized.

Note: In the event of a power failure or after unplugging the appliance from the outlet, the time setting is disabled.

Using the Coffee Machine

1. Lift the lid (1) using the tab at the front of the lid.

2. Fill the water tank (3) with the desired amount of water. Attention! Do not fill above the MAX level.
   Note: Use cold water. We recommend using filtered water as it reduces lime scale and prolongs the life of your coffee maker. Never use ware or frizzy water.

3. Fit either the permanent filter (7) supplied or a paper filter into the filter holder (8).
   Note: Ensure the filter holder (8) is positioned correctly.

4. Add the coffee using the spoon supplied (13) (approximately 1 level spoon (7gr.) per cup).

5. Close the lid (1) and put the carafe (11) on the plate (6).

6. If you want to adjust the strength of the coffee, press “STRENGTH” button (17), otherwise go to step “7”. You have 3 options:

   • REG: Default setting for regular coffee strength.
   • BOLD: The BOLD setting adjusts the brewing cycle of a full pot of coffee. It allows more time for the coffee to “boil” to extract the oils and coffee flavor. This results in a pot of coffee with strong aromas and taste.
   • 1-4 CUPS: Recommended for preparing small amounts of coffee (1-4 cups) with maximum flavor.

7. If you want the temperature to be maintained after the coffee has been brewed, you must set the “KEEP WARM” function: To set, follow the steps below, otherwise proceed to step “8”.

   • Press the “KEEP WARM” button (18). The display will show “KEEP WARM” and 0:00 will flash.
   • Press the “MINUTE” button successively to select the time you want your coffee to be kept warm. Options are 0, 15 & 30 minutes.
     Note: If you do not want the appliance to go into KEEP WARM mode, make sure the time is set to “0:00”.
     Note: If coffee brewing starts you cannot set the KEEP WARM function. You should switch off the appliance by pressing the BREW/OFF button (21), activate the KEEP WARM function and start the coffee brewing function by pressing the BREW/OFF button (21) again.

8. Switch on the coffee maker by pressing the BREW/OFF button (21). The power indication light will turn on.

   • The operating process can be stopped at any time by pressing the BREW/OFF button (21). The operation indicator and the display (14) will turn off. The appliance will restart the process by pressing the BREW/OFF button (21) once.
     Note: You can take out the carafe, pour and serve at any time. The coffee maker will stop dripping automatically for 30 seconds.
     If you have activated the KEEP WARM mode:

   • Once the process is complete, a sound will be heard 3 times, the “BREW/OFF” indication light (15) will remain on. The display will show “TIME SINCE BREW” and “0:00”. The appliance will start counting the temperature retention time you have selected.

   • As soon as the temperature maintenance time is finished, a sound will be heard 2 times, the “BREW/OFF” indication light (15) and the “TIME SINCE BREW” indication will turn off. The appliance will turn off.

   • If you have not activated the KEEP WARM function:

   • When the coffee brewing cycle is complete, the power indication light and the display will turn off. Remove the carafe from the plate at least one minute after the coffee has finished brewing. When the jug is empty, switch off and unplug the appliance.
     Note: The amount of brewed coffee after the brewing process will always be slightly less than the amount of water placed into the coffee maker, since some water is absorbed by the coffee ground or evaporates. Add a little extra water at the beginning so that you end up with the exact number of cups desired.
     Note:

   • If you have not used the appliance for a while, run one full tank of water (without coffee) through to clean it out

Automatic Coffee Brewing Operation

For the automatic coffee brewing operation, you must have set the current time (see section: “Setting the time”). First follow steps 1-7 from the “Use the coffee machine” section and then follow the steps below to schedule the operation:

1. Press “PROGRAM” button (16) continuously until a sound is heard. The indication light and the display (14) will turn on. The time will flash on the display.

2. Press the “HOUR” (19) and “MINUTE” (20) buttons successively to set the time you want the coffee brewing process to start. The upper left corner of the screen will alternate between “AM” (before noon) and “PM” (after noon).

3. The time you set will flash for a few seconds, then the display will show the current time and “PROGRAM”.

4. If you want the temperature to be maintained after the coffee has been brewed, you must set the “KEEP WARM” function: To set, follow the steps below, otherwise proceed to step “8”.

5. Press the “KEEP WARM” button (18). The display will show “KEEP WARM” and 0:00 will flash.

6. Press the “MINUTE” button successively to select the time you want your coffee to be kept warm. Options are 0, 15 & 30 minutes.
   Note: If you do not want the appliance to go into KEEP WARM mode, make sure the time is set to “0:00”.
   Note: If coffee brewing starts you cannot set the KEEP WARM function. You should switch off the appliance by pressing the BREW/OFF button (21), activate the KEEP WARM function and start the coffee brewing function by pressing the BREW/OFF button (21) again.

7. When the time has elapsed, the indication light and the “PROGRAM” indication will turn off and the “BREW/OFF” indication light (15) will turn on and the appliance will start operating.
   NOTE: You can cancel the auto start by pressing the “BREW/OFF” button twice.
   If you have activated the KEEP WARM mode:

8. Once the process is complete, a sound will be heard 3 times, the “BREW/OFF” indication light (15) will remain on. The display will show “TIME SINCE BREW” and “0:00”. The appliance will start counting the temperature retention time you have selected.

