Izzy MILANO 6616S Filter Coffee Maker Instruction Manual

Izzy MILANO 6616S Filter Coffee Maker

Safety interlocks

Please read these instructions carefully before using the appliance and save them for future reference. Please keep the sales receipt for guarantee purposes (please see below “Guarantee and Customer Service”) Any use which does not conform to the instructions will absolve IZZY from any liability.

• Before you connect the appliance on the supply mains, check that the voltage indicated on the data plate of the appliance corresponds to that of the voltage mains in your home. If this is not the case, do not use the appliance and contact one of the authorized BENRUBI Service Centres.
• Always connect your appliance by means of an earthed plug. Non-compliance with this obligation can cause an electric shock and may lead to serious injury. It is vital for your own safety that the earthed socket corresponds to the electrical installation standards in force in your country. If your household electrical system does not include an earthed socket, you must call in an authorized technician be-fore plugging in the appliance, in order to bring your electrical system up to standard.
• To avoid the risk of electric shock, do not immerse the power cord, the plug or the main unit of the appliance in water or any other liquids.
• Do not touch the hot surfaces of the appliance. Always use potholders when handling or removing the lid, the bowls, the separator rings and the drip tray to avoid steam burns.
• Close supervision is necessary when the appliance is used by or near children or handicapped people.
• Children should be supervised to ensure that they do not play with the appliance.
• Unplug the appliance when not in use. Unplug the appliance when you put on or remove parts.
• Unplug the appliance and allow it to cool down completely before any cleaning or maintenance operations.
• Always place the appliance on a flat, smooth and dry surface.
• Do not use the appliance if it has been dropped or damaged in any way and contact an authorized BENRUBI Service Centre.
• Do not use the appliance if there are visible signs of damage and contact an authorised BENRUBI Service Centre.
• If the appliance is not operating normally, disconnect it from the power supply and contact an authorized BENRUBI Service Centre.
• Check the power cord periodically for possible damages.
• In the event of faults, defects or a suspected defect following a fall, immediately remove the plug from the socket outlet. Never put the de-fective appliance into operation and contact an authorized BENRUBI Service Center.
• If the power cable of this appliance is damaged, it must be replaced by an authorized BENRUBI Service Center.
• Never leave the power cord wrapped during use. Unwind it com-pletely.
• Any repairs made by a non-authorized BENRUBI Service Center CANCEL THE GUARANTEE.
• Do not operate any appliance with a damaged cord or plug or if the appliance malfunctions or if it has been damaged in any way and con-tact an authorized BENRUBI Service Center.
• Never pull the power cord to disconnect the appliance from the elec-trical outlet. Instead, grasp the plug and pull it to disconnect.
• Do not use the appliance outdoors.
• Do not leave the power cord hanging over the edge of the table or counter where it can be reached by children or touching hot surfaces.
• Do not operate the appliance while empty.
• Do not place the appliance on top or near any source of heat (hot gas, or electric burner or heated oven) or on top or near surfaces where it can get wet.
• Use of extension cords not authorized by the appliance’s manufacturer may cause damage, injuries and accidents.
• Extreme caution must be paid when moving an appliance containing hot food or water or other hot liquids.
• Do not use this appliance for other than its intended use as indicated in the instructions manual.
• Do not use attachments or filters not recommended by the manufacturer.
• Do not use the appliance in the presence of or close to explosive or flammable substances.
• Unplug the appliance from the mains supply:
  • Before cleaning or maintenance operations
  • Immediately after use
• Never use highly corrosive or abstractive cleaning agents.
• Store the unit out of the reach of children.
• This appliance is intended for normal household use only.
• Extension cords may be used if care is exercised in their use. If an extension cord is used:
  • Its electrical rating should be at least that of the appliance.
  • It should be positioned so that it will not drape over the counter or table top where it may be pull on by children or trip over.
• For your safety, this appliance conforms to the applicable standards, regulations and directives (Low Voltage, Electromagnetic Compatibility, Environmental etc. Directives).

Parts of the Appliance

1. Top lid
2. Water tank
3. Water gauge
4. Filter basket
5. Anti-drip valve
6. Glass jug
7. Warm plate
8. On / Off switch – Power light
9. Permanent filter

Features

Drip Stop Function
Allows you to interrupt the brewing cycle and pour a cup of coffee before brewing cycle is fin-ished. To restart the brewing process, return carafe to warming plate and coffee will automati-cally begin flowing through filter basket. Make sure carafe is placed all way on the warming plate.
CAUTION: Do not remove carafe for longer than 30 seconds or the filter basket may overflow.

Water Window
The cups numbers indicate how many cups of water have been poured into the water tank.

Power Light
Power Light lets you know when the coffee maker is “On” for safe operation.

Cone-Shaped Filter Holder
The cone-shaped filter holder enriches flavor and prevents bitter taste.