9. As soon as the temperature maintenance time is finished, a sound will be heard 2 times, the “BREW/OFF” indication light (15) and the “TIME SINCE BREW” indication will turn off. The appliance will turn off.
   If you have not activated the KEEP WARM function:

10. When the coffee brewing cycle is complete, the power indication light and the display will turn off. Remove the carafe from the plate at least one minute after the coffee has finished brewing. When the jug is empty, switch off and unplug the appliance.
    Note: The amount of brewed coffee after the brewing process will always be slightly less than the amount of water placed into the coffee maker, since some water is absorbed by the coffee ground or evaporates. Add a little extra water at the beginning so that you end up with the exact number of cups desired.
    Note:  If you have not used the appliance for a while, run one full tank of water (without coffee) through to clean it out.

Tips for Great-Tasting Coffee

A clean coffee maker is essential for making great-tasting coffee. Regularly clean the coffee maker as specified in the “Cleaning and Maintenance” paragraph.

• Always use fresh, cold water in the coffee maker.
• Fine-cut coffee ensures better filtration, intense aroma and rich flavor. If the coffee is not grinded well enough, add more coffee per cup to ensure the same taste performance.
• Keep coffee in a cool and dry place. When you open the package of coffee, keep tightly closed in refrigerator to keep the freshness.
• For optimal result, buy whole coffee beans and grind them just before the filtering process.
• Do not use the same coffee for the second time, as this would destroy its aroma.
• It is not recommended reheating coffee. Coffee has the maximum aroma, immediately after preparation.
• Small oil stains on the surface of the filtered coffee are due to the extraction of oil from the coffee beans. The oil may also be due to the heavy roast of the coffee.

Descaling

Descaling your coffee machine is recommended at least once a month, depending on the frequency of use and the hardness of the water. If the water in your area is particularly hard, the following cleaning procedure should be done every 2 weeks, otherwise it may reduce the intensity of the coffee flavor and lengthen the brewing time. We recommend cleaning your coffee maker once a month.

1. Mix 6 cups of white vinegar and 4 cups of cold water in the carafe.
2. Pour the mixture into the water tank (3).
3. Place a paper filter on the filter base (8) and place the permanent filter (7) on top.
4. Close the lid (1) and place the empty carafe (11) on the plate (6).
5. Simultaneously press and hold the HOUR (19) and MINUTE (20) keys until a “beep” is heard and the display shows “CLEAN”.
6. Press the BREW/OFF button (21). A “beep” will be heard and the power indication light will turn on.
7. Once the cleaning cycle is complete the power indication light will turn off and a beep will be heard.
8. Discard the vinegar and water mixture.
9. Repeat the brewing cycle 2-3 times with cold water before brewing coffee again.

Cleaning and Maintenance

• Always switch off, unplug and allow to cool before cleaning.

• Don’t wash parts of the appliance in the dishwasher

• Clean all removable parts of the device after each use with warm soapy water.

• Clean the outer parts of the device with a soft, damp cloth.
  CAUTION: Do not immerse the coffee maker in water or any other liquid.

• Do not clean the inside of the water tank with a cloth while may cause remnants of the fabric fibers and clog the coffee maker.

• For intense stains, use a synthetic sponge with a light detergent. Do not use wire and abrasive cleaners.

• Water droplets may be created in the region over the filter holder and drip onto the base of the product during operation. Wipe the area with a clean, dry cloth after each use of the device.

• Use a damp cloth to gently wipe the plate. Never use abrasive detergents for cleaning.

Descaling

1. Buy a suitable descaler from a supermarket.
2. Please follow the instructions indicated on the packaging of the descaler to descale the machine.
3. After descaling, run the coffee machine, at least three times with full tanks of water (without coffee), to clean it out.
4. Wash the parts. See “Cleaning and maintenance” section.

Technical Characteristics

• Model: Coffee Maker IZ-6103 IZZY
• Rated voltage / Frequency: 220-240V ~50-60Hz
• Power: 1000W
• Water tank capacity: 1.8L
• Carafe capacity: 15-17 cups

Important Information for Correct Disposal of the Product in Accordance with EC Directive 2002/96/EC

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

Guarantee & Customer Service

• BENRUBI Company guarantees its products for any manufacturing defect or defective materials for a period of two (2) years from the date of purchase or delivery by presenting purchase receipt. If your product malfunctions or you find any defects, please revert to the retail location you have purchased it from or contact an authorized BENRUBI Service Centre. To find the nearest authorized BENRUBI Service Centre, visit our website www.benrubi.gr. It is in the discretion of BENRUBI Company to replace or repair the defective product.

• The warranty does not cover damages resulting from normal wear, breakage, scaling, improper installation or maintenance of the product, mishandling, abnormal working conditions, failure to implement the instructions, conversion or repair of the product by an unauthorized technician who does not belong to the BENRUBI Service Centers.
  Also, the warranty does not cover the following indicative factors:

• Stains, discoloration or scratches.

• Burns due to exposure to heat or flame.

• Damage from thermal shock (sudden temperature change or change of voltage).

FOR MORE INFORMATION

FOR MORE INFORMATION PLEASE CONTACT:

(NEW) H. BENRUBI & FILS SA 27 Aghiou Thoma str, GR15124, Maroussi – Athens, Tel./

Customer Support

• +30210 6156400
• e-mail: benrubi-sda@benrubi.gr

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>