Permanent Filter
Permanent and washable filter for easy use. Extra paper filter is not necessary.

How to Use your Coffee Maker

Before the First Use

• Carefully unpack the coffee maker and remove all packaging materials.
• Before making coffee in your coffee maker, thoroughly clean the carafe, carafe lid and permanent filter with warm, soapy water. Rinse and dry. Do not use harsh or abrasive cleaners.
• You may wipe the warming plate with a clean damp cloth. However, do not immerse the cof-fee maker in water or other liquid.
• Prior to brewing your first pot of coffee, operate coffee maker once or twice with water but without ground coffee. This will remove any dust that may have settled inside the coffee maker (which might affect the flavor of coffee).
  IMPORTANT: Use only cold water for best results.

Preparing the Coffee Maker for Brewing Coffee

• Place your coffee maker on a flat and stable surface.

• Plug the unit to the outlet.

• Fill with water the reservoir, close the lid and place the glass carafe on the warming plate.
  NOTE : The amount of brewed coffee after the brewing process will always be slightly less than the amount of water placed into the coffee maker, since some water is absorbed by the coffee ground or evaporates. Add a little extra water at the beginning so that you end up with the
  exact number of cups desired.

• Swing the filter basket door and place the permanent filter in the filter basket. Fill the filter with the required amount of coffee.

• Use one coffee measure of ground for each cup of coffee. The amount of coffee may be adjusted to suit your particular taste by decreasing or increasing the amount of coffee used.
  NOTE: Be sure to use coffee grounds prepared specifically for automatic drip coffee makers.

• The lid of the glass carafe must be placed properly on the carafe during the brewing process.

• Press the power button, the light will go on indicating that the coffee maker has begun the brewing cycle.
  NOTE: Usu the aroma regulator to obtain milder or stronger coffee.

  1. To obtain milder coffee, turn the aroma regulator to position
  2. To obtain stronger coffee, turn the aroma regulator to position

• The appliance will brew until the water tank is emptied, then automatically enter into a keep-warm mode (the warm plate will keep the brewed coffee warm at above 75ºC) until the appli-ance switches into off mode within 40 minutes.

• Press the power button when the carafe is empty or when the coffee maker is not in use.

• Unplug from the socket

Hints for Great Tasting Coffee

• A clean coffee maker is essential for making great tasting coffee. Regular cleaning, as specified in “Cleaning and Maintenance” is highly recommended.
• Always use fresh, cold water in your coffee maker.
• Fine-ground coffee promotes fuller extraction and provides rich, full-tasting coffee. The regular ground will require slightly more coffee per cup to provide the strength of a finer grind.
• Store coffee in a cool, dry place. Once coffee has been opened, keep it tightly sealed in the refrigerator to maintain freshness.
• For optimum coffee, buy whole beans and grind them just before brewing.
• Do not re-use coffee grounds since this will greatly impair coffee flavor.
• Reheating coffee is not recommended. Coffee has optimum flavor immediately after brewing.
• Small oil droplets on the surface of brewed black coffee, is due to the extraction of oil from the coffee grounds. Oiliness may occur more frequently if heavily roasted coffees are used.

Cleaning and Maintenance

NOTE: Always make sure coffee maker is unplugged and warming plate is cool before attempting to clean. To protect against electric shock, do not immerse cord, plug or unit in water or other liquid.

• The outside of your coffee maker can be cleaned by wiping the surface with a damp, soft cloth.
• • Glass carafe and carafe lid may be washed with warm, soapy water or placed in the top rack of the dishwasher. Do not place any other parts of the coffee maker in the dishwasher.
• You may he permanent filter under running water.
• Do not clean the inside of the water reservoir with a cloth, as the cloth may have a lint residue that could clog the coffee maker.
• For stubborn stains, use a nylon pad or soft sponge with a non–abrasive cleaner. Do not use metal scouring pads or abrasive cleansers.
• Calcium deposits may build up in the coffee maker as a result of minerals commonly found in drinking water. The built–up is normal and may result in a slower brewing time. The slow down can be eliminated by periodically decalcifying the coffee maker.
• To decalcify, fill the carafe with cold water and two tablespoons of while vinegar. Pour the solution into the water reservoir, and then close the lid. Place the carafe on the warming plate and allow the coffee maker to brew the vinegar solution. While decalcifying, do not use coffee in the filter. When the vinegar solution has finished brewing, empty the carafe and rinse it out with cold water. Refill the water reservoir with cold water and run another brew cycle to remove any remaining vinegar solution. Repeat if necessary.

Descaling

The appliance has to be descaled regularly, otherwise the coffee taste will become bad and the scale deposited inside in the machine may cause permanent and irreparable damage to the machine. If you begin to notice the increase of noise during boiling, or a longer time of brewing time, or the appliance switches off before the water tank is empty, these are indications that descaling is necessary. The frequency depends on the water hardness and the brewing frequency. Generally, the de-scaling should be done in the following periodicity:

• With soft water, at least once every 3 months.
• With hard water, at least once every month.

It is recommended to use only liquid descaler suitable for coffee maker and read carefully the instructions on its package or user manual before use.

1. Mix adequate descaler with cold water in a measuring jug.
   NOTE: Never use a powder descaler.

2. Fill the water tank up to the MAX level with the prepared solution.

3. Operate the appliance until the water tank is empty as if you brewed coffee, but without pa-per filter and ground coffee in the filter holder.

4. Repeat steps 1 to 3 for another descaling cycle.
   NOTE: Never refill the water tank with the used descaling solution because it is no longer active.

5. Operate two more brewing cycles with fresh, cold water to remove all descaler solution residues.

IMPORTANT:

1. Never interrupt the descaling process.
2. Malfunctions caused by scale deposited inside the appliance are not covered by the guarantee if the descaling process is not carried out properly.

Troubleshooting

corresponds to the local mains voltage
Make sure the appliance has been plugged in and switched on
Water leaks out of the appliance| Check if the water tank if filled beyond the MAX level
The appliance produces a lot of noise and steam during brewing| Make sure the water tank is not filled with hot water
The appliance needs to be descaled (see chapter “Descaling”)
Coffee grounds enter into the jug| Check if the filter holder has overflowed because there is too much ground coffee in the filter, or the jug has not been placed correctly under the filter holder, or you, remove the jug for more than 30 seconds during brewing.
---|---
Check if the filter is torn or you use the wrong size of paper filter
Brewing coffee takes longer than usual| The appliance needs to be descaled (see chapter “Descaling”)
The coffee maker switches off before the water tank is empty| The appliance needs to be descaled (see chapter “Descaling”)
The coffee is not strong enough| Check if used ground coffee is not enough. It should be one heaped measuring spoon of ground coffee for each cup
Check if you use ground coffee with mild flavour
Check if you have not used the aroma function
The coffee is too strong| Check if used too much ground coffee. It should be one heaped measuring spoon of ground coffee for each cup
Check if you have used ground coffee with strong flavour
Check is you have used the aroma function
The coffee does not taste good| Check if you leave the glass jug with coffee on the warm plate for too long, especially if it only contains a small amount of coffee
The coffee is not hot enough| Check if the brewed coffee is too little. The coffee will warm longer if you brew more
Make sure you place the glass jug properly on the warm plate
The jug is difficult to place in the appliance or remove from the appli- ance| Make sure the lid of the jug and filter basket are in right position
Tilt the jug a little of angle to place or remove it. Be careful not to spill the hot coffee for avoiding scald
There is less coffee in the jug than expected| Check if you have not placed the jug properly on the warm plate, so that the anti-drip valve prevents the coffee from flowing out of the filter
The appliance needs to be descaled (see chapter “Descaling”)

Technical Characteristics

• Model: Coffee Maker Milano 6616S / Coffee Maker Crème 6616S
• Voltage: 220V-240V～ 50/60Hz
• Rated Input: 1000W

Important information

Important information for correct disposal of the product in accordance with EC Directive 2002/96/EC
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household device separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household devices separately, the product is marked with a crossed-out wheeled dustbin.

Guarantee & Customer Service

• BENRUBI Company guarantees its products for any manufacturing defect or defective materials for a period of two (2) years from the date of purchase or delivery by presenting purchase receipt. If your product malfunctions or you find any defects, please revert to the retail location you have purchased it from or contact an authorized BENRUBI Service Centre. To find the nearest authorized BENRUBI Service Centre, visit our website www.benrubi.gr. It is in the discretion of BENRUBI Company to replace or repair the defective product.
• The warranty does not cover damages resulting from normal wear, breakage, scaling, improper installation or maintenance of the product, mishandling, abnormal working conditions, failure to implement the instructions, conversion or repair of the product by an unauthorized technician who does not belong to the BENRUBI Service Centers.

Also, the warranty does not cover the following indicative factors:

• Stains, discoloration or scratches.
• Burns due to exposure to heat or flame.
• Damage from thermal shock (sudden temperature change or change of voltage).

FOR MORE INFORMATION PLEASE CONTACT:
(NEW) H. BENRUBI & FILS SA
27 Aghiou Thoma str, GR15124, Maroussi – Athens,
Tel.: 210 6156400,
e-mail: benrubi-sda@benrubi.gr

FOR FURTHER INFORMATION:
(NEW) H. BENRUBI & FILS S.A.
27 Aghiou Thoma str. GR 15124, Maroussi-Athens
Tel: +302106156400,
Fax: +302106199316
e-mail: benrubi-sda@benrubi.gr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